欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    ASTM D7098-2006e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B《用薄膜氧气吸收(TFOUT)催化剂B测定润滑剂氧化稳定性的标准试验方法》.pdf

    • 资源ID:524488       资源大小:432.32KB        全文页数:10页
    • 资源格式: PDF        下载积分:5000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要5000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    ASTM D7098-2006e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B《用薄膜氧气吸收(TFOUT)催化剂B测定润滑剂氧化稳定性的标准试验方法》.pdf

    1、Designation: D 7098 06e1An American National StandardStandard Test Method forOxidation Stability of Lubricants by Thin-Film OxygenUptake (TFOUT) Catalyst B1, 2This standard is issued under the fixed designation D 7098; the number immediately following the designation indicates the year oforiginal ad

    2、option or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.e1NOTEAdjusted footnote placement and added Summary of Changes editorially in Apr

    3、il 2007.1. Scope*1.1 This test method covers the oxidation stability oflubricants by thin-film oxygen uptake (TFOUT) Catalyst B.This test method evaluates the oxidation stability of petroleumproducts, and it was originally developed as a screening test toindicate whether a given re-refined base stoc

    4、k could beformulated for use as automotive engine oil3(see Test MethodD 4742). The test is run at 160C in a pressure vessel underoxygen pressure, and the sample contains a metal catalystpackage, a fuel catalyst, and water to partially simulate oilconditions in an operating engine. In addition, the t

    5、est methodhas since been found broadly useful as an oxidation test ofpetroleum products.41.2 The applicable range of the induction time is from a fewminutes up to several hundred minutes or more. However, therange of induction times used for developing the precisionstatements in this test method was

    6、 from 40 to 280 min.1.3 The values stated in SI units are to be regarded as thestandard. The values given in parentheses are for informationonly.1.4 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this stand

    7、ard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:5A 314 Specification for Stainless Steel Billets and Bars forForgingB211 Specification for Aluminum and Aluminum-AlloyBar, Rod,

    8、and WireD 664 Test Method forAcid Number of Petroleum Productsby Potentiometric TitrationD 1193 Specification for Reagent WaterD 2272 Test Method for Oxidation Stability of Steam Tur-bine Oils by Rotating Pressure VesselD 4742 Test Method for Oxidation Stability of GasolineAutomotive Engine Oils by

    9、Thin-Film Oxygen Uptake(TFOUT)E1 Specification for ASTM Liquid-in-Glass ThermometersE 144 Practice for Safe Use of Oxygen Combustion Bombs3. Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 break pointthe precise point of time at which rapidoxidation of the oil begins.3.1.2 oxidat

    10、ion induction timethe time until the oil beginsto oxidize at a relatively rapid rate as indicated by the decreaseof oxygen pressure.3.1.3 oxygen uptakeoxygen absorbed by oil as a result ofoil oxidation.4. Summary of Test Method4.1 The test oil is mixed in a glass container with four otherliquids use

    11、d to simulate engine conditions: (1) an oxidized/nitrated fuel component (Annex A3), (2) a mixture of solublemetal naphthenates (lead, iron, manganese, and tin naphthen-ates (Annex A4), (3) a nitro-paraffinic compound, and (4) TypeII reagent water.4.2 The glass container holding the oil mixture is p

    12、laced ina pressure vessel equipped with a pressure sensor. The pressure1This test method is under the jurisdiction of ASTM Committee D02 onPetroleum Products and Lubricants and is the direct responsibility of SubcommitteeD02.09.0G on Oxidation Testing of Engine Oils.Current edition approved May 1, 2

    13、006. Published June 2006. Originallyapproved in 2005. Last previous edition approved in 2005 as D 709805.2While Catalyst B can be used for testing oxidation stability of many lubricanttypes, the mixture of fuel, nitro-paraffin, and catalyst components used in this testmethod simulates the Sequence I

    14、IIE Engine Test. Test results on several ASTMreference oils have been found to correlate with Sequence IIIE engine tests in hoursfor a 375 % viscosity increase. (See Ku, Chia-Soon, Pei, Patrick T., and Hsu,Stephen M., “A Modified Thin-Film Oxygen Uptake Test (TFOUT) for theEvaluation of Lubricant St

    15、ability in ASTM Sequence IIIE Test, SAE TechnicalPaper Series 902121, Tulsa, OK, Oct. 22-25, 1990.)3Ku, C. S. and Hsu, S. M., “A Thin Film Uptake Test for the Evaluation ofAutomotive Lubricants,” Lubrication Engineering, 40, 2, 1984, pp. 7583.4Selby, Theodore W., “Oxidation Studies with a Modified T

    16、hin-Film OxygenUptake Test”, SAE Technical Paper Series 872127, Toronto, Ontario, Nov. 2-5,1987.5For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Docume

    17、nt Summary page onthe ASTM website.1*A Summary of Changes section appears at the end of this standard.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.vessel is sealed, charged with oxygen to a pressure of 620 kPa(90 psig), and placed

    18、in an oil bath at 160C at an angle of 30from the horizontal. The pressure vessel is rotated axially at aspeed of 100 r/min forming a thin film of oil within the glasscontainer resulting in a relatively large oil-oxygen contact area.4.3 The pressure of the pressure vessel is recorded continu-ously fr

    19、om the beginning of the test and the test is terminatedwhen a rapid decrease of the pressure vessel pressure isobserved (Point B, Fig. 1). The period of time that elapsesbetween the time when the pressure vessel is placed in the oilbath and the time at which the pressure begins to decreaserapidly is

    20、 called the oxidation induction time and is used as ameasure of the relative oil oxidation stability.5. Significance and Use5.1 This test method was originally developed to evaluateoxidation stability of lubricating base oils combined withadditives chemistries similar to those found in gasoline engi

    21、neoils and service.25.2 This test method is useful for screening formulated oilsbefore engine tests. Within similar additive chemistries andbase oil types, the ranking of oils in this test appears to bepredictive of ranking in certain engine tests. When oils havingdifferent additive chemistries or b

    22、ase oil type are compared,results may or may not reflect results in engine tests. Onlygasoline engine oils were used in generating the precisionstatements in this test method.6. Apparatus6.1 Oxidation Bath and Pressure VesselSee appropriateAnnex (Annex A16or Annex A27) for detailed description ofapp

    23、aratus and accessories for equipment described in this testmethod.NOTE 1To reduce vapor odors when opening pressure vessel afteruse, a hood may be desirable.6.2 Precision Pressure GaugeUse a certified precisionpressure gauge to accurately control the oxygen feed to thepressure vessel. The gauge shal

    24、l have a sufficient range toencompass 0 to 650 kPa (90 psig) required by the test methodwith division 2.0 kPa (0.5 psig) or better to enable readings tobe made to 2.0 kPa (0.25 psig).7. Reagents7.1 Purity of ReagentsReagent grade chemicals shall beused in all tests. Unless otherwise indicated, it is

    25、 intended thatall reagents shall conform to the specifications of the Commit-tee onAnalytical Reagents of theAmerican Chemical Society.87.2 Purity of WaterUnless otherwise indicated, referencesto reagent water shall be understood to mean distilled watermeeting requirements of reagent water as define

    26、d by Type II ofSpecification D 1193.7.3 Acetone,CH3COCH3.7.4 Air, containing 2000 ppm nitrogen dioxide,NO2(commercially available compressed gas mixture, certi-fied within 65 %).7.5 Cyclo-hexane,C6H12, Practical Grade or other suitablehydrocarbon solvent. (WarningHighly flammable. Skin ir-ritant on

    27、repeated contact. Aspiration hazard.)7.6 Isopropyl Alcohol,CH3CH(CH3)OH.7.7 Oxygen, 99.8 %.8. Materials8.1 TFOUT Catalyst B Package:78.1.1 Fuel ComponentThe fuel component is a nitratedgasoline fraction or organic equivalent. This component maybe prepared in accordance with the procedures described

    28、inAnnex A3.8.1.2 Soluble Metal Catalyst MixtureThis catalyst is amixture of soluble metal catalysts (lead, iron, manganese, andtin). The catalyst may be prepared according to the proceduresdescribed in Annex A4.8.1.2.1 Other oxidation stability test methods have demon-strated that soluble metal cata

    29、lyst supplies may be inconsistentand have significant effects on the test results. Thus, for testcomparisons, the same source and same batch of metalnaphthenates shall be used.NOTE 2It is good research practice to use the same batches of catalystcomponents when closely comparing engine oils.NOTE 3Sl

    30、ow, steady reactivity of some of the catalyst chemicals canbe a problem. Such problems can be reduced by storing the closed catalystvials in a refrigerator at approximately 5C.6The sole source of supply of the apparatus known to the committee at this timeis Koehler Instrument Co., Inc., 1595 Sycamor

    31、e Ave., Bohemia, NY11716 andStanhope-Seta, London St., Chertsey, Surrey, KT16 8AP, U.K. If you are aware ofalternative suppliers, please provide this information to ASTM InternationalHeadquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee,1wh

    32、ich you may attend.7The sole source of supply of the apparatus known to the committee at this timeis Tannas Co., 4800 James Savage Rd., Midland, MI 48642. If you are aware ofalternative suppliers, please provide this information to ASTM InternationalHeadquarters. Your comments will receive careful c

    33、onsideration at a meeting of theresponsible technical committee,1which you may attend.8Reagent Chemicals, American Chemical Society Specifications, AmericanChemical Society, Washington, DC. For suggestions on the testing of reagents notlisted by the American Chemical Society, see Analar Standards fo

    34、r LaboratoryChemicals, BDH Ltd., Poole, Dorset, U.K., and the United States Pharmacopeiaand National Formulary, U.S. Pharmacopeial Convention, Inc. (USPC), Rockville,MD.FIG. 1 Pressure versus Time Diagram of the Oxidation TestD709806e128.1.3 Nitro-paraffnThis compound is made up of a nitri-alkane bl

    35、end.NOTE 4Suitably prepared catalyst packages may be purchased fromTannas Co.78.2 Varnish and Deposit Remover, water-soluble varnishremover or other engine varnish/deposit removers.8.3 Silicone Stopcock Grease.9. Preparation of Apparatus9.1 Glass Sample ContainerA clean glass sample con-tainer is im

    36、portant for obtaining repeatable results. Thoroughcleaning can be accomplished by (a) rinsing with cyclo-hexaneor other suitable hydrocarbon solvent, (b) soaking in concen-trated solution of a water-soluble varnish remover, (c) thor-oughly rinsing with water, (d) rinsing with acetone, (e) andpermitt

    37、ing to dry.NOTE 5A segmented glass reaction dish has been found suitable toprevent premature mixing of the catalyst components (see Fig. A2.4)9.2 Cleaning of Pressure VesselFill with concentratedsolution of a water-soluble varnish remover and soak forsuitable time, rinse with water, rinse with aceto

    38、ne, and permitto dry.9.3 Cleaning of Pressure Vessel StemPeriodically disas-semble, inspect, and clean the pressure vessel stem. Rinse theinside of the stem with isopropyl alcohol and blow dry with oilfree compressed air. For users of apparatus described in AnnexA1, periodically insert a dry pipe cl

    39、eaner into the transducerline opening for removal of potential residue buildup.NOTE 6Replace O-rings when reassembling the pressure transducers.9.4 Periodically pressure test the pressure vessels at 690 kPa(100 psi) with air or oxygen. If the pressure drops more than0.690 kPa (0.1 psi) on the pressu

    40、re gauge within 60 s, replacethe O-ring seals and inspect the valve seals according tomanufacturers directions. If the problem continues, contact thespecific equipment manufacturer.NOTE 7Previous versions of this test method have called for hydro-static testing of the pressure vessel. This was found

    41、 unnecessary at therelatively low pressures involved in running this test method.9.5 Cleaning of Catalyst SyringesUse individual catalystsyringes for each catalyst component. Thoroughly clean anddry syringes prior to each use. (See Annex A5 for recom-mended procedure.)10. Procedure10.1 Weighing and

    42、Mixing Sample and Catalyst Compo-nents:10.1.1 Place the clean glass sample container onto theprecision balance and tare.10.1.2 Weigh 1.500 6 0.001 g of oil sample into thecontainer and tare.10.1.3 Add 0.045 6 0.001 g of the soluble metal catalystmixture into the glass sample container and tare.10.1.

    43、4 Add 0.030 6 0.001 g each of the fuel component,nitro-paraffin and reagent water to the glass sample containerand tare each time. It is easiest to add the distilled water lastand place on top of the oil sample.10.1.5 Just prior to inserting the glass sample container intothe pressure vessel, thorou

    44、ghly mix the catalyst componentswithin the sample container by hand-rotation (approximatelyfive rotations) and proceed immediately to 10.2. Delay mayresult in variation of results.10.2 Pressure Vessel Assembly and ChargingImmediatelyand rapidly assemble and charge the pressure vessel in accor-dance

    45、with apparatus type (see A1.2 or A2.7).NOTE 8Avoid releasing the oxygen too rapidly by decreasing thepressure to atmospheric in no less than 1 min to avoid possible foamingand overflow of the sample from the glass sample container.10.3 OxidationBefore starting the test, bring the heatingbath to the

    46、test temperature at 160C and insert the pressurevessel(s) in accordance with apparatus type (seeA1.3 orA2.8).10.3.1 Allow the bath temperature to level out at the testtemperature, which must occur within 15 min after insertion ofthe pressure vessel. Maintaining the test temperature within thespecifi

    47、ed limits of 160 6 0.3C during the entire test run is themost important single factor ensuring both repeatability andreproducibility of test results. If the test temperature cannot bemaintained as specified, the test results shall not be consideredvalid.NOTE 9The time for the bath to reach the opera

    48、ting temperature afterinsertion of the pressure vessel may differ for different apparatus assem-blies and shall be observed for each unit (a unit may carry one, two, three,or four pressure vessels). The objective is to find a set of conditions, whichdoes not permit a drop of more than 2C after inser

    49、tion of the pressurevessel(s) and allows the pressure vessel pressure to reach plateau within15 min.10.4 Keep the pressure vessel completely submerged andmaintain continuous and uniform rotation throughout the test.A standard rotational speed of 100 6 5 r/min is required; anyvariation in this speed could cause erratic results.10.5 Monitor the pressure of the pressure vessel preferablyusing a strip chart or some other form of electronic datacollection program. If a dial pressure gauge is used, makereadings at least every 5 min. (The maximum pres


    注意事项

    本文(ASTM D7098-2006e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B《用薄膜氧气吸收(TFOUT)催化剂B测定润滑剂氧化稳定性的标准试验方法》.pdf)为本站会员(confusegate185)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开