欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    ASTM D7668-2010 5000 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel OilsIgnition Delay and Combustion Delay Using a Constant Volume Combustion.pdf

    • 资源ID:526058       资源大小:214.29KB        全文页数:11页
    • 资源格式: PDF        下载积分:5000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要5000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    ASTM D7668-2010 5000 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel OilsIgnition Delay and Combustion Delay Using a Constant Volume Combustion.pdf

    1、Designation: D7668 10Standard Test Method forDetermination of Derived Cetane Number (DCN) of DieselFuel OilsIgnition Delay and Combustion Delay Using aConstant Volume Combustion Chamber Method1This standard is issued under the fixed designation D7668; the number immediately following the designation

    2、 indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method covers the quantitat

    3、ive determinationof the derived cetane number of conventional diesel fuel oils,diesel fuel oils containing cetane number improver additives,and is applicable to products typical of Specification D975,Grades No.1-D and 2-D regular, low and ultra-low-sulfurdiesel fuel oils, European standard EN590, an

    4、d Canadianstandards CAN/CGSB-3.517 and CAN/CGSB 3.6. The testmethod may be applied to the quantitative determination of thederived cetane number of blends of fuel oils containingbiodiesel material (for example, Specification D975, biodiesel,and diesel fuel oil blending components.1.2 This test metho

    5、d utilizes a constant volume combustionchamber with direct fuel injection into heated, compressedsynthetic air. A dynamic pressure wave is produced from thecombustion of the sample. An equation converts the ignitiondelay and the combustion delay determined from the dynamicpressure curve to a derived

    6、 cetane number (DCN).1.3 This test method covers the ignition delay ranging from2.8 to 6.5 ms and combustion delay ranging from 5.5 to 120 ms(30.0 to 65.0 DCN). However, the precision stated only coversthe range of DCN from 35 to 60.1.4 The values stated in SI units are to be regarded asstandard. No

    7、 other units of measurement are included in thisstandard.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bili

    8、ty of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2D613 Test Method for Cetane Number of Diesel Fuel OilD975 Specification for Diesel Fuel OilsD1193 Specification for Reagent WaterD4057 Practice for Manual Sampling of Petroleum andPetroleum ProductsD4175 Terminology

    9、 Relating to Petroleum, PetroleumProducts, and LubricantsD4177 Practice for Automatic Sampling of Petroleum andPetroleum ProductsD5854 Practice for Mixing and Handling of Liquid Samplesof Petroleum and Petroleum ProductsD6299 Practice for Applying Statistical Quality Assuranceand Control Charting Te

    10、chniques to Evaluate AnalyticalMeasurement System PerformanceD6300 Practice for Determination of Precision and BiasData for Use in Test Methods for Petroleum Products andLubricantsD6708 Practice for StatisticalAssessment and Improvementof Expected Agreement Between Two Test Methods thatPurport to Me

    11、asure the Same Property of a MaterialE456 Terminology Relating to Quality and Statistics2.2 EN Standards:3EN590 Automotive FuelsDieselRequirements and TestMethods2.3 Energy Institute Standards:4IP41 Ignition Quality of Diesel FuelsCetane Engine TestMethod1This test method is under the jurisdiction o

    12、f ASTM Committee D02 onPetroleum Products and Lubricants and is the direct responsibility of SubcommitteeD02.01.0C on Test Equipment, Procedures, and Instrumentation.Current edition approved Oct. 1, 2010. Published November 2010. DOI:10.1520/D766810.2For referenced ASTM standards, visit the ASTM web

    13、site, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from European Committee for Standardization. Central Secretariat:rue de Stassart, 36,B-1050 Brussels

    14、, Belgium.4Available from Energy Institute, 61 New Cavendish St., London, WIG 7AR,U.K., http:/www.energyinst.org.uk.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.2.4 Canadian Standards:5CAN/CGSB-3.517 Regular Sulphur Diesel FuelSpe

    15、cificationCAN/CGSB 3.6 Automotive Low-Sulphur Diesel FuelSpecification2.5 DIN Standards:6DIN 73372 Einspritzdsen Grsse T und U3. Terminology3.1 Definitions:3.1.1 accepted reference value (ARV), na value thatserves as an agreed-upon reference for comparison and that isderived as (1) a theoretical or

    16、established value, based onscientific principles, (2) an assigned value, based on experi-mental work of some national or international organization,such as the U.S. National Institute of Standards and Technol-ogy (NIST), or (3) a consensus value, based on collaborativeexperimental work under the aus

    17、pices of a scientific orengineering group. E4563.1.1.1 DiscussionIn the context of this method, acceptedreference value is understood to apply to the ignition delay andthe combustion delay of specific reference materials deter-mined under reproducibility conditions by collaborative ex-perimental wor

    18、k.3.1.2 cetane number, na measure of the ignition perfor-mance of a diesel fuel oil obtained by comparing it to referencefuels in a standardized engine test. D41753.1.2.1 DiscussionIn the context of this test method,cetane number is that defined by Test Method D613/IP41.3.1.3 check standard, nin QC

    19、testing, a material havingan accepted reference value used to determine the accuracy ofa measurement system.3.1.3.1 DiscussionIn the context of this test method,check standard refers to the calibration reference material.3.1.4 quality control (QC) sample, nfor use in qualityassurance programs to det

    20、ermine and monitor the precision andstability of a measurement system, a stable and homogeneousmaterial having physical or chemical properties, or both,similar to those of typical samples tested by the analyticalmeasurement system. The material is properly stored to ensuresample integrity, and is av

    21、ailable in sufficient quantity forrepeated, long term testing. D62993.2 Definitions of Terms Specific to This Standard:3.2.1 calibration reference material, na pure chemical ora specified mixture of pure chemicals having an assignedignition delay accepted reference value and an assigned com-bustion

    22、delay accepted reference value.3.2.2 chamber wall temperature, ntemperature, in C, ofthe combustion chamber wall.3.2.3 charge air, ncompressed synthetic air at a specifiedpressure introduced into the combustion chamber at the begin-ning of each test cycle.3.2.4 combustion analyzer, nan integrated co

    23、mpressionignition apparatus to measure the ignition and combustioncharacteristics of diesel fuel oil.3.2.5 combustion delay (CD), nthat period of time, inmilliseconds (ms), between the start of fuel injection andmid-point of the combustion pressure curve.3.2.5.1 DiscussionIn the context of this test

    24、 method, thestart of fuel injection is interpreted as the rise in the electronicsignal that opens the injector and the combustion pressurecurve mid-point is interpreted as the part of the pressure curvemidway between the chamber static pressure and the maximumpressure generated during the combustion

    25、 cycle, as measuredby a pressure sensor in the combustion chamber. The combus-tion delay CD measures the time between the injection of thesample and phase of combustion controlled by the diffusivemixing of the air and fuel.3.2.6 derived cetane number (DCN), na number calcu-lated using a conversion e

    26、quation to determine a cetanenumber.3.2.6.1 DiscussionThe conversion equation relates a mea-sured ignition delay or ignition delay and combustion delayfrom a combustion analyzer, to a cetane number.3.2.7 ignition delay (ID), nthat period of time, in milli-seconds (ms), between the start of fuel inje

    27、ction and the start ofcombustion as determined using the specific combustion ana-lyzer applicable for this test method.3.2.7.1 DiscussionIn the context of this test method, startof fuel injection is interpreted as the rise in the electronic signalthat opens the injector; combustion is interpreted as

    28、 the part ofthe pressure curve generated during the combustion cycle whensignificant (+0.02 MPa above the chamber static pressure) andsustained increase in rate-of-change in pressure, as measuredby a pressure sensor in the combustion chamber.3.2.8 injection period, nthe period of time, in microsec-o

    29、nds (s), that the fuel injector nozzle is open as determined bythe length of the electronic signal, in microseconds, that opensthe injector.3.2.9 operation period, nthe time, not to exceed 12 h,between successive calibration or QC testing, or both, of thecombustion analyzer by a single operator.3.3

    30、Abbreviations:3.3.1 ARVaccepted reference value3.3.2 CDcombustion delay3.3.3 CNcetane number3.3.4 DCNderived cetane number3.3.5 IDignition delay3.3.6 QCquality control4. Summary of Test Method4.1 A small specimen of sample is injected into a heated,temperature-controlled, constant volume chamber, wh

    31、ich haspreviously been charged with compressed air of a specifiedquality. Each injection produces a compression ignition com-bustion cycle detected using a pressure sensor. The ignitiondelay and combustion delay are measured from the rise of theelectronic signal that activates the injector solenoid

    32、to twospecific points along the combustion pressure wave producedby the combustion cycle. A complete sequence comprises 5preliminary injection cycles and 15 subsequent injection cycles5Available from the Canadian General Standards Board, Sales Centre, Gatineau,Canada, K1A1G6. www.ongc-cgsb.ca.6Avail

    33、able from Beuth Verlag GmbH (DIN- DIN Deutsches Institut furNormung e.V.), Burggrafenstrasse 6, 10787, Berlin, Germany, http:/www.en.din.de.D7668 102used for the sample analysis. The ID and CD measurements forthe last 15 injection cycles are statistically reviewed and theoutlying IDs and CDs are eli

    34、minated using Peirces Crite-rion.7The remaining IDs and CDs are averaged to producethe two independent results. An equation converts the averageID result and the average CD result into a DCN.5. Significance and Use5.1 The ID and CD values and the DCN value determinedby this test method provides a me

    35、asure of the ignitioncharacteristics of diesel fuel oil used in compression ignitionengines.5.2 This test can be used by engine manufacturers, petro-leum refiners and marketers, and in commerce as a specifica-tion aid to relate or match fuels and engines.5.3 The relationship of diesel fuel oil DCN d

    36、eterminationsto the performance of full-scale, variable-speed, variable-loaddiesel engines is not completely understood.5.4 This test can be applied to non-conventional dieselfuels.5.5 This test determines ignition characteristics and requiresa sample of approximately 370 mL and a test time ofapprox

    37、imately 30 min using a fit-for-use instrument.6. Interferences6.1 WarningMinimize exposure of sample fuels, calibra-tion reference materials, QC samples, and check standards tosunlight or fluorescent lamp UV emissions to minimize in-duced chemical reactions that can affect the delay measure-ments.86

    38、.1.1 Exposure of these fuels and materials to UV wave-lengths shorter than 550 nm for a short period of time cansignificantly affect ignition delay measurements.NOTE 1The formation of peroxide and radicals can affect ignitiondelay measurement. These formations are minimized when the sample ormateria

    39、l is stored in the dark in a cold room at a temperature of less than10C and covered by a blanket of nitrogen.7. Apparatus7.1 GeneralThis test method uses an integrated auto-mated analytical measurement system9comprised of:7.1.1 Combustion ChamberA cylindrical chamber havinga volume of 0.473 6 005 L,

    40、 with external heating elements,heat shield, and electrically actuated intake and exhaust valves.There is an opening at one end of the chamber to accommodateinsertion of the fuel injection nozzle assembly and there areopenings at the other end of the chamber to insert air, removeexhaust, and attach

    41、a pressure sensor.7.1.2 Fuel Injection SystemA high pressure sample, gen-erated using a hydraulic pump and pressure multiplier, isdelivered to a commercial electronic diesel fuel injector. Asample reservoir supplies the pressure multiplier with sampleto ensure proper and repeatable injection of cali

    42、bration, QCmaterial, and test specimens into the combustion chamber. Thesystem includes:7.1.2.1 Fuel Sample ReservoirA metal reservoir having anominal volume of 200 mL.7.1.2.2 Hydraulic PumpCapable of producing fuel pres-sures up to 19 MPa.7.1.2.3 Pressure Multiplier10:1 ratio.7.1.2.4 Fuel InjectorA

    43、solenoid-based common rail dieselfuel injector from Bosch with the part number 0445110181(Annex A6).7.1.2.5 Safety Burst DiskRelieves the high pressure if thesample pressure exceeds 180 MPa. The burst disk is attached tothe high pressure sample system manifold block opposite theinjector.7.1.2.6 Flus

    44、h ValveHigh pressure air actuated valve usedto exchange samples.7.1.3 Coolant SystemA closed loop circulating coolantsystem to control the temperature of the combustion injectornozzle and dynamic pressure sensor. The system includes anauxiliary heat exchanger with built-in circulating pump andflow c

    45、ontrol valves.7.1.4 Instrument SensorsSensors used to measure andeither indicate the value of a variable or transmit the conditionfor control or data acquisition purposes such as:7.1.4.1 Combustion Chamber Static Pressure SensorAcalibrated sensor installed to correct the temperature offset ofdynamic

    46、 pressure sensor.7.1.4.2 Combustion Chamber Dynamic Pressure SensorAcalibrated sensor installed to measure the pressure within thecombustion chamber.7.1.4.3 Sample Pressure SensorA calibrated sensor in-stalled to measure the pressure of the sample injected into thecombustion chamber.7.1.4.4 Nitrogen

    47、 Pressure SensorA sensor installed tomeasure the inlet pressure from the nitrogen regulator.7.1.4.5 Combustion Chamber Inner Wall TemperatureSensorType K thermocouple with a stainless steel sheath.7.1.4.6 Injector Nozzle Cooling Jacket TemperatureSensorType K thermocouple with stainless steel sheath

    48、,inserted in the injector nozzle coolant passage.7.1.5 Computerized Control, Data Acquisition, Data Analy-sis and Reporting SystemA microprocessor controlled sys-tem with a keyboard for manual entry of operating instructions,an LCD monitor for visual observation of all testing functions,and a printe

    49、r for printed copy output of test results. Thecomputer-based system provides automated control of therelevant combustion analyzer and subsystem component func-tions and collects and processes all relevant signals from thetemperature and pressure sensors.7.2 Instrument SchematicAschematic of the instrument isreproduced in Annex A4.7.3 Compressed Gas Pressure Regulators:7Ross, Stephen, “Peirces Criterion for the Elimination of Suspect ExperimentalData,” Journal of Engineering Technology, Fall 2003.8Supporting data, “Sunl


    注意事项

    本文(ASTM D7668-2010 5000 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel OilsIgnition Delay and Combustion Delay Using a Constant Volume Combustion.pdf)为本站会员(inwarn120)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开