1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-16:2010Textiles Quantitativechemical analysisPart 16: Mixtures of polypropylene fibresand certain other fibres (method usingxylene) (ISO 1833-16:2006)Licensed Copy
2、: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIBS EN ISO 1833-16:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO1833-16:2010. It is identical to ISO 1833-16:2006. It supersedes BS4407:1988 which will be withdrawn o
3、n publication of the otherparts of the BS EN ISO 1833 series.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not pur
4、port to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72137 3ICS 59.060.01; 59.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority o
5、f theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1833-16 October 2010 ICS 5
6、9.060.01 English Version Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) (ISO 1833-16:2006) Textiles - Analyse chimique quantitative - Partie 16: Mlanges de fibres de polypropylne et de certaines autres fibres (mtho
7、de au xylne) (ISO 1833-16:2006) Textilien - Quantitative chemische Analysen - Teil 16: Mischungen aus Polypropylenfasern und bestimmten anderen Fasern (Xylol-Verfahren) (ISO 1833-16:2006) This European Standard was approved by CEN on 12 September 2010. CEN members are bound to comply with the CEN/CE
8、NELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to a
9、ny CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions
10、. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven
11、ia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nat
12、ional Members. Ref. No. EN ISO 1833-16:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIBS EN ISO 1833-16:2010EN ISO 1833-16:2010 (E) 3 Foreword The text of ISO 1833-16:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the
13、International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-16:2010 by Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publicatio
14、n of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not
15、 be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,
16、Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1833-16:2006 has been approved
17、by CEN as a EN ISO 1833-16:2010 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIBS EN ISO 1833-16:2010ISO 1833-16:2006(E) ISO 2006 All rights reserved iiiForeword ISO (the International Organization for Standardization) is
18、a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represent
19、ed on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are dra
20、fted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International St
21、andard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1833-16 was prepar
22、ed by Technical Committee ISO/TC 38, Textiles. This first edition of ISO 1833-16 cancels and replaces Clause 15 of ISO 1833:1977. ISO 1833:1977 will be cancelled and replaced by ISO 1833-1, ISO 1833-3, ISO 1833-4, ISO 1833-5, ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9, ISO 1833-10, ISO 1833-11,
23、ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-15, ISO 1833-16, ISO 1833-17, ISO 1833-18 and ISO 1833-19. ISO 1833 consists of the following parts, under the general title Textiles Quantitative chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures
24、of acetate and certain other fibres (method using acetone) Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Part 7: Mixtures of polyamide and certain other fibres (meth
25、od using formic acid) Part 8: Mixtures of acetate and triacetate fibres (method using acetone) Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures of c
26、ellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disu
27、lfide/acetone) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIBS EN ISO 1833-16:2010ISO 1833-16:2006(E) iv ISO 2006 All rights reserved Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) Part 15: Mixtures of jute and c
28、ertain animal fibres (method by determining nitrogen content) Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) Part 18: Mixtures of silk an
29、d wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fibres and asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) The following parts are under prep
30、aration: Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) Part 22: Mixtures of viscose or certain types of cupro or modal or
31、 lyocell and flax fibres (method using formic acid and zinc chlorate) Part 23: Mixtures of polyethylene and polypropylene (method using cyclohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol and tetrachloroethane) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARD
32、S, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIBS EN ISO 1833-16:2010INTERNATIONAL STANDARD ISO 1833-16:2006(E) ISO 2006 All rights reserved 1Textiles Quantitative chemical analysis Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) 1 Scope This part of ISO 1833
33、 specifies a method, using xylene, to determine the percentage of polypropylene, after removal of non-fibrous matter, in textiles made of binary mixtures of polypropylene fibres and wool, animal hair, silk, cotton, viscose, cupro, modal, acetate, triacetate, polyamide, polyester, acrylic and glass f
34、ibres. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1833-1, Textile
35、s Quantitative chemical analysis Part 1: General principles of testing 3 Principle The polypropylene fibre is dissolved from a known dry mass of the mixture with boiling xylene. The residue is collected, washed, dried and weighed; its mass, corrected if necessary, is expressed as a percentage of the
36、 dry mass of the mixture. The percentage of polypropylene is found by the difference. 4 Reagents Use the reagent described in ISO 1833-1 as light petroleum together with that given in 4.1. 4.1 Xylene, distilling between 137 C and 142 C. SAFETY PRECAUTIONS The harmful effects of this reagent shall be
37、 borne in mind, and full precautions shall be taken during use. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIBS EN ISO 1833-16:2010ISO 1833-16:2006(E) 2 ISO 2006 All rights reserved5 Apparatus Use the apparatus described in ISO 1833-1 together wi
38、th those given in 5.1 and 5.2. 5.1 Conical flasks, of minimum capacity 200 ml, glass stoppered. 5.2 Reflux condenser, suitable for liquids of high boiling point, fitting the conical flasks. 6 Test procedure Follow the general procedure given in ISO 1833-1, and then proceed as follows. Preheat the fi
39、lter crucible through which the xylene is to be filtered. To the specimen contained in the conical flask, add 100 ml of the xylene per gram of specimen. Attach the condenser and boil the contents for 3 min. Decant the hot liquid through the weighed filter crucible. Repeat this treatment twice more,
40、each time using a fresh 50 ml portion of solvent. Wash the residue remaining in the flask with 30 ml of boiling xylene (twice). After the treatment with boiling xylene, ensure that the flask containing the residue is cooled sufficiently before the light petroleum is introduced. Then wash the residue
41、 remaining in the flask with 75 ml of the light petroleum (twice). After the second wash with light petroleum, filter the residue through the filter crucible and allow it to drain. Finally, dry the crucible and residue, then cool and weigh them. NOTE Hot extraction apparatus, using the appropriate p
42、rocedures, giving identical results, may be used.1)7 Calculation and expression of results Calculate the results as described in the general instructions of ISO 1833-1. The value of d is 1,00. 8 Precision For homogeneous mixtures of textile materials, the confidence limits of results obtained by thi
43、s method are not greater than 1 for the confidence level of 95 %. 1) See, for example, the apparatus described in Melliand Textilberichte 56 (1975), pp. 643-645. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIBS EN ISO 1833-16:2010Licensed Copy: Wa
44、ng Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS
45、, 26/05/2011 07:52, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal
46、 Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest ame
47、ndments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be
48、found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsY
49、ou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of t
