1、Electromagnetic compatibility of multimedia equipment Emission RequirementsBS EN 55032:2015Incorporating corrigendum June 2016(CISPR 32:2015)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 55032:20
2、15. It is identical to CISPR 32:2015, incorporating corrigendum June 2016.The UK participation in its preparation was entrusted by Technical Committee GEL/210, EMC - Policy committee, to Subcommittee GEL/210/11, EMC - Standards Committee.A list of organizations represented on this subcommittee can b
3、e obtainedThis publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 95099 5ICS 33.100.10Compliance with a British Standard can
4、not confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 55032:2015on request to its secretary.31 August 2016 I
5、mplementation of IEC corrigendum June 2016:Table B.1 correctedwhich will be withdrawn on May 2018. 5Together with BS EN 50561-1:2013, it supersedes BS EN 55032:2012, EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 55032July 2015 ICS 33.100.10 Supersedes EN 55032:2012 English Version Electromagneti
6、c compatibility of multimedia equipment - Emission Requirements (CISPR 32:2015) Compatibilit lectromagntique des quipements multimdia - Exigences dmission (CISPR 32:2015) Elektromagnetische Vertrglichkeit von Multimediagerten und -einrichtungen - Anforderungen an die Straussendung (CISPR 32:2015) Th
7、is European Standard was approved by CENELEC on 2015-05-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical re
8、ferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o
9、f a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former
10、Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical
11、Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 5
12、5032:2015 E EN 55032:2015 - 2 - Foreword The text of document CIS/I/498/FDIS, future edition 2 of CISPR 32, prepared by CISPR SC I “Electromagnetic compatibility of information technology equipment, multimedia equipment and receivers“ was submitted to the IEC-CENELEC parallel vote and approved by CE
13、NELEC as EN 55032:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-02-05 latest date by which the national standards conflicting with the document have to be wi
14、thdrawn (dow) 2018-05-05 This document supersedes EN 55032:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has bee
15、n prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For the relationship with EU Directive see informative Annex ZZ, which is an integral part of this document. Endorsement notice The tex
16、t of the International Standard CISPR 32:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: CISPR 13:2009 NOTE Harmonized as EN 55013:2013 (modified). CISPR 16 Seri
17、es NOTE Harmonized as EN 55016 Series. CISPR 22:2008 NOTE Harmonized as EN 55022:2010 (modified). BS EN 55032:2015- 3 - EN 55032:2015 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, a
18、re normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modi
19、fied by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year CISPR 16-1-1 +A1 +A2 2010 2010 2014 Specification for
20、radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus EN 55016-1-1 +A1 +A2 2010 2010 2014 CISPR 16-1-2 +A1 +A2 2003 2004 2006 Specification for radio disturbance and immunity measuring apparatus and methods
21、 - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances EN 55016-1-2 +A1 +A2 2004 1)2005 2006 CISPR 16-1-4 +A1 2010 2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity
22、measuring apparatus - Antennas and test sites for radiated disturbance measurements EN 55016-1-4 +A1 2010 2012 CISPR 16-2-1 +A1 +A2 2008 2010 2013 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conduc
23、ted disturbance measurements EN 55016-2-1 +A1 +A2 2009 2)2011 2013 CISPR 16-2-3 +A1 +A2 2010 2010 2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements EN 55016-2-3 +AC
24、 +A1 +A2 2010 2013 2010 2014 1)Superseded by EN 55016-1-2:2014 (CISPR 16-1-2:2014): DOW = 2017-04-25. 2)Superseded by EN 55016-2-1:2014 (CISPR 16-2-1:2014): DOW = 2017-04-02. BS EN 55032:2015EN 55032:2015 - 4 - Publication Year Title EN/HD Year CISPR 16-4-2 2011 Specification for radio disturbance a
25、nd immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty EN 55016-4-2 2011 IEC 61000-4-6 2008 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances
26、, induced by radio-frequency fields EN 61000-4-6 2009 3)ISO/IEC 17025 2005 General requirements for the competence of testing and calibration laboratories - - ANSI C63.5 2006 American National Standard (for) Electromagnetic Compatibility - Radiated Emission Measurements in Electromagnetic Interferen
27、ce (EMI) Control - Calibration of Antennas (9 kHz to 40 GHz) - - IEEE 802.3 - IEEE Standard for Information technology - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CMSA/CD) Access Method and Physical Layer Specifications - - 3)Superseded by EN 61000-4-6:2
28、014 (IEC 61000-4-6:2013): DOW = 2016-11-27. BS EN 55032:2015- 5 - EN 55032:2015 Annex ZZ (informative) Coverage of Essential Requirements of EU Directives This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and
29、within its scope the standard covers protection requirements Annex I, Article 1(a) of the EU Directive 2004/108/EC, and essential requirements of Article 3.1(b) (immunity only) of the EU Directive 1999/5/EC. Compliance with this standard provides presumption of conformity with the specified essentia
30、l requirements of the Directives concerned. WARNING Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 55032:2015 2 CISPR 32:2015 IEC 2015 CONTENTS FOREWORD . 8 1 Scope 10 2 Normative references 10 3 Terms, definitions and ab
31、breviations . 11 3.1 Terms and definitions 11 3.2 Abbreviations 16 4 Classification of equipment 17 5 Requirements 18 6 Measurements . 18 6.1 General . 18 6.2 Host systems and modular EUT 18 6.3 Measurement procedure . 19 7 Equipment documentation . 20 8 Applicability . 20 9 Test report . 21 10 Comp
32、liance with this publication 22 11 Measurement uncertainty 22 Annex A (normative) Requirements 23 A.1 General . 23 A.2 Requirements for radiated emissions 24 A.3 Requirements for conducted emissions . 28 Annex B (normative) Exercising the EUT during measurement and test signal specifications. 33 B.1
33、 General . 33 B.2 Exercising of EUT ports 33 B.2.1 Audio signals . 33 B.2.2 Video signals . 33 B.2.3 Digital broadcast signals 34 B.2.4 Other signals . 34 Annex C (normative) Measurement procedures, instrumentation and supporting information 38 C.1 General . 38 C.2 Instrumentation and supporting inf
34、ormation . 38 C.2.1 General . 38 C.2.2 Using CISPR 16 series as the basic standard 38 C.2.3 EUT cycle time and measurement dwell time . 41 C.3 General measurement procedures 41 C.3.1 Overview . 41 C.3.2 Prescan measurements . 43 C.3.3 Formal measurements . 43 C.3.4 Specifics for radiated emission me
35、asurements 43 C.3.5 Specifics for conducted emission measurements on the AC mains power ports . 43 C.3.6 Specifics for conducted emission measurements on analogue/digital data ports 43 BS EN 55032:2015CISPR 32:2015 IEC 2015 3 C.3.7 Specifics for conducted emission measurements on broadcast receiver
36、tuner ports . 44 C.3.8 Specifics for conducted emission measurements on RF modulator output ports . 44 C.4 MME-related measurement procedures . 44 C.4.1 Measurement of conducted emissions at analogue/digital data ports . 44 C.4.2 Measurement of emission voltages at a TV/FM broadcast receiver tuner p
37、orts in the frequency range 30 MHz to 2,15 GHz 50 C.4.3 Measurement of the wanted signal and emission voltage at RF modulator output ports, in the frequency range 30 MHz to 2,15 GHz 51 C.4.4 Additional Normalized Site Attenuation (NSA) values . 52 Annex D (normative) Arrangement of EUT, local AE and
38、 associated cabling 54 D.1 Overview. 54 D.1.1 General . 54 D.1.2 Table-top arrangement 58 D.1.3 Floor standing arrangement . 58 D.1.4 Combinations of table-top and floor standing EUT arrangement . 59 D.1.5 Arrangements for radiated measurement in a FAR . 59 D.2 MME-related conditions for conducted e
39、mission measurement 59 D.2.1 General . 59 D.2.2 Specific conditions for table-top equipment 60 D.2.3 Specific requirements for floor standing equipment 61 D.2.4 Specific requirements for combined table-top and floor standing equipment 61 D.3 MME-related requirements for radiated measurement . 61 D.3
40、.1 General . 61 D.3.2 Requirements for table-top equipment . 61 Annex E (informative) Prescan measurements . 72 Annex F (informative) Test report contents summary . 73 Annex G (informative) Support information for the measurement procedures defined in C.4.1.1 74 G.1 Schematic diagrams of examples of
41、 asymmetric artificial networks . 74 G.2 Rationale for emission measurements and procedures for wired network ports . 83 G.2.1 Limits 83 G.2.2 Combination of current probe and CVP 84 G.2.3 Basic ideas of the CVP 85 G.2.4 Combination of current and voltage limit 85 G.2.5 Ferrite requirements for use
42、in C.4.1.1 87 Annex H (normative) Supporting information for the measurement of outdoor unit of home satellite receiving systems . 90 H.1 Rationale 90 H.2 General . 90 H.3 Operation conditions . 91 H.4 Specific requirements for LO measurement . 91 H.5 EUT arrangements 92 Annex I (informative) Other
43、test methods and associated limits for radiated emissions 94 I.1 General . 94 I.2 Procedures for radiated emission measurements using a GTEM or RVC . 94 I.3 Additional measurement procedure information . 96 BS EN 55032:2015 4 CISPR 32:2015 IEC 2015 I.3.1 General . 96 I.3.2 Specific considerations fo
44、r radiated emission measurements using a GTEM 96 I.3.3 Specific considerations for radiated emission measurements using an RVC 96 I.4 Use of a GTEM for radiated emission measurements 97 I.4.1 General . 97 I.4.2 EUT layout 97 I.4.3 GTEM, measurements above 1 GHz 98 I.4.4 Uncertainties . 99 I.5 Specif
45、ic EUT arrangement requirements for radiated emission measurements above 1 GHz using an RVC . 99 I.6 Reference documents . 99 Bibliography 101 Figure 1 Examples of ports 15 Figure 2 Example of a host system with different types of modules 19 Figure A.1 Graphical representation of the limits for the
46、AC mains power port defined in Table A.10 23 Figure C.1 Measurement distance 39 Figure C.2 Boundary of EUT, Local AE and associated cabling 40 Figure C.3 Decision tree for using different detectors with quasi peak and average limits . 41 Figure C.4 Decision tree for using different detectors with pe
47、ak and average limits 42 Figure C.5 Decision tree for using different detectors with a quasi-peak limit 42 Figure C.6 Calibration fixture . 50 Figure C.7 Arrangement for measuring impedance in accordance with C.4.1.7 50 Figure C.8 Circuit arrangement for measurement of emission voltages at TV/FM bro
48、adcast receiver tuner ports 51 Figure C.9 Circuit arrangement for the measurement of the wanted signal and emission voltage at the RF modulator output port of an EUT . 52 Figure D.1 Example measurement arrangement for table-top EUT (conducted and radiated emission) (top view) 62 Figure D.2 Example m
49、easurement arrangement for table-top EUT (conducted emission measurement alternative 1) . 63 Figure D.3 Example measurement arrangement for table-top EUT (conducted emission measurement alternative 2) . 64 Figure D.4 Example measurement arrangement for table-top EUT measuring in accordance with C.4.1.6.4 . 64 Figure D.5 Example measurement arrangement for table-top EUT (conducted emission measurement alternative 2, showing AAN position) . 65 Figure D.6 Example measurement arrangement for fl
