1、BS EN ISO10472-2:2008ICS 97.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSafety requirementsfor industrial laundrymachineryPart 2: Washing machines and washer-extractors (ISO 10472-2:1997)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08
2、:07, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 May2009. BSI 2009ISBN 978 0 580 63389 8Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 10472-2:2008National forewordThis British Standard is th
3、e UK implementation of EN ISO10472-2:2008. It is identical to ISO 10472-2:1997. It supersedes BS ENISO 10472-2:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/33, Textile machinery.A list of organizations represented on this committee can be ob
4、tained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAN
5、DARDS, 27/08/2009 08:07, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 10472-2October 2008ICS 97.060 Supersedes EN ISO 10472-2:1997 English VersionSafety requirements for industrial laundry machinery - Part 2:Washing machines and washer-extractors (ISO 10472-2:1997)
6、Exigences de scurit pour les machines de blanchisserieindustrielle - Partie 2: Machines laver et laveuses-essoreuses (ISO 10472-2:1997)Sicherheitsanforderungen fr industrielleWschereimaschinen - Teil 2: Wasch- undWaschschleudermaschinen (ISO 10472-2:1997)This European Standard was approved by CEN on
7、 12 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may b
8、e obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Ma
9、nagement Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Nor
10、way, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form an
11、d by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10472-2:2008: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:07, Uncontrolled Copy, (c) BSIBS EN ISO 10472-2:2008EN ISO 10472-2:2008 (E) 3 Foreword The text of ISO 10472-2:1997 has been prepared by Techn
12、ical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10472-2:2008 by Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of wh
13、ich is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the poss
14、ibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10472-2:1997. This document has been prepared under a mandate given to CEN by the Eu
15、ropean Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standard
16、s organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu
17、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10472-2:1997 has been approved by CEN as a EN ISO 10472-2:2008 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:07, Uncontrolled Copy,
18、 (c) BSIBS EN ISO 10472-2:2008EN ISO 10472-2:2008 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Tr
19、ade Association to provide a means of conforming to Essential Requirements of the New Approach Directive Machinery 98/37/EC, amended by 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at
20、 least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Di
21、rectives may be applicable to the product(s) falling within the scope of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:07, Uncontrolled Copy, (c) BSIBS EN ISO 10472-2:2008EN ISO 10472-2:2008 (E) 5 Annex ZB (informative) Relationship between this European Standar
22、d and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive Machinery 2006
23、/42/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard,
24、a presumption of conformity with the relevant Essential Requirements (except 1.4.2.1 2, 1.7.3, 1.7.4.2 t) and u) of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. Licens
25、ed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:07, Uncontrolled Copy, (c) BSIBS EN ISO 10472-2:2008ISO ISO 10472-2:1997(E)iiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standardsbodies (ISO member bodies). The work of prepari
26、ng International Standards is normally carried out throughISO technical committees. Each member body interested in a subject for which a technical committee hasbeen established has the right to be represented on that committee. International organizations,governmental and non-governmental, in liaiso
27、n with ISO, also take part in the work. ISO collaboratesclosely with the International Electrotechnical Commission (IEC) on all matters of electrotechnicalstandardization.Draft International Standards adopted by the technical committees are circulated to the member bodies forvoting. Publication as a
28、n International Standard requires approval by at least 75 % of the member bodiescasting a vote.International Standard ISO 10472-2 was prepared by Technical Committee ISO/TC 72, Textile machinery andmachinery for dry-cleaning and industrial laundering, Subcommittee SC 5, Industrial laundry anddry-cle
29、aning machinery.ISO 10472 consists of the following parts, under the general title Safety requirements for industrial laundrymachinery: Part 1: Common requirements Part 2: Washing machines and washer-extractors Part 3: Washing tunnel lines including component machines Part 4: Air dryers Part 5: Flat
30、work ironers, feeders and folders Part 6: Ironing and fusing pressesLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:07, Uncontrolled Copy, (c) BSIBS EN ISO 10472-2:2008ISO 10472-2:1997(E) ISOivIntroductionThis part of ISO 10472 is intended to instruct the designer of industrial
31、laundry machinery in a systematicmanner, focusing on his particular type of machine, regarding the relevant essential safety requirements,and to suggest possible state-of-the-art safety solutions.The extent to which hazards are covered is indicated in the scope of this part of ISO 10472. In addition
32、,machinery should comply as appropriate with ISO/TR 12100-1 and ISO/TR 12100-2 for hazards which are notspecifically referred to in this part of ISO 10472.All examples given in this part of ISO 10472 represent the state of the art. Equivalent solutions areacceptable, provided they attain at least th
33、e same safety level.The designer is presumed to have taken into account all the provisions of ISO 10472-1 before consideringthis part of ISO 10472.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:07, Uncontrolled Copy, (c) BSIBS EN ISO 10472-2:2008INTERNATIONAL STANDARD ISO ISO 1
34、0472-2:1997(E)1Safety requirements for industrial laundry machinery Part 2:Washing machines and washer-extractors1 ScopeThis part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washingmachines and washer-extractors of all configurations having a net usable c
35、age volume 60 l.This part of ISO 10472 does not cover particular hazards for drawer-type washer-extractors.This part of ISO 10472 does not cover the hazards caused by processing work which may create anexplosive or flammable atmosphere inside the machine.This part of ISO 10472 complements the basic
36、requirements as laid down in ISO/TR 12100-1 andISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards(see EN 1050) and on selecting measures for attaining the required safety level.This part of ISO 10472 does not apply to ancillary equipment, e.g. c
37、hemical supply pumps, steam valvesand supply pipe work, vent systems, work feed systems and discharge systems and ducting to theatmosphere.2 Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions ofthis part of ISO 10472. At the ti
38、me of publication, the editions indicated were valid. All standards are subjectto revision, and parties to agreement based on this part of ISO 10472 are encouraged to investigate thepossibility of applying the most recent editions of the standards indicated below. Members of IEC andISO maintain regi
39、sters of currently valid International Standards.ISO 10472-1:1997, Safety requirements for industrial laundry machinery Part 1: Common requirements.ISO/TR 12100-1:1992, Safety of machinery Basic concepts, general principles for design Part 1: Basicterminology, methodology.ISO/TR 12100-2:1992, Safety
40、 of machinery Basic concepts, general principles for design Part 2:Technical principles and specifications.ISO 13849-1:1), Safety of machinery Safety-related parts of control systems Part 1: General principlesfor design.ISO 13852:1996, Safety of machinery Safety distances to prevent danger zones bei
41、ng reached by theupper limbs.ISO 13853:1), Safety of machinery Safety distances to prevent danger zones being reached by the lowerlimbs.1)To be published.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:07, Uncontrolled Copy, (c) BSIBS EN ISO 10472-2:2008ISO 10472-2:1997(E) ISO2I
42、SO 14119:1), Safety of machinery Interlocking devices associated with guards Principles for designand selection.IEC 335-1:1991, Safety of household and similar electrical appliances Part 1: General requirements.IEC 335-2-7:1993, Safety of household and similar electrical appliances Part 2: Particula
43、r requirements forwashing machines.EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body.EN 953:1997, Safety of machinery General requirements for the design and construction of guards (fixed,movable).EN 1037:1995, Safety of machinery Prevention of unexpected sta
44、rt-up.EN 1050:1996, Safety of machinery Risk assessment.EN 1760-1:1997, Safety machinery Pressure sensitive protective devices Part 1: General principles forthe design and testing of pressure sensing mats and floors.EN 1760-2:1), Safety of machinery Pressure sensitive protective devices Part 2: Gene
45、ral principles forthe design and testing of pressure sensitive edges and pressure sensitive bars.EN 60204-1:1992, Safety of machinery Electrical equipment of machines Part 1: General requirements.IEC 204-1:1992, modified3 DefinitionsFor the purposes of this part of ISO 10472, the following definitio
46、ns apply.3.1washing machineMachine performing only those operations required for washing textiles.3.2washer-extractorMachine which combines the functions of textile washing and moisture extraction by centrifugal action.3.2.1fixed washer-extractorWasher-extractor in which the drum is rigidly mounted
47、in the frame.3.2.2suspended washer-extractorWasher-extractor in which the drum is not rigidly connected to the frame but is secured by means of avibration-reducing system.3.2.3tilting washer-extractorFixed or suspended washer-extractor in which the drum tilts during loading and/or unloading.1)To be
48、published.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:07, Uncontrolled Copy, (c) BSIBS EN ISO 10472-2:2008ISO ISO 10472-2:1997(E)33.2.4drawer-type washer-extractorFixed or suspended washer-extractor in which two halfcages slide horizontally out from the frame, in thelow posi
49、tion for loading and the high position for unloading.3.2.5top-loading, vertical axis washer-extractorWasher-extractor in which the plane of the loading door is at a right angle to the vertical axis of the rotationof the cage.3.3front-loading machineWashing machine or washer-extractor in which the plane of the loading door is at a right angle to thehorizontal axis of rotation of the cage.3.4side-loading machineWashing machine or washer-extractor in which the plane of the loading door is parallel to the
