1、BRITISH STANDARD BSCECC 00111-0:1994 Rule of Procedure 11 Specifications Part0:An introduction to the types ofspecifications applicable within theCECC systemBSCECC00111-0:1994 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, was published underthe
2、authority of the Standards Board and comes intoeffect on 15December 1994 BSI01-2000 The following BSI references relate to the work on this standard: Committee reference ECL/- Special announcement in BSINews, September 1994 ISBN0580235084 Committees responsible for this British Standard The preparat
3、ion of this British Standard was entrusted by the Electrotechnical Sector Board to Technical Committee (ECL/-) upon which the following bodies were represented: British Standards Society British Telecommunications plc Federation of the Electronics Industry (FEI) Ministry of Defence National Supervis
4、ing Inspectorate (BSIQA) Society of British Aerospace Companies Limited Amendments issued since publication Amd. No. Date CommentsBSCECC00111-0:1994 BSI 01-2000 i Contents Page Committees responsible Inside front cover National foreword ii Text of CECC00111-0 1 List of references Inside back coverBS
5、CECC00111-0:1994 ii BSI 01-2000 National foreword This British Standard has been prepared under the direction of the Electrotechnical Sector Board. It is identical with CECC00111-0 Rule of Procedure11, Specifications, Part0:An introduction to the types of specifications applicable within the CECC sy
6、stem, 1st edition, published by the European Committee for Electrotechnical Standardization (CENELEC) Electronic Components Committee (CECC). This standard describes the types of specifications applicable under the CECCsystem as detailed in the requirements given in the other Parts of BSCECC00111. T
7、he British Standard which implements the CECC Rules of Procedure is BS9000General requirements for a system for electronic components of assessed quality Part2:1991 Specification for the national implementation of the CECCsystem. Cross-references International Standard Corresponding British Standard
8、 CECC00111-I:1994 BSCECC00111 Rule of Procedure 11. Specifications Part1:1994General regulations for CECCSpecifications (Identical) CECC00111-II:1991 BSCECC00111 Rule of Procedure 11. Specifications Part2:1991Regulations for CECCSpecifications for components of enhanced assessment of quality (Identi
9、cal) CECC00111-III:1991 BSCECC00111 Rule of Procedure 11. Specifications Part3:1991Regulations for CECC Specifications for components for general and professional (civil and military) usage (excluding detail specifications) (Identical) CECC00111-IV:1991 BSCECC00111 Rule of Procedure 11. Specificatio
10、ns Part4:1991Regulations for CECCdetail specifications (Identical) CECC00111-V:1991 BSCECC00111 Rule of Procedure 11. Specifications Part5:1991Preparation of specifications under the Single Originator Procedure (Identical) CECC00111-VI:1994 BSCECC00111 Rule of Procedure 11. Specifications Part6:1994
11、Regulations for Process Assessement Schedules (PAS) (Identical) CECC00111-VII:1994 BSCECC00111 Rule of Procedure 11. Specifications Part7:1994Regulations for component specifications and assessement specifications (Identical) CECC00111-VIII:1994 BSCECC00111 Rule of Procedure 11. Specifications Part8
12、:1994Regulations for Technology Approval Schedules (TAS) (Identical) CECC200000:1993 BSCECC200000:1993 Harmonized system of quality assessment for electronic components. Requirements for process assessment schedules for process approval (Identical)BSCECC00111-0:1994 BSI 01-2000 iii The technical com
13、mittee has reviewed the provisions of CECC00200 and CECC00400 to which reference is made in the text and has decided that they areacceptable for use in conjunction with this standard 1) . CECC210000 has not yet been published. When it has been published it is intended to adopt it as an identical Bri
14、tishStandard. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This docum
15、ent comprises a front cover, an inside front cover, pages i to iv, theCECCtitle page, pageii, pages1 to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside
16、front cover. 1) It is not intended that CECC 00200 and CECC 00400 will be adopted as British Standards.iv blankCECC00111-0:1993 ii BSI 01-2000 Contents Page Introduction 1 1 Specifications relevant to qualification approval 3 1.1 Higher order documents 3 1.2 Framework for detail specifications 3 1.3
17、 Detail specifications 4 1.4 Component specifications 4 1.5 Assessment specifications 4 2 Specifications relevant to capability approval 5 2.1 Higher order documents 5 2.2 Detail specifications 5 2.3 Customer detail specifications 6 3 Specifications relevant to process approval 6 3.1 Process approva
18、l schedules 6 4 Specifications relevant to technology approval 7 4.1 Technology approval schedules 7 5 Summary 7 Figure1 8CECC 00111-0:1993 BSI 01-2000 1CECC 00111-0:1993 2 BSI 01-2000CECC 00111-0:1993 BSI 01-2000 3CECC 00111-0:1993 4 BSI 01-2000CECC 00111-0:1993 BSI 01-2000 5CECC 00111-0:1993 6 BSI
19、 01-2000CECC 00111-0:1993 BSI 01-2000 7 Figure 1 (voir page 8) Figure 1 (see page 8) Bild 1 (siehe Seite 8)CECC00111-0:1993 8 BSI 01-2000 Figure 1 BSCECC00111-0:1994 BSI 01-2000 List of references See national foreword.BSCECC 00111-0:1994 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsI
20、nstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards s
21、hould make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical commi
22、ttee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI,
23、international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise re
24、quested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and serv
25、ices. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:0208
26、9967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a re
27、trieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designa
28、tions. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
