1、BSI Standards PublicationBS EN 12828:2012Heating systems in buildings Design for water-based heatingsystemsCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 12828:2012Nationa
2、l forewordThis British Standard is the UK implementation of EN 12828:2012. It supersedes BS EN 12828:2003 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee RHE/24, Central heating installations.Guidance to support the use of BS EN 12828:2012 in the UK is
3、 given in National Annex NA (informative).A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standard
4、s Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 74152 4 ICS 91.140.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2013.
5、Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM
6、EN 12828 November 2012 ICS 91.140.10 English Version Heating systems in buildings - Design for water-based heating systems Systmes de chauffage dans les btiments - Conception des systmes de chauffage eau Heizungsanlagen in Gebuden - Planung von Warmwasser-Heizungsanlagen This European Standard was a
7、pproved by CEN on 6 October 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such natio
8、nal standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own langua
9、ge and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
10、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Mana
11、gement Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12828:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction
12、 or networking permitted without license from IHS-,-,-2 BS EN 12828:2012 EN 12828:2012 (E)Foreword This document (EN 12828:2012) has been prepared by Technical Committee CEN/TC 228 “Heating systems in buildings”, the secretariat of which is held by DIN. This European Standard shall be given the stat
13、us of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of
14、patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12828:2003. The main changes compared to the previous edition EN 12828:2003 are: restrictions concerning additional safety requirements for systems larger than 1
15、 MW were removed; an informative annex for safety valves was added; definitions were corrected and added; the guidance for dimensioning of diaphragm expansion vessels (sealed systems) in Annex D was revised, and a figure describing the different pressure level was added; a specification for the wate
16、r used has been added in 4.3.2.1; the requirements concerning safety arrangements (4.6) were revised and clarified; 4.7.4 concerning pressure maintaining control device was revised. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are
17、 bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por
18、tugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3 BS EN 12828:2012 EN 12828:2012 (E
19、)Contents Page Introduction .51 Scope 62 Normative references 63 Terms, definitions and symbols .73.1 Terms and definitions .73.2 Symbols . 104 System design requirements . 134.1 Requirements for preliminary design information 134.2 Heat supply 144.2.1 General . 144.2.2 Sizing . 144.3 Heat distribut
20、ion . 154.3.1 General . 154.3.2 Design criteria . 154.4 Heat emission 174.4.1 General . 174.4.2 Sizing . 174.4.3 Positioning 174.4.4 Thermal environment . 184.4.5 Surface temperatures . 184.5 Controls . 184.5.1 General . 184.5.2 Classification . 184.5.3 Central control 194.5.4 Zone control 194.5.5 L
21、ocal control . 194.5.6 Timing control . 204.6 Safety arrangements 204.6.1 General . 204.6.2 Equipment required for sealed systems 214.6.3 Equipment required for open vented systems 234.7 Operational requirements 244.7.1 General . 244.7.2 Provision for monitoring operating conditions . 254.7.3 Temper
22、ature controller 254.7.4 Pressure maintaining control device 254.7.5 Water level adjustment . 254.8 Thermal insulation 254.8.1 General . 254.8.2 Undesirable heat losses . 264.8.3 Harmful effects of too high temperatures 274.8.4 Frost protection 275 Instructions for operation, maintenance and use . 2
23、76 Installation and commissioning 27Annex A (informative) Control system classification . 28A.1 Control system classification 28A.1.1 General . 28A.1.2 Heating control system modes . 28Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproductio
24、n or networking permitted without license from IHS-,-,-4 BS EN 12828:2012 EN 12828:2012 (E)A.1.3 Control system performance modes . 28A.1.4 Control system classification table . 28A.2 Examples of control system classification . 29A.2.1 Local manual control 29A.2.2 Local manual control and central au
25、tomatic control . 30A.2.3 Local automatic control and central automatic control 31A.2.4 Local automatic control and automatic zone control 32A.2.5 Local automatic control and central automatic control with optimisation . 33Annex B (informative) Thermal Environment . 34Annex C (informative) Thermal i
26、nsulation 36Annex D (informative) Guidance for dimensioning diaphragm expansion vessels and pressurisation systems (sealed systems) 39D.1 General . 39D.2 Expansion vessel size calculation . 40Annex E (informative) Safety valves for heating systems 43E.1 Classification . 43E.2 General requirements .
27、43E.2.1 General . 43E.2.2 Materials . 43E.2.3 Protection against maladjustments . 43E.2.4 Guidance of the moveable parts 43E.2.5 Easing gear 43E.2.6 Protection of sliding and rotating elements . 44E.2.7 Design of coil compression springs . 44E.2.8 Transport protections . 44E.2.9 Pipes, installation
28、and body . 44E.2.10 Marking . 44E.3 Calculation of the relief capacity . 46E.4 Requirements for safety valves marked H 46E.4.1 General . 46E.4.2 Body and spring cap design 46E.4.3 Threads on the inlet and outlet 47E.4.4 Connections . 47E.4.5 Calculation . 47E.4.6 Setting. 47E.5 Requirements for safe
29、ty valves marked D/G/H 47E.5.1 General . 47E.5.2 Body and spring cap design 48E.5.3 Design of the valve disc 48E.5.4 Protection of sliding and rotating elements as well as springs . 48E.5.5 Safety valve with back pressure compensation 48E.5.6 Setting. 48Annex F (informative) Adeviations 52Bibliograp
30、hy 53Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5 Introduction The subjects covered by CEN/TC 228 are the following: design of heating systems (water based, electrical, etc.
31、); installation of heating systems; commissioning of heating systems; instructions for operation, maintenance and use of heating systems; methods for calculation of the design heat loss and heat load; methods for calculation of the energy performance of heating systems. Heating systems also include
32、the effect of attached systems such as hot water production systems. All these standards are system standards, i.e. they are based on requirements addressed to the system as a whole and not dealing with requirements to the products within the system. Where possible, reference is made to other CEN or
33、 ISO standards, e.g. product standards. However, use of products complying with relevant product standards is no guarantee of compliance with the system requirements. The requirements are mainly expressed as functional requirements, i.e. requirements dealing with the function of the system and not s
34、pecifying shape, material, dimensions or the like. The guidelines describe ways to meet the requirements, but other ways to fulfil the functional requirements may be used if fulfilment can be proved. Heating systems differ among the member countries due to climate, traditions and national regulation
35、s. In some cases, requirements are given as classes so national or individual needs may be accommodated. In cases where the standards contradict with national regulations, the latter should be followed. BS EN 12828:2012 EN 12828:2012 (E)Copyright European Committee for Standardization Provided by IH
36、S under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-6 1 Scope This European Standard specifies design criteria for water based heating systems in buildings with a maximum operating temperature of up to 105 C. In case of heating systems with maxi
37、mum operating temperatures over 105 C other safety aspects than those described in 4.6 may apply. The other clauses of this European Standard are still valid for those systems. This European Standard does not amend product standards or product installation requirements. This standard covers the desi
38、gn of: heat supply systems; heat distribution systems; heat emission systems; control systems. This European Standard takes into account heating requirements of attached systems (e.g. domestic hot water, process heat, air conditioning, ventilation) in the design of a heat supply, but does not cover
39、the design of these systems. This European Standard does not cover requirements for installation or commissioning or instructions for operation, maintenance and use of water based heating systems. This European Standard does not cover the design of fuel and energy supply systems. 2 Normative referen
40、ces The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN
41、215, Thermostatic radiator valves Requirements and test methods EN 442-1, Radiators and convectors Part 1: Technical specifications and requirements EN 442-2, Radiators and convectors Part 2: Test methods and rating EN 442-3, Radiators and convectors Part 3: Evaluation of conformity EN 806-2, Specif
42、ications for installations inside buildings conveying water for human consumption Part 2: Design EN 1264-1, Water based surface embedded heating and cooling systems Part 1: Definitions and symbols EN 1264-2, Water based surface embedded heating and cooling systems Part 2: Floor heating: Prove method
43、s for the determination of the thermal output using calculation and test methods EN 1264-3, Water based surface embedded heating and cooling systems Part 3: Dimensioning EN 1264-4, Water based surface embedded heating and cooling systems Part 4: Installation EN 1264-5, Water based surface embedded h
44、eating and cooling systems Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls Determination of the thermal output BS EN 12828:2012 EN 12828:2012 (E)Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or network
45、ing permitted without license from IHS-,-,-7 EN 12170, Heating systems in buildings Procedure for the preparation of documents for operation, maintenance and use Heating systems requiring a trained operator EN 12171, Heating systems in buildings Procedure for the preparation of documents for operati
46、on, maintenance and use Heating systems not requiring a trained operator EN 12831, Heating systems in buildings Method for calculation of the design heat load EN 14336, Heating systems in buildings Installation and commissioning of water based heating systems EN 15500, Control for heating, ventilati
47、ng and air-conditioning applications Electronic individual zone control equipment EN 60730-2-9, Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls (IEC 730-2-9, modified) EN ISO 7730, Ergonomics of the thermal environment An
48、alytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730) EN ISO 13732-1, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1) 3 Terms, definitions and symbols For the purposes of this document, the fol
