1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 32100:2010Rubber- or plastics-coated fabrics Physicaland mechanical tests Determination of flexresistance by the flexometermethod (ISO 32100:2010)Licensed Copy: Wang Bi
2、n, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO32100:2010.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/69, Footwear, leather
3、and coated fabrics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 67540 9ICS 59.080.40Com
4、pliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAND
5、ARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 32100 December 2010 ICS 59.080.40 English Version Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2010)
6、 Supports textiles revtus de caoutchouc ou de plastique - Essais physiques et mcaniques - Dtermination de la rsistance la flexion laide dun flexomtre (ISO 32100:2010) Mit Kautschuk oder Kunststoff beschichtete Textilien - Physikalische und mechanische Prfungen - Bestimmung der Dauerbiegefestigkeit n
7、ach dem Flexometer-Verfahren (ISO 32100:2010) This European Standard was approved by CEN on 10 December 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter
8、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made
9、 by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estoni
10、a, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPI
11、SCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 32100:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontroll
12、ed Copy, (c) BSIBS EN ISO 32100:2010EN ISO 32100:2010 (E) 3 Foreword This document (EN ISO 32100:2010) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 45 “Rubber and rubber
13、products”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that s
14、ome of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to im
15、plement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
16、Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv 1 Scope1 2 Normative references1 3 Terms and definitions .1 4 Princip
17、le .2 5 Apparatus.2 6 Test specimens4 6.1 Sampling 4 6.2 Number of test specimens5 6.3 Conditioning of the test specimens 5 7 Procedure.5 8 Expression of results10 9 Test report10 Annex A (normative) Important clarifications12 Bibliography13 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/
18、04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is
19、 normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part
20、 in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to pr
21、epare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that
22、 some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 32100 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee ISO/TC 45, Rubber and
23、rubber products, Subcommittee SC 4, Products (other than hoses), in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010INTERNATIONAL STAN
24、DARD ISO 32100:2010(E) ISO 2010 All rights reserved 1Rubber- or plastics-coated fabrics Physical and mechanical tests Determination of flex resistance by the flexometer method 1 Scope This International Standard specifies a test method for determining the flex resistance of rubber- or plastics-coate
25、d fabrics in the folded condition. The test method is applicable only to products which can be clamped in the test apparatus used and to products with which the fold made in the test specimen can be caused to move back and forth along the specimen during the test. The appearance of the test specimen
26、, after completion of either the flex number (see 3.1) or a specified number of flex cycles, is taken as a measure of the flex resistance in the folded condition. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, o
27、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3, Preferred numbers Series of preferred numbers ISO 2231:1989, Rubber- or plastics-coated fabrics Standard atmospheres for conditioning and testing ISO 2768-1
28、, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 flex number number (agreed between the interested parties) of flex cycles to wh
29、ich the test specimen is subjected, the specimen being subsequently examined using a magnifying lens with 6 magnification to determine whether any damage or other visible change is observable 3.2 flex cycle cycle comprising one forward and one backward (i.e. a complete to-and-fro) movement of the mo
30、veable clamp of the test apparatus Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) 2 ISO 2010 All rights reserved4 Principle One end of a test piece is folded with the surface to be tested facing inwards and cla
31、mped in an upper (moveable) clamp and the other end of the test piece is folded with the surface to be tested facing outwards and clamped in a lower (fixed) clamp. The upper clamp is then moved in such a way that the fold is caused to run along the test piece. The test piece is examined periodically
32、 for damage or any other visible change. 5 Apparatus The test rig consists of a moveable upper clamp as shown in Figure 1 to Figure 3 and a fixed lower clamp as shown in Figure 4. Both clamps shall lie in the same plane. The moveable clamp shall be pivoted so that it can be driven to swivel through
33、22,5 about pivot point A. During the test, the moveable clamp shall be swivelled at a frequency of (100 5) swivels per minute using a motor drive. It shall also be possible to swivel the clamp by hand. With the two clamps aligned in the same plane, the distance between the upper edge of the lower cl
34、amp and the flange (3) on the front plate of the upper clamp shall be 25 mm (see Figure 1 and Figure 8). Dimensions in millimetres General tolerances in accordance with ISO 2768-1, tolerance class m Key 1 front plate 2 back plate 3 flange on front plate Figure 1 Upper (moveable) clamp Licensed Copy:
35、 Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) ISO 2010 All rights reserved 3Dimensions in millimetres General tolerances in accordance with ISO 2768-1, tolerance class m Key A pivot point Figure 2 Back plate (Ref. No. 2 in
36、Figure 1) of upper clamp Dimensions in millimetres General tolerances in accordance with ISO 2768-1, tolerance class m Figure 3 Front plate (Ref. No. 1 in Figure 1) of upper clamp Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010I
37、SO 32100:2010(E) 4 ISO 2010 All rights reservedDimensions in millimetres General tolerances in accordance with ISO 2768-1, tolerance class m Figure 4 Lower (fixed) clamp 6 Test specimens 6.1 Sampling From the product to be tested, take test specimens either of dimensions 70 mm 45 mm or, in certain c
38、ases as described in 7.3, in accordance with Figure 5. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) ISO 2010 All rights reserved 5Dimensions in millimetres General tolerances in accordance with ISO 2768-1, to
39、lerance class m Figure 5 Test specimen for special cases (see 7.3) 6.2 Number of test specimens Cut at least three test specimens from the sheet longitudinal to the direction of manufacture and at least another three test specimens perpendicular to the direction of manufacture. 6.3 Conditioning of t
40、he test specimens Prior to testing, condition the test specimens in standard atmosphere B as defined in ISO 2231:1989 (23 C and 50 % r.h.) for the length of time specified in ISO 2231:1989. 7 Procedure 7.1 Unless otherwise specified, carry out the test in standard atmosphere B as defined in ISO 2231
41、:1989. Fold a conditioned test specimen (see 6.3) along its longitudinal axis with the surface to be evaluated facing inwards and the longer edges flush with each other. Then, clamp the folded test specimen horizontally in the upper (moveable) clamp, which shall be in the same plane as the lower (fi
42、xed) clamp, so that the specimen is adjacent to the clamp bolt and supported on the flange on the front plate (see Figure 6). Fold the free end of the test specimen outwards over the inclined edges of the moveable clamp so that the specimen surface to be evaluated is now facing outwards (see Figure
43、7). Hold the corners together and clamp them in the lower (fixed) clamp with the fold vertical and without producing any tensile strain in the specimen (see Figure 8). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:201
44、0(E) 6 ISO 2010 All rights reservedFigure 6 Test specimen clamped in upper clamp Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) ISO 2010 All rights reserved 7Figure 7 Test specimen clamped in upper clamp with t
45、he free end folded outwards over the sloping edges of the clamp Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) 8 ISO 2010 All rights reservedDimensions in millimetres General tolerances in accordance with ISO 2
46、768-1, tolerance class m Figure 8 Test apparatus in starting position with the test specimen clamped in place Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) ISO 2010 All rights reserved 97.2 Programme the test
47、rig to carry out either an agreed number of flex cycles (the flex number see 3.1) or to carry out the test at the intervals recommended in Table 1. Set the upper clamp in motion. During the swivelling motion, the fold shall run up and down along the test specimen (see Figure 9). After completion of
48、the relevant number of flex cycles, check the test specimen for damage or other visible change by examining it under a magnifying lens with 6 magnification. NOTE The numbers of flex cycles given in Table 1 are stepped in accordance with the R 10 series specified in ISO 3 (see Annex A). Table 1 Prefe
49、rred intervals, i.e. number of flex cycles completed, at which test specimens should be examined 200 315 500 800 1 250 2 000 3 150 5 000 8 000 12 500 20 000 31 500 50 000 80 000 125 000 200 000 315 000 500 000 Figure 9 Test apparatus and test specimen in the fully swivelled position Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 32100:2010ISO 32100:2010(E) 10 ISO 2010 All rights reservedIf testing was carried out at
