1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 10299:2000 ICS 49.
2、030.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Aerospace Rivets, solid Material and metric series identificationThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Commi
3、ttee and comes into effect on 15 February 2001 BSI 02-2001 ISBN 0 580 36691 X BS ISO 10299:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 10299:2000 and implements it as the UK national standard. The UK participation in
4、 its preparation was entrusted by Technical Committee ACE/12, Aerospace Fasteners and Fastening Systems, Details and Parts, to Subcommittee ACE/12/1, Aerospace Fasteners and Fastening Systems, Details and Parts (international), which has the responsibility to: aid enquirers to understand the text; p
5、resent to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee
6、 can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using
7、the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity fr
8、om legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issue
9、d.INTERNATIONAL STANDARD ISO 10299 First edition 2000-08-15 Reference number ISO 10299:2000(E) Aerospace Rivets, solid Material and metric series identification Aronautique et espace Rivets ordinaires Identification du matriau et de la srie mtriqueISO 10299:2000(E) iiISO 10299:2000(E) iii Foreword I
10、SO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical com- mittees. Each member body interested in a subject for which a technical
11、 committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liai- son with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of el
12、ectrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard require
13、s approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard
14、 ISO 10299 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 4, Aerospace fastener systems.INTERNATIONAL STANDARD ISO 10299:2000(E) 1 Aerospace Rivets, solid Material and metric series identification 1 Scope This International Standard specifies the marks al
15、lowed to identify material and metric series on solid rivets for use in aerospace construction. It applies when reference is made to this International Standard in the product standard or definition document. 2 Normative reference The following normative document contains provisions which, through r
16、eference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publica- tions do not apply. However, parties to agreements based on this International Standard are encouraged to investi- gate the possibility
17、of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain reg- isters of currently valid International Standards. ISO/TR 12198:1998, Aerospace Rivets, solid
18、Materials. 3 Requirements 3.1 Marking Marks shall be legible. 3.2 Material identification The identification of the material shall be marked on the head of the rivet, see Tables 1 and 2. Location is left to the manufacturers discretion. However, marking shall not cause interference when setting. Tab
19、le 1 positions marks in relation to shank diameter drawn up in dotted lines. Only materials given in ISO/TR 12198 are indicated Table 1. 3.3 Metric series identification See Figure 1. Marking shall not cause interference when setting. This symbol shall be legible to the unaided eye. 3.4 Complementar
20、y requirements Complementary requirements (for example coloration) shall be specified in the product standard or definition document.ISO 10299:2000(E) 2 Table 1 Material identification Material Symbol a Family Designation Aluminium alloys Al99,5 (1050A) (no marking) Al4Cu0,7Mg0,7Mn (2017A) embossed
21、Al4,4Cu1,5Mg0,6Mn (2024) embossed Al2,6Cu0,3Mg (2117) indented Al6,3Cu0,3Mn0,06Ti (2219) indented Al5Mg0,3Mn (5056A) embossed Al6,2Zn2,3Cu2,2Mg0,1Zr (7050) embossed Al4Cu0,4Mn0,2Mg (V65) (no marking) Corrosion-resistant steels X2CrNi19-11 (AISI 304L) indented X6NiCrTiMoV26-15 (A286) embossed Nickel
22、alloys Ni30Cu (Monel 400) embossed Ni19Cr0,4Ti (Nimonic 75) indented NiCr22Fe18Mo9 (Hastelloy X) embossed Ni16Cr7Fe3Ti1Nb1Al (Inconel X750) indented Titanium (commercially pure) (T40) embossed Titanium alloy Ti44,5Cb indented a Dimensions are given in Table 2.ISO 10299:2000(E) 3 Table 2 Dimensions o
23、f symbols Dimensions in millimetres Symbol Height or depth Position Width embossed 0,2 max. indentedISO 10299:2000(E) 4 4D r i l ls t a r t The drill start option will be indicated by a code in the rivet designation. The dimensions of the drill start, located in the centre of the rivet head, are as
24、follows: d i a m e t e r : m a x . ; depth: max. Dimensions in millimetres Key 1 Shank diameter 2 Radiused tail end diameter a Dot, indented on the tail end to a depth of 0,2 max. Figure 1 0,8 mm 0,2 mmBS ISO 10299:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | |
25、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible fo
26、r preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or
27、editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on th
28、e inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications sho
29、uld be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standa
30、rds, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on a
31、ll its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membe
32、rship Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodie
33、s. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free u
34、se, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
