1、BSI Standards PublicationBS EN 4644-014:2015Aerospace series Connector,electrical and optical,r e c t a n g u l a r , m o d u l a r ,r e c t a n g u l a r i n s e r t s , o p e r a t i n gtemperature 175 C (or 125 C)continuousPart 014: Receptacle, size 1, with groundblock, class B and F Product stan
2、dardBS EN 4644-014:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4644-014:2015.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on
3、 this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 89854 9ICS
4、 49.060; 49.090Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 464
5、4-014:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4644-014 November 2015 ICS 49.060; 49.090 English Version Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous - Part 014: Receptacle, size 1,
6、with ground block, class B and F - Product standard Srie arospatiale - Connecteur, lectrique et optique, rectangulaire, modulaire, inserts rectangulaires, temprature de fonctionnement 175 C (ou 125 C) continu - Partie 014 : Embase, taille 1, avec bloc de masse, classes B et F - Norme de produit Luft
7、- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinstze, Dauerbetriebstemperatur 175 C (oder 125 C) konstant - Teil 014: Fester Steckverbinder, Gre 1, mit Erdungseinrichtung, Klassen B und F - Produktnorm This European Standard was approved by CEN on 30
8、 June 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be o
9、btained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the
10、 CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel
11、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Cent
12、re: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4644-014:2015 EBS EN 4644-014:2015EN 4644-014:2015 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Terms and de
13、finitions . 4 4 Required characteristics 5 5 Designation . 8 BS EN 4644-014:2015EN 4644-014:2015 (E) 3 European foreword This document (EN 4644-014:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried ou
14、t in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publ
15、ication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall n
16、ot be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark
17、, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4644-014:20
18、15EN 4644-014:2015 (E) 4 1 Scope This European Standard specifies the size 1 receptacle with ground block for disconnect applications used in the family of modular rectangular electrical and optical connector with rectangular inserts. The plug corresponding to this receptacle is defined in EN 4644-0
19、11 and EN 4644-013. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document
20、(including any amendments) applies. EN 4644-001, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 001: Technical specification EN 4644-002, Aerospace series Connector, electrical and optical, rectangu
21、lar, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 002: Specification of performance and contact arrangements EN 4644-011, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) contin
22、uous Part 011: Plug, size 1, class A, C and E Product standard EN 4644-013, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 013: Plug, size 1, with ground block, class B and F Product standard 3 Term
23、s and definitions For the purposes of this standard, the terms and definitions given in EN 4644-001 apply. BS EN 4644-014:2015EN 4644-014:2015 (E) 5 4 Required characteristics 4.1 Dimensions and recommended panel cut-out See Figure 1 to Figure 3. Key 1 Polarization device (see EN 4644-001) 2 Two sel
24、f-locking 4-40 UNC threads for accessories 3 23,95 axis 4 Two self-locking 6-32 UNC threads NOTE Ar, Br, Cr axis, see EN 4644-001. Figure 1 BS EN 4644-014:2015EN 4644-014:2015 (E) 6 NOTE Ar axis, see EN 4644-001. Figure 2 BS EN 4644-014:2015EN 4644-014:2015 (E) 7 Key 1 2 places 2 4 places Figure 3 P
25、anel cut-out 4.2 Mass 55 g max. BS EN 4644-014:2015EN 4644-014:2015 (E) 8 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR, SIZE 1 RECEPTACLE Identity block EN 4644-014BMX Number of this standard Shell class (see EN 4644-002) Housing type: (see Figures 1 and 2) M: with two self-locking 6
26、-32 UNC threads Polarization code (see EN 4644-002) This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardizati
27、on products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standard
28、s -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide
29、 you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted Eur
30、opean and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription servic
31、es are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed
32、 daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Me
33、mbers. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your
34、 intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continua
35、lly improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI
36、 publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyri
37、ght, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
