1、BRITISH STANDARD BS EN 50090-8:2001 Home and Building Electronic Systems (HBES) Part 8: Conformity assessment of products The European Standard EN 50090-8:2000 has the status of a British Standard ICS 97.120 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 50090-8:2001 Thi
2、s British Standard, having been prepared under the direction of the DISC Board, was published under the authority of the Standards Committee and comes into effect on 15 May 2001 BSI 05-2001 ISBN 0 580 37323 1 National foreword This British Standard is the official English language version of EN 5009
3、0-8:2000. The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that
4、CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the
5、section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application
6、. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related intern
7、ational and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was la
8、st issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 50090-8 NORME EUROPENNE EUROPISCHE NORM October 2000 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Norm
9、ung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50090-8:2000 E ICS 97.120 English version Home and Building Electronic Systems (HBES) Part 8: Conformity assessmen
10、t of products Systmes lectroniques pour les foyers domestiques et les btiments (HBES) Partie 8: Evaluation de la conformit des produits Elektrische Systemtechnik fr Heim und Gebude (ESHG) Teil 8: Konformittsbeurteilung von Produkten This European Standard was approved by CENELEC on 2000-08-01. CENEL
11、EC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on ap
12、plication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secret
13、ariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United K
14、ingdom.Page 2 EN 50090-8:2000 Foreword This European Standard has been prepared by the Technical Committee CENELEC TC 205 ”Home and Building Electronic Systems“ (HBES) in close relation with ELSECOM. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC a
15、s EN 50090-8 on 2000-08-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2001-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn
16、 (dow) 2003-04-01 _ EN 50090-8 is part of the EN 50090 series of European Standards, which will comprise the following parts: Part 1: Standardization structure Part 2: System overview Part 3: Aspects of application Part 4: Transport layer and network layer Part 5: Media and media dependent layers Pa
17、rt 6: Interfaces Part 7: System management Part 8: Conformity assessment of products Part 9: Installation requirements Annexes designated “informative“ are given for information only. In this standard, annex A is informative.Page 3 EN 50090-8:2000 CONTENTS Foreword 2 Introduction 4 1 Scope . 4 2 Nor
18、mative references 4 3 Definitions . 4 4 Applicable standards. 5 4.1 General. 5 4.2 Protocols . 5 4.3 Electrical safety. 5 4.4 Electromagnetic compatibility (EMC) 5 4.5 Environment 5 4.6 Functional safety. 5 Annex A (informative) Bibliography. 6Page 4 EN 50090-8:2000 Introduction This document identi
19、fies the rules and standards that are particularly applicable to HBES functionalities in products in order to enable harmonisation of testing and conformity assessment. A product may comprise a single device or a combination of devices intended to be connected and supplied together. 1 Scope This sta
20、ndard is relevant for all electronic products and systems (including their software) having home and/or building control functions. It is not restricted to products complying with the HBES standards. Parts of devices and equipment not providing HBES functionality are not included. For such device pa
21、rts the relevant product standards apply. This standard defines the general conformity assessment requirements for the communication protocols. This standard indicates those standards to be used for conformity assessment of HBES products and or systems. The conformity assessment procedure provides r
22、equirements for all key elements of HBES, such as safety, including functional safety, EMC requirements and environment. These requirements are given by reference to relevant standards, where available. The assessment and testing of installed systems will be covered by EN 50090-9-2. 2 Normative refe
23、rences This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed below. For dated references subsequent amendments to or revisions of any of these pu
24、blications apply to this European Standard only when incorporated in it by amendment or revision of this European Standard. For undated references the latest edition of the publication referred to applies. EN 50065-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to
25、148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances EN 50090-2-2 Home and Building Electronic Systems (HBES) Part 2-2: System overview - General technical requirements EN 50090-9-2 1 Home and Building Electronic Systems (HBES) Part 9-2: Installation requirement
26、s - Inspection and testing of HBES installations 3 Definitions For the purpose of this standard, the following definitions apply: 3.1 home control system (hcs): home network together with all the devices attached to it, including the rules for control, communication and management among application
27、processes. Three classes of home control systems are defined 3.2 For other definitions, see also IEC Guide 110.1In preparation.Page 5 EN 50090-8:2000 4 Applicable standards 4.1 General This clause lists, when they exist, the applicable standards in the various areas identified as being relevant to H
28、BES products testing and conformity assessment. 4.2 Protocols Protocols shall be tested in accordance with the test specification of the manufacturer and/or organisations, at the choice of the manufacturer/organisations, if available. Standardised requirements for test specifications for protocols a
29、re under consideration. NOTE 1 There are no European standards covering this issue at the moment. A particular conformity assessment scheme may be imposed by the owner of a given protocol, for the use of this protocol. It is otherwise up to the manufacturer to decide whether the implementation of th
30、e protocol specification he has chosen should be the object of a second or third party certification, or none. NOTE 2 The protocols used are published as CENELEC Technical Reports R205-007 to R205-011 and as ENV 13154-2. 4.3 Electrical safety The requirements and tests as described in subclause 5.2
31、of EN 50090-2-2 shall be applied to the HBES products. 4.4 Electromagnetic compatibility (EMC) The series of requirements and tests as described in clause 7 of EN 50090-2-2 shall be applied to the HBES products and system elements. For products based on power line communication, EN 50065-1 shall be
32、applied in addition to EN 50090-2-2. 4.5 Environment The series of requirements and tests as described in clause 6 of EN 50090-2-2 shall be applied to the HBES products. 4.6 Functional safety The requirements and tests as described in subclause 5.3 of EN 50090-2-2 shall be applied to the HBES produc
33、ts. NOTE Further guidance is included in CENELEC Technical Report R205-012, which should be taken into consideration.Page 6 EN 50090-8:2000 Annex A (informative) Bibliography IEC Guide 110 Home control systems Guidelines relating to safety ISO/IEC Guide 2:1991 General Terms and their definitions con
34、cerning Standardization and related activities ISO/IEC 9646 (7 parts) Open Systems Interconnection Conformance Testing Methodology and Framework ENV 13154-2:1998 Data Communication for HVAC Application Field Net - Part 2: Protocols EN 45001 General criteria for the operation of testing laboratories
35、EN 45011 General criteria for certification bodies operating product certification ISO/IEC publication, 1992 Certification and Related activities - Assessment and verification of conformity to standards and technical specifications. EN ISO 9001 Quality systems. Model for quality assurance in design,
36、 development, production, installation and servicing. EN ISO 9002 Quality systems. Model for quality assurance in production, installation and servicing. EN ISO 9003 Quality systems. Model for quality assurance in final inspection and test. R205-007 Home and Building electronic systems (HBES) Techni
37、cal Report 7: Aspects of application Application Layer R205-008 Home and Building electronic systems (HBES) Technical Report 8: Transport Layer and Network Layer, Class 1 R205-009 Home and Building electronic systems (HBES) Technical Report 9: Media and media dependent layers, Network based on Twist
38、ed Pair, Class 1 R205-010 Home and Building electronic systems (HBES) Technical Report 10: Interfaces Medium Interface, Twisted Pair, Class 1 R205-011 Home and Building electronic systems (HBES) Technical Report 11: Management R205-012 Home and Building electronic systems (HBES) Technical Report 12:
39、 Guidelines on requirements for Functional Safety of products intended to be integrated in a home control system NOTE The CENELEC Technical Reports R205-007 to -011 describe application layer, transport and network layer, physical layer for twisted pair class 1, medium interfaces including mechanica
40、l, functional and electrical characteristics, management specifications of existing systems BatiBUS, EIB, EHSBS EN 50090-8:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the
41、 UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to imp
42、rove the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax:
43、 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 02
44、0 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information o
45、n standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Info
46、rmation Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax:
47、 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, De
48、signs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard
49、, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
