1、BRITISH STANDARDBS EN 14035-25:2005Fireworks Part 25: Party poppers Specification and test methodsThe European Standard EN 14035-25:2005 has the status of a British StandardICS 71.100.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g5
2、5g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14035-25:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 21 F
3、ebruary 2006 BSI 21 February 2006ISBN 0 580 46858 5National forewordThis British Standard is the official English language version of EN 14035-25:2005. It partially supersedes BS 7114-2:1988 and BS 7114-3:1988, which have been declared obsolescent.NOTE BS 7114-2:1988 and BS 7114-3:1988 are cited in
4、The Fireworks (Safety) Regulations 1997.The UK participation in its preparation was entrusted to Technical Committee CII/47, Fireworks, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Additional informationThe United
5、Kingdom, as a member of CEN, is obliged to publish EN 14035-25 as a British Standard. However, attention is drawn to the fact that the United Kingdom voted against the approval of EN 14035-25.The main reason for this disapproval is that BSI Committee CII/47 considers that Figure 4 in 8.3 is inaccura
6、te and misleading because various elements of the figure are too small. The BSI Committee recommends that if a transparent template is used to check type sizes on labelling, the template should be accurately produced so that the height of each character and symbol on the template is within +0.10mm o
7、f the relevant minimum height specified in this standard.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogueunder the section entitled “International Standards Correspondence Index”, or by using t
8、he “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from l
9、egal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summ
10、ary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 30, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsL
11、icensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14035-25November 2005ICS 71.100.30English VersionFireworks - Part 25: Party Poppers - Specification and testmethodsArtifices de divertissement - Partie 25: Party-Popp
12、ers -Spcifications et mthodes dessaiFeuerwerkskrper - Teil 25: Party-Knaller - Anforderungenund PrfverfahrenThis European Standard was approved by CEN on 12 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea
13、nStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, Fren
14、ch, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic
15、, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUR
16、OPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14035-25:2005: ELicensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c)
17、BSIEN 14035-25:2005 (E) 2Contents PageForeword 41 Scope .62 Normative references .73 Terms and definitions.74 Construction74.1 Shape .74.2 Materials of firework case 74.3 Integrity74.4 Length of pull-string .84.5 Ejected material 85 Performance 85.1 Pull-string 85.2 Principal effects 85.3 Number of
18、reports.85.4 Sound pressure level85.5 Burning matter 85.6 Projected material.85.7 Integrity of firework case after functioning.86 Primary pack .97 Minimum labelling requirements .97.1 General 97.2 Type name and category 97.3 Safety information.97.3.1 General 97.3.2 Party poppers97.4 Name, address an
19、d telephone number of manufacturer or distributor or importer 97.5 Reference to this standard.107.6 Printing 107.6.1 Labelling 107.6.2 Type size107.7 Marking of very small party poppers.107.7.1 Reduced size .107.7.2 Reduced information 107.8 Additional information on the primary pack .118 Test metho
20、ds.118.1 Length of pull-string (type test and batch test) 118.1.1 Apparatus 118.1.2 Procedure 118.2 Performance (type test and batch test) .118.2.1 Test environment 118.2.2 Material 118.2.3 Apparatus 118.2.4 Procedure 138.3 Labelling (type test and batch test) .14Annex A (normative) Type testing15An
21、nex B (normative) Batch testing 21Annex C (Normative) Specification for test paper.24Licensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14035-25:2005 (E) 3Annex D (normative) Method for determination of smouldering rate of cigarette27Annex E (informative) A-Devia
22、tions .28Bibliography.30Licensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14035-25:2005 (E) 4Foreword This European Standard (EN 14035-25:2005) has been prepared by Technical Committee CEN/TC 212 “Fireworks”, the secretariat of which is held by NEN. This Europea
23、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. This European Standard is one of a series of standards as listed belo
24、w. EN 14035-1, Fireworks - Part 1: Terminology. EN 14035-2, Fireworks - Part 2: Categorisation. EN 14035-3, Fireworks - Part 3: Aerial wheels - Specification and test methods. EN 14035-4, Fireworks - Part 4: Bangers and banger batteries - Specification and test methods. prEN 14035-5, Fireworks - Par
25、t 5: Batteries and combinations - Specification and test methods.EN 14035-6, Fireworks - Part 6: Bengal flames - Specification and test methods. EN 14035-7, Fireworks - Part 7: Bengal matches - Specification and test methods.EN 14035-8, Fireworks - Part 8: Bengal sticks - Specification and test meth
26、ods.EN 14035-9, Fireworks - Part 9: Crackling granules - Specification and test methods. EN 14035-10, Fireworks - Part 10: Double bangers - Specification and test methods.EN 14035-12, Fireworks - Part 12: Flash bangers and flash banger batteries - Specification and test methods. EN 14035-13, Firewor
27、ks - Part 13: Flash pellets - Specification and test methods. EN 14035-15, Fireworks - Part 15: Fountains - Specification and test methods. EN 14035-17, Fireworks - Part 17: Ground spinners - Specification and test methods. EN 14035-18, Fireworks - Part 18: Hand-held fountains - Specification and te
28、st methods. EN 14035-19, Fireworks - Part 19: Hand-held sparklers - Specification and test methods. EN 14035-20, Fireworks - Part 20: Jumping crackers - Specification and test methods. EN 14035-21, Fireworks - Part 21: Jumping ground spinners - Specification and test methods.EN 14035-22, Fireworks -
29、 Part 22: Mines - Specification and test methods. EN 14035-23, Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods. EN 14035-24, Fireworks - Part 24: Novelty matches - Specification and test methods. EN 14035-25, Fireworks - Part 25: Party poppers - Specification and test m
30、ethods.Licensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14035-25:2005 (E) 5EN 14035-27, Fireworks - Part 27: Rockets - Specification and test methods. EN 14035-28, Fireworks - Part 28: Roman candles - Specification and test methods. EN 14035-29, Fireworks - Par
31、t 29: Serpents - Specification and test methods. prEN 14035-31, Fireworks - Part 31: Shellin-mortars - Specification and test methods.prEN 14035-33, Fireworks - Part 33: Spinners - Specification and test methods.EN 14035-34, Fireworks - Part 34: Table bombs - Specification and test methods. EN 14035
32、-35, Fireworks - Part 35: Throwdowns - Specification and test methods. EN 14035-36, Fireworks - Part 36: Wheels - Specification and test methods. PrEN 14035-37, Fireworks - Part 37: Whistlers - Specification and test methods. prEN 14035-38, Fireworks - Part 38: Shot tubes - Specification and test me
33、thods. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat
34、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Licensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14035-25:2005 (E) 61 Scope This European Standard specifies requirements
35、 for the construction, performance, primary packaging and labelling of party poppers and the corresponding test methods. It is applicable to fireworks which are classified as party poppers in category 1 of EN 14035-2 and which are contained in a primary pack. It is applicable to party poppers which
36、contain up to 10 mg of pyrotechnic composition that is based on potassium chlorate and red phosphorous. It is not applicable to party poppers containing pyrotechnic composition that includes any of the following substances: arsenic or arsenic compounds; mixtures containing a mass fraction of chlorat
37、es greater than 80 %; mixtures of chlorates with metals; mixtures of chlorates with potassium hexacyanoferrate(II); mixtures of chlorates with sulfur; mixtures of chlorates with sulfides; lead or lead compounds; mercury compounds; white phosphorus; picrates or picric acid; potassium chlorate with a
38、mass fraction of bromates greater than 0,15 %; sulfur with an acidity, expressed in mass fraction of sulfuric acid, greater than 0,002 %; zirconium with a particle size of less than 40 m.NOTE In EN 14035-2, party poppers are classified as follows: - brief description: device operated by a pull-strin
39、g with an abrasive surface in sliding contact with a friction-sensitive pyrotechnic composition and designed to be held in the hand; - principal effects: report, with ejection of streamers and/or confetti. Schemes for type testing of party poppers and batch testing of party poppers are specified in
40、annex A and annex B respectively. Licensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14035-25:2005 (E) 72 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the editi
41、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14035-1:2003, Fireworks Part 1: Terminology.EN 14035-2, Fireworks Part 2: Categorisation.EN 20187, Paper, board and pulps - Standard atmosphere for conditioning and testing
42、and procedure for monitoring the atmosphere and conditioning of samples. (ISO 187:1990). EN 61672-1, Electroacoustics - Sound level meters - Part 1: Specifications (IEC 61672-1:2002).EN ISO 536, Paper and board - Determination of grammage. (ISO 536:1995). EN ISO 845, Cellular plastics and rubbers De
43、termination of apparent (bulk) density. (ISO 845:1988) EN ISO 868, Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003). EN ISO 2439, Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:19
44、97, including Technical Corrigendum 1:1998). ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given
45、in EN 14035-1:2003 apply. 4 Construction 4.1 Shape The shape of the party popper shall be such that it does not resemble a gun. Conformity to this requirement shall be verified by visual examination. 4.2 Materials of firework case The body of the firework case shall be made of paper, cardboard or pl
46、astics.Conformity to this requirement shall be verified by visual examination. 4.3 Integrity There shall be no splits, dents or bulges in the body of the firework case and no holes other than that through which the pull-string passes. There shall be no holes or splits in the closure of the mouth whi
47、ch shall be in place so that it retains the contents. Conformity to these requirements shall be verified by visual examination. Licensed Copy: Wang Bin, na, Tue May 09 02:43:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14035-25:2005 (E) 84.4 Length of pull-string When measured in accordance with 8.1, t
48、he length of the pull-string shall be at least 75 mm. 4.5 Ejected material When examined in accordance with 8.2, the ejected material shall be made of paper. 5 Performance 5.1 Pull-string When tested in accordance with 8.2, the pull-string shall not break. 5.2 Principal effects When tested in accord
49、ance with 8.2, the principal effects of the party popper, as given in EN 14035-2, shall be a report with the ejection of streamers and/or confetti. 5.3 Number of reports When tested in accordance with 8.2, the party popper shall not produce more than one report. 5.4 Sound pressure level When tested in accordance with 8.2, a party popper shall produce a maximum A-weighted impulse sound pressure level (LAImax) of not higher than 120 dB (AI) at a horizontal distance of 500 mm behind the party popper. When tested in accordance with 8.2, a pa
