1、BRITISH STANDARD BS4361-19: 1989 ISO7959:1987 Woodworking machines Part19: Specification for double edging precision circular sawing machines UDC 674.053:621.934:62113.2BS4361-19:1989 This BritishStandard, having been prepared under the directionof the Machine, Engineers and Hand Tool Standards Poli
2、cy Committee waspublished under the authorityof the Board of BSIandcomes into effect on 31October1989 BSI12-1999 The following BSI references relate to the work on this standard: Committee reference MTE/23 Draft for comment 85/79541 DC ISBN 0 580 17921 4 Committees responsible for this BritishStanda
3、rd The preparation of this BritishStandard was entrusted by the Machine, Engineers and Hand Tool Standards Policy Committee (MTE/-) to Technical Committee MTE/23 upon which the following bodies were represented: Advanced Manufacturing Technology Research Institute British Furniture Manufacturers Fed
4、eration British Railways Board British Woodworking Federation Department of the Environment, Building Research Establishment (PrincesRisborough Laboratory) Department of Trade and Industry, Mechanical Engineering and Manufacturing Technology Division (Mmt) Federation of British Hand Tool Manufacture
5、rs Furniture Industry Research Association Furniture, Timber and Allied Trades Union Health and Safety Executive Institute of Machine Wood Working Technology Ltd. National Sawmilling Association Saw Association Timber Research and Development Association Union of Construction, Allied Trades and Tech
6、nicians Woodworking Machinery Suppliers Association Ltd. Amendments issued since publication Amd. No. Date of issue CommentsBS4361-19:1989 BSI 12-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Reference 1 3 Preliminary remarks
7、 1 4 Nomenclature 2 5 Acceptance conditions and permissible deviations 4 Annex Equivalent terms 9 Publication referred to Inside back coverBS4361-19:1989 ii BSI 12-1999 National foreword This Part of BS4361 has been prepared under the direction of the Machine, Engineers and Hand Tools Standards Poli
8、cy Committee and implements agreements of the International Organization for Standardization (ISO). It is identical with ISO7959:1987 “Woodworking machines Double edging precision circular sawing machines Nomenclature and acceptance conditions”. Diagrams. For reasons of simplicity the diagrams in th
9、is standard illustrate only one type of machine. In clauses1 and2 reference is made to ISO7984 for information only. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a
10、British Standard does not of itself confer immunity from legal obligations. Cross-reference International Standard Corresponding BritishStandard ISO230-1:1986 BS3800:1964 Methods for testing the accuracy of machine tools (Technically equivalent) Summary of pages This document comprises a front cover
11、, an inside front cover, pagesi andii, pages1 to10, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS4361-19:1989 BSI 12-1999 1 1 Scope and fi
12、eld of application This International Standard specifies the nomenclature appropriate to each part of the machine and, with reference to ISO230-1, the geometrical and practical tests for double edging precision circular sawing machines, and gives the corresponding permissible deviations which apply
13、to machines of general purpose use and normal accuracy. NOTEIn addition to terms used in the three official ISO languages (English, French and Russian), this International Standard gives the equivalent terms in the German, Spanish, Italian and Swedish languages in an annex; these have been included
14、at the request of Technical Committee ISO/TC39 and are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (IRANOR), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms. This International Standard de
15、als only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of the components, etc.), nor to its characteristics (speeds, feeds, etc.) which should generally be checked before the accura
16、cy is tested. This International Standard applies to those machines designated by the number12.132.34 in ISO7984. The annex does not form an integral part of this International Standard. 2 References ISO230-1, Acceptance code for machine tools Part1: Geometric accuracy of machines operating under no
17、-load or finishing conditions. ISO7984, Woodworking machines Technical classification of woodworking machines and auxiliary machines for woodworking. 3 Preliminary remarks 3.1 In this International Standard all dimensions and permissible deviations are expressed in millimetres. 3.2 To apply this Int
18、ernational Standard, reference should be made to ISO230-1, especially for installation of the machine before testing, the warming up of the main spindle and other moving parts, and the description of the measuring methods. The measuring instruments shall not permit measurement errors over1/3 of the
19、checked tolerances. 3.3 The sequence in which the geometrical tests are given is related to the sub-assemblies of the machine, and this in no way defines the practical order of testing. In order to make mounting of instruments and gauging easier, tests may be applied in any order. 3.4 When inspectin
20、g a machine, it is not always possible or necessary to carry out all the tests given in this International Standard. 3.5 It is up to the user to choose, in agreement with the manufacturer, those tests relating to the properties which are of interest to him, but these tests shall be clearly stated wh
21、en ordering a machine. 3.6 A movement is longitudinal when it takes place in the working direction of the piece. 3.7 When establishing the tolerance for a measuring range different from that given in this International Standard (see subclause2.311 in ISO230-1), it should be taken into consideration
22、that the minimum value of the tolerance is0,01mm.BS4361-19:1989 2 BSI 12-1999 4 NomenclatureBS4361-19:1989 BSI 12-1999 3BS 4361-19:1989 4 BSI 12-1999 5 Acceptance conditions and permissible deviations 5.1 Geometrical tests No. Diagram Object Permissible deviation Measuring instruments Observations a
23、nd references to the ISO230-1 acceptance code G1 Checking of straightness of the chain ways 0,05 Straightedge and feeler gauges Subclause5.212.1 Left chain way. Right chain way. G2 Checking of parallelism of the chain ways 0,1 for the length A Slide gauge subclause5.412.2BS 4361-19:1989 BSI 12-1999
24、5 No. Diagram Object Permissible deviation Measuring instruments Observations and references to the ISO230-1 acceptance code G3 Measurement of run-out of spindle a) near the end of the spindle b) near the spindle nose a)0,03 b)0,02 Measuring plate with parallel faces and dial gauge Subclause5.612.2
25、G4 Measurement of camming of saw flange 0,02 Measuring plate with parallel faces and dial gauge Subclause5.632BS 4361-19:1989 6 BSI 12-1999 No. Diagram Object Permissible deviation Measuring instruments Observations and references to the ISO230-1 acceptance code G5 Checking of squareness of the spin
26、dle to the chain ways 0,1/1000 Dial gauge and special test device Subclause5.512.1 G6 Checking of parallelism of the spindle to the chain ways 0,3 for a measuring length of1000 Measuring plate with parallel faces and level Subclause5.412.32BS 4361-19:1989 BSI 12-1999 7 No. Diagram Object Permissible
27、 deviation Measuring instruments Observations and references to the ISO230-1 acceptance code G7 Checking of straightness of the fence 0,1 Straightedge and feeler gauges Subclause5.212.1 G8 Checking of parallelism of the fence to the chain ways B 1and B 2 0,1 for a measuring length of1000 Straightedg
28、e and slide gauge Subclause5.412.2 G9 Checking of parallelism of the pressure rollers to the upper plane of the chain 0,2 Measuring plate with parallel faces and feeler gauges Subclause5.412.4 Control at each roller.BS 4361-19:1989 8 BSI 12-1999 No. Diagram Nature of test and execution conditions Pe
29、rmissible deviation Measuring instruments Observations and references to the ISO230-1 acceptance code P1 Checking of straightness of saw cuts for a feed rate of10m/min Two test pieces, with one side sawn 2000 250 25 of good texture: rough side edged with a saw blade in central position 0,1 Feeler ga
30、uges Subclauses4.1 and4.2 Rotate the test piece by180 and repeat the test. (No load defects.) P2 Checking of parallelism of the saw cuts for a feed rate of10m/min Test piece width,10 0,2 Slide gauge Subclauses4.1 and4.2BS 4361-19:1989 BSI 12-1999 9 Annex Equivalent terms (This annex does not form an
31、 integral part of the standard.) Reference German Spanish Italian Swedish Mehr-und Vielblattleistenkreis-sgemaschinen Sierras circulares multiples Sega circolare multilame per listelli Klyvsgar 1 1.1 1.2 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 3 3.1 3.2 3.3 3.4 3.5 4 4.1 4.2 5 5.1 5.2 5.3 5.4 Stnder Hauptstnd
32、er Nebenstnder Vorschub von Werkstck und/oder Werkzeug Vorschubmotor Getriebe Kettenantrieb Kettenantriebswelle Kettenumlenkwelle Transportkette Kettenglied Werkstckauflage, -halterung und-fhrung Anschlagwelle Fhrungsstck Seitenanschlag Aufgabetisch Druckwalze Werkzeugtrger und Werkzeuge Sgeblatt Zw
33、ischenring Einbauteile und Teile fr den Werkzeugantrieb Sgenantriebsmotor Keilriemen Sgewellenlager Sgewelle Armazn Bastidor principal Bastidor auxiliar Desplazamiento de las piezas y/o de las herramientas Motor de avance Caja de velocidades Pin de transmisin de la cadena Eje de transmisin de la ban
34、da cadena Polea de reenvio de la banda cadena Banda cadena Malla de la cadena Soporte, sujecin y guiado de las piezas Eje porta-gua Fijacin de la gua Gua Mesa de entrada Rodillo presor Porta-herramientas y herramientas Disco de sierra Anillo distanciador Unidad de trabajo y su transmisin Motor de la
35、 sierra Correas Palier del eje de la sierra Eje de la sierra Intelaiatura Basamento Basamento ausiliario Spostamento dei pezzi e/o degli utensili Motore di avanzamento Scatola ingranaggi Pignone di avanzamento della catena Albero di avanzamento della catena Puleggia folle di avanzamento della catena
36、 Catena di avanzamento Maglia della catena di avanzamento Supporto, fissaggio e guida dei pezzi Asta portaguida Supporto della guida Guida Tavola di alimentazione Rulli di pressione Portautensili ed utensili Lama della sega Distanziatore Unit operatrice e suo azionamento Motore della sega Guida a V
37、delle cinghie Supporto dellalbero della sega Albero della sega Stativkonstruktion Huvudstativ Stativverdel Matning av arbetsstycke och/eller verktyg Matningsmotor Matnings-vxellada Drev fr matarmatta Drivhjul matarmatta Brythjul matarmatta Matarmatta Lnk till matarmatta Upplag, hllare och styrning f
38、r arbetsstycke Glidstng fr anhll Fste fr anhll Anhll Inmatningsbord Tryckvals Verktygshllare och verktyg Sgblad Distansring Bearbetningsenheter och drivsystem Sgmotor Kilrem Spindellagring SgspindelBS 4361-19:1989 10 BSI 12-1999 Reference German Spanish Italian Swedish Mehr- und Vielblattleistenkrei
39、s- sgemaschinen Sierras circulares multiples Sega circolare multilame per listelli Klyvsgar 6 6.1 6.2 6.3 6.4 6.5 7 7.1 7.2 7.3 7.4 8 8.1 8.2 8.3 9 10 10.1 10.2 Bedienungs- und berwachungs-organe Hauptschalter Vorschubverstellung Hhenverstellung des Supports Verstellung des Sgenlagers Bedientafel mi
40、t Arm Sicherheitseinrichtungen (Beispiele) Rckschlagsicherungen Seitliche Abschirmung Support Rckschlagarm Verschiedenes Supportdeckel Absaugstutzen Reinigungsbrste (freier Abschnitt) Arbeitsbeispiele Besumen Zuschneiden Mandos Commutador general Mando de avance Mando del reglaje vertical del bastid
41、or superior Mando del reglaje del palier Mesa de mando sobre los brazos Dispositivos de seguridad (ejemplos) Lengueta antiretroceso Protector lateral Bastidor superior Dispositivo antiretroceso Diversos Puerta de la cubierta Boca de aspiracin Cepillo de limpieza (libre) Ejemplos de trabajo Ranurar C
42、ortar Comandi Interruttore generale Comando velocit di avanzamento Comando di regolazione verticale superiore Comando di regolazione verticale dellalbero Pannello di controllo su braccio Dispositivi di sicurezza (esempi) Dispositivo di antirigetto Protezione laterale Supporto Dispositivo antirigetto
43、 Varie Portello del supporto Bocca aspirazione polveri Spazzola pulitrice della catena (libero) Esempi di lavorazione Refilatura Taglio multiplo Manverorgan Matningsvxel Instllning av matningshastighet Instllning av presstryck Instllning av spindel Manverpanel p arm Skerhetsanordningar (exempel) ter
44、kastskydd Sidoskydd Kpa Fste fr terkastskydd Diverse Kplucka Stos fr spnutsug Rengringsborste (vakant) Arbetsexempel Kantsgning LamellsgningBS4361-19:1989 BSI 12-1999 Publication referred to See national foreword.BS4361-19: 1989 ISO7959:1987 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandar
45、dsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandard
46、s should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical co
47、mmittee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BS
48、I, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise
49、 requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial disco
