1、BSI Standards PublicationSurface acoustic wave (SAW) filters of assessed qualityPart 1: Generic specificationBS EN 60862-1:2015National forewordThis British Standard is the UK implementation of EN 60862-1:2015.It is identical to IEC 60862-1:2015. It supersedes BS EN 60862-1:2003 which is withdrawn.T
2、he UK participation in its preparation was entrusted to TechnicalCommittee EPL/49, Piezoelectric devices for frequency control and selection.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary
3、 provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 74143 2ICS 31.140Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publish
4、ed under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60862-1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60862-1 November 2015 ICS 31.140 Supersedes EN 60862-1:2003
5、English Version Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification (IEC 60862-1:2015) Filtres ondes acoustiques de surface (OAS) sous assurance de la qualit - Partie 1: Spcification gnrique (IEC 60862-1:2015) Oberflchenwellenfilter (OFW-Filter) mit bewerteter Qua
6、litt - Teil 1: Fachgrundspezifikation (IEC 60862-1:2015) This European Standard was approved by CENELEC on 2015-09-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard with
7、out any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any ot
8、her language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyp
9、rus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and t
10、he United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any
11、means reserved worldwide for CENELEC Members. Ref. No. EN 60862-1:2015 E BS EN 60862-1:2015EN 60862-1:2015 2 European foreword The text of document 49/1151/FDIS, future edition 3 of IEC 60862-1, prepared by IEC/TC 49 “Piezoelectric and dielectric devices for frequency control and selection“ was subm
12、itted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60862-1:2015. The following dates are fixed: latest date by which the document hasto be implemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2016-06-24 latest date by which the nationa
13、lstandards conflicting with thedocument have to be withdrawn(dow) 2018-09-24 This document supersedes EN 60862-1:2003. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifyin
14、g any or all such patent rights. Endorsement notice The text of the International Standard IEC 60862-1:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-
15、2-10:2005 NOTE Harmonized as EN 60068-2-10:2005 (not modified). IEC 60862-2:2012 NOTE Harmonized as EN 60862-2:2012 (not modified). IEC 60862-3 NOTE Harmonized as EN 60862-3. BS EN 60862-1:2015EN 60862-1:2015 3 Annex ZA (normative) Normative references to international publications with their corres
16、ponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including an
17、y amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publicatio
18、n Year Title EN/HD Year IEC 60027 series Letter symbols to be used in electrical technology EN 60027 series IEC 60050 series International electrotechnical vocabulary - - IEC 60068-1 2013 Environmental testing - Part 1: General and guidance EN 60068-1 2014 IEC 60068-2-1 - Environmental testing - Par
19、t 2-1: Tests - Test A: Cold EN 60068-2-1 - IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - Test B: Dry heat EN 60068-2-2 - IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 - IEC 60068-2-7 - Basic environmental testing procedures - Part
20、2-7: Tests - Test Ga and guidance: Acceleration, steady state EN 60068-2-7 - IEC 60068-2-13 - Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure EN 60068-2-13 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 -
21、 IEC 60068-2-17 1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing EN 60068-2-17 1994 IEC 60068-2-20 - Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads EN 60068-2-20 - IEC 60068-2-21
22、 - Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices EN 60068-2-21 - IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 - IEC 60068-2-30 - Environmental testing - Part 2-30: Tests - Test Db:
23、Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 - IEC 60068-2-31 - Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens EN 60068-2-31 - BS EN 60862-1:2015EN 60862-1:2015 4 IEC 60068-2-45 - Basic environmental testing procedures - Part
24、2-45: Tests - Test XA and guidance: Immersion in cleaning solvents EN 60068-2-45 - IEC 60068-2-52 - Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 - IEC 60068-2-58 - Environmental testing Part 2-58: Tests Test Td: Test methods for solde
25、rability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) - - IEC 60068-2-64 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance EN 60068-2-64 - IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - T
26、est Cab: Damp heat, steady state EN 60068-2-78 - IEC 60122-1 - Quartz crystal units of assessed quality - Part 1: Generic specification EN 60122-1 - IEC 60617 - Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection fo standard da
27、ta element types and component classes - - IEC 60642 - Piezoelectric ceramic resonators and resonator units for frequency control and selection - Chapter I: Standard values and conditions - Chapter II: Measuring and test conditions - - IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames -
28、Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 - IEC 60749-28 201X1)Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic Discharge (ESD) Sensitivity Testing Direct contact charged device model (DC-CDM) FprEN 60749-28 20
29、1X IEC 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 - IEC 61340-3-1 - Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge tes
30、t waveforms EN 61340-3-1 - IEC 61340-3-2 - Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms EN 61340-3-2 - IEC 80000 series Quantities and units EN 80000 series ISO 80000 series Quantities and units EN ISO 80000 se
31、ries 1)To be published.BS EN 60862-1:2015 2 IEC 60862-1:2015 IEC 2015 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, units and symbols 9 3.1 Terms and definitions 9 3.1.1 General terms 9 3.1.2 Response characteristics related terms . 12 3.1.3 SAW filter related terms
32、. 16 3.2 Units and symbols. 18 4 Order of precedence of documents 18 5 Preferred values for ratings and characteristics . 19 5.1 General . 19 5.2 Nominal frequencies . 19 5.2.1 Nominal frequency bands for use in RF applications 19 5.2.2 Nominal frequency bands for use in IF applications . 19 5.2.3 N
33、ominal frequency values for use in broadcasting IF applications 19 5.3 Relative attenuation values specifying pass bandwidth for IF applications . 20 5.4 TTE signal suppression . 20 5.5 Operating temperature ranges, in degrees Celsius (C) 20 5.6 Climatic category 20 5.7 Bump severity . 20 5.8 Vibrat
34、ion severity 21 5.9 Shock severity 21 5.10 Fine leak rate 21 6 Marking . 22 6.1 Filter marking 22 6.2 Package marking 22 7 Quality assessment procedures . 22 7.1 General . 22 7.2 Primary stage of manufacture . 22 7.3 Structurally similar components 22 7.4 Subcontracting 22 7.5 Incorporated component
35、s 23 7.6 Manufacturers approval 23 7.7 Approval procedures . 23 7.7.1 General . 23 7.7.2 Capability approval 23 7.7.3 Qualification approval 23 7.8 Procedures for capability approval 23 7.8.1 General . 23 7.8.2 Eligibility for capability approval . 24 7.8.3 Application for capability approval . 24 7
36、.8.4 Granting of capability approval 24 7.8.5 Capability manual 24 7.9 Procedures for qualification approval 24 BS EN 60862-1:2015IEC 60862-1:2015 IEC 2015 3 7.9.1 General . 24 7.9.2 Eligibility for qualification approval . 24 7.9.3 Application for qualification approval . 24 7.9.4 Granting of quali
37、fication approval 24 7.9.5 Quality conformance inspection . 24 7.10 Test procedures 24 7.11 Screening requirements 24 7.12 Rework and repair work 25 7.12.1 Rework 25 7.12.2 Repair work . 25 7.13 Certified records of released lots 25 7.14 Validity of release . 25 7.15 Release for delivery 25 7.16 Unc
38、hecked parameters . 25 8 Test and measurement procedures 25 8.1 General . 25 8.2 Test and measurement conditions . 25 8.2.1 Standard conditions for testing 25 8.2.2 Precision of measurement . 26 8.2.3 Precautions . 26 8.2.4 Alternative test methods 26 8.3 Visual inspection . 26 8.3.1 General . 26 8.
39、3.2 Visual test A 26 8.3.3 Visual test B 26 8.3.4 Visual test C 27 8.4 Dimensions and gauging procedures 27 8.4.1 Dimensions test A 27 8.4.2 Dimensions test B 27 8.5 Electrical test procedures 27 8.5.1 General . 27 8.5.2 Insertion attenuation measurement 27 8.5.3 Phase measurement 29 8.5.4 Group del
40、ay measurement . 29 8.5.5 Return attenuation measurement . 30 8.5.6 Unwanted signal measurement 32 8.5.7 Intermodulation distortion measurement 34 8.5.8 Measurement of insertion attenuation, phase, and group delay characteristics at specified terminating impedances and at standard atmospheric condit
41、ions 35 8.5.9 Measurement of insertion attenuation, phase, and group delay characteristics as a function of temperature . 35 8.5.10 Measurement of return attenuation at specified terminating impedance and at the standard atmospheric conditions . 35 8.5.11 Measurement of unwanted signals at standard
42、atmospheric conditions 35 8.5.12 Measurement of intermodulation distortion at standard atmospheric conditions 36 8.5.13 Measurement method for the balanced type filter . 36 8.5.14 Insulation resistance 38 BS EN 60862-1:2015 4 IEC 60862-1:2015 IEC 2015 8.5.15 Voltage proof . 38 8.6 Mechanical and env
43、ironmental test procedures . 38 8.6.1 Robustness of terminations (destructive) . 38 8.6.2 Sealing tests (non-destructive) 38 8.6.3 Soldering (solderability and resistance to soldering heat) (destructive) 39 8.6.4 Rapid change of temperature: severe shock by liquid immersion (non-destructive) 40 8.6.
44、5 Rapid change of temperature with prescribed time of transition (non-destructive) 40 8.6.6 Bump (destructive) 40 8.6.7 Vibration (destructive) 40 8.6.8 Shock (destructive) 41 8.6.9 Free fall (destructive) . 41 8.6.10 Acceleration, steady state (non-destructive) 41 8.6.11 Low air pressure (non-destr
45、uctive) . 42 8.6.12 Dry heat (non-destructive) . 42 8.6.13 Damp heat, cyclic (destructive) 42 8.6.14 Cold (non-destructive) . 42 8.6.15 Climatic sequence (destructive) . 42 8.6.16 Damp heat, steady state (destructive) 42 8.6.17 Salt mist cyclic (destructive) 42 8.6.18 Immersion in cleaning solvents
46、(non-destructive) . 43 8.6.19 Flammability test (destructive) . 43 8.6.20 Electrostatic discharge (ESD) sensitivity test (destructive) . 43 8.7 Endurance test procedure . 43 Bibliography 44 Figure 1 Frequency response of a SAW filter . 18 Figure 2 Insertion attenuation, phase, and group delay measur
47、ement 28 Figure 3 Return attenuation measurement . 31 Figure 4 Unwanted signal measurement 33 Figure 5 Unwanted signals measured on time domain 34 Figure 6 Intermodulation distortion measurement . 35 Figure 7 Four-port network analyzer measurement for balanced-balanced connection filter 37 Figure 8
48、Three-port network analyzer measurement for balanced-unbalanced connection filter 37 BS EN 60862-1:2015IEC 60862-1:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY Part 1: Generic specification FOREWORD 1) The International Electrote
49、chnical Commission (IEC) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, IEC publishes International Standards, Technical Specifications,Technical Reports, Publicly Available Specifications (PAS
