1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 20345:2011Personal protective equipment Safety footwear (ISO20345:2011)Copyright European Committee for Standardization Provided by IHS under license with CENNot for Re
2、saleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20345:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO20345:2011. It supersedes BS EN ISO 20345:2004 which is withdrawn.The UK participation in its preparation was entrust
3、ed to TechnicalCommittee PH/1, Safety, protective and occupational footwear.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctap
4、plication. The British Standards Institution 2012ISBN 978 0 580 67093 0ICS 13.340.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issu
5、ed since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20345 December 2011 ICS 13.340.50 S
6、upersedes EN ISO 20345:2004English Version Personal protective equipment - Safety footwear (ISO 20345:2011) quipement de protection individuelle - Chaussures de scurit (ISO 20345:2011) Persnliche Schutzausrstung - Sicherheitsschuhe (ISO 20345:2011) This European Standard was approved by CEN on 14 De
7、cember 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
8、obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to th
9、e CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo
10、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights
11、 of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20345:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO
12、20345:2011EN ISO 20345:2011 (E) 3 Foreword This document (EN ISO 20345:2011) has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors”, the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 94 “Personal safety - Protective clothing and equipmen
13、t“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of
14、the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 20345:2004. This document has been prepared under a mandate given to CEN by the European Commission and t
15、he European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
16、countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
17、Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20345:2011EN ISO 20345:2011 (E) 4 Annex ZA (informative) Re
18、lationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming
19、to Essential Requirements of the New Approach Directive 89/686/EEC Personal Protective Equipment. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative
20、 clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 Clauses of this European Standard addressing Essential Requi
21、rements or other provisions of EU Directives Clauses of this European Standard Essential requirements (ERs) of EU Directive 89/686/EEC Annex II 1. General requirements applicable to all PPE 5.3.4 1.1.1 Ergonomics5.3.4 1.1.2.1 Highest level of protection possible 1.2 Innocuousness of PPE 5.3.2.2; 5.4
22、.8; 5.8.5; 6.2.1.2; 6.2.1.3; 6.2.5; 6.3.1 1.2.1 Absence of risks and other inherent nuisance factors 5.4.7; 5.4.9; 5.5.4; 5.5.5; 5.6.2; 5.6.3; 5.7.2; 5.7.5 1.2.1.1 Suitable constituent materials 5.3.4 1.2.1.2 Satisfactory surface condition of all PPE parts in contact with the user 5.3.4 1.2.1.3 Maxi
23、mum user impediment1.3 Comfort and efficiency 5.3.1.2; 5.3.2.5.1; 5.3.2.5.2; 5.4.3; 5.4.4; 5.4.5; 5.5.1; 5.5.2; 5.6.1; 5.7.4; 5.8.2; 5.8.3; 5.8.4; 5.8.6; 6.2.1.4; 6.2.1.5.1; 6.4.1; 6.4.2 1.3.2 Lightness and design strength 8 1.4 Information supplied by the manufacturer 5.4.6; 5.5.3 2.2 PPE enclosing
24、 the parts of the body to be protected 6.2.2.1; 6.2.2.2 2.6 PPE for use in explosive atmospheres 6.1; 7 2.12 PPE bearing one or more identification or recognition marks directly indirectly or relating to health and safety 3.1 Protection against mechanical impact 5.3.2.3; 6.2.4; 6.2.6; 6.2.7 3.1.1 Im
25、pact caused by falling objects and collision of parts of the body with an obstacle Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20345:2011EN ISO 20345:2011 (E) 5 Tab
26、le ZA.1 (continued) Clauses of this European Standard Essential requirements (ERs) of EU Directive 89/686/EEC Annex II 5.3.5 3.1.2 Prevention of falls due to slipping 5.3.2.4 3.2 Protection against (static) compression of part of the body 6. 2.1.1; 6.2.1.5.2; 6.2.8 3.3 Protection against physical in
27、jury (abrasion, perforation, cuts, bites) 6.2.3.1 3.6 Protection against heat and/or fire 6.2.3.2 3.7 Protecti against cold6.2.2.3 3.8 Protection against electric shock WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. C
28、opyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20345:2011ISO 20345:2011(E) ISO 2011 All rights reserved iiiContents Page Foreword iv 1 Scope 1 2 Normative references 1
29、3 Terms and definitions . 1 4 Classification and designs . 6 5 Basic requirements for safety footwear 8 5.1 General . 8 5.2 Design . 10 5.3 Whole footwear 11 5.4 Upper 14 5.5 Vamp and quarter lining . 16 5.6 Tongue 17 5.7 Insole and insock 17 5.8 Outsole . 18 6 Additional requirements for safety foo
30、twear 19 6.1 General . 19 6.2 Whole footwear 20 6.3 Upper Water penetration and absorption . 24 6.4 Outsole . 24 7 Marking . 24 8 Information to be supplied . 25 8.1 General . 25 8.2 Electrical properties 26 8.3 Insocks . 27 Annex A (normative) Hybrid footwear 28 Bibliography 30 Copyright European C
31、ommittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20345:2011ISO 20345:2011(E) iv ISO 2011 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide
32、federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that c
33、ommittee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in acco
34、rdance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requi
35、res approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 20345 was prepared by the Euro
36、pean Committee for Standardization (CEN) Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with Technical Committee ISO/TC 94, Personal safety Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the Agreement on technical cooperation betw
37、een ISO and CEN (Vienna Agreement). This second edition cancels and replaces the first edition (ISO 20345:2004), which has been technically revised. It also incorporates the Amendment ISO 20345:2004/Amd. 1:2007 and the Technical Corrigenda ISO 20345:2004/Cor.1:2005 and ISO 20345:2004/Cor.2:2006. Cop
38、yright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20345:2011INTERNATIONAL STANDARD ISO 20345:2011(E) ISO 2011 All rights reserved 1Personal protective equipment Safety footw
39、ear 1 Scope This International Standard specifies basic and additional (optional) requirements for safety footwear used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour. Special risks are covered by complementary job-related standar
40、ds (e.g. footwear for firefighters, electrical insulating footwear, protection against chain saw injuries, protection against chemicals and molten metal splash, protection for motor cycle riders). 2 Normative references The following referenced documents are indispensable for the application of this
41、 document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 17075, Leather Chemical tests Determination of chromium(VI) content ISO 20344:2011, Personal protective equipment Test method
42、s for footwear EN 12568:2010, Foot and leg protectors Requirements and test methods for toecaps and penetration resistant inserts EN 50321, Electrically insulating footwear for working on low voltage installations 3 Terms and definitions For the purposes of this document, the following terms and def
43、initions apply. NOTE The component parts of footwear are illustrated in Figures 1 and 2. 3.1 safety footwear footwear incorporating protective features to protect the wearer from injuries that could arise through accidents NOTE Items of safety footwear are fitted with toecaps designed to give protec
44、tion against impact when tested at an energy level of at least 200 J and against compression when tested at a compression load of at least 15 kN. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without licen
45、se from IHS-,-,-BS EN ISO 20345:2011ISO 20345:2011(E) 2 ISO 2011 All rights reserved3.2 leather hide or skin tanned to be imputrescible 3.2.1 leather split flesh or middle part of a hide or skin, obtained by splitting a thick leather, which is tanned to be imputrescible 3.3 rubber vulcanized elastom
46、ers 3.4 polymeric materials large molecules composed of repeating structural units (monomers) typically connected by chemical bond EXAMPLE Polyurethane (PU) or polyvinylchloride (PVC). 3.5 insole non-removable component used to form the base of the shoe to which the upper is usually attached during
47、lasting 3.6 insock removable or non-removable footwear component used to cover part or all of the insole NOTE “Non-removable” means that the insock cannot be removed without being damaged. 3.7 lining material covering the inner surface of the upper NOTE 1 The wearers foot is in direct contact with t
48、he lining. NOTE 2 Where an upper is split at the forepart to house the toecap, or if an external piece of material is stitched to the upper to form a pocket to house the toecap, the material under the toecap acts as a lining. 3.7.1 vamp lining material covering the inner surface of the forepart of the upper 3.7.2 quarter lining material covering the inner surface of the quarters of the upper 3.8 cleat protruding part of the outer surface of the sole 3.9 rigid outsole sole which cannot be bent through an angle of 45 under a load of 30 N NOTE Testing is performed in accordance with
