1、Designation: D2190 07 (Reapproved 2013)Standard Specification forVinyl Acetate1This standard is issued under the fixed designation D2190; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parent
2、heses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers vinyl acetate.1.2 The following applies to all specified limits in thisstandard; for purposes of determining conformance with
3、 thisstandard, an observed value or a calculated value shall berounded off “to the nearest unit” in the last right-hand digitused in expressing the specification limit, in accordance withthe rounding-off method of Practice E29.1.3 The values stated in SI units are to be regarded asstandard. No other
4、 units of measurement are included in thisstandard.1.4 For specific hazard information and guidance, see thesuppliers Material Safety Data Sheet for materials listed in thisspecification.2. Referenced Documents2.1 ASTM Standards:2D268 Guide for Sampling and Testing Volatile Solvents andChemical Inte
5、rmediates for Use in Paint and RelatedCoatings and MaterialD1078 Test Method for Distillation Range of Volatile Or-ganic LiquidsD1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)D1364 Test Method for Water in Volatile Solvents (KarlFischer Reagent Titration Method)D2086 Test Method
6、 for Acidity in Vinyl Acetate and Acet-aldehydeD2191 Test Method for Acetaldehyde Content of VinylAcetateD2193 Test Method for Hydroquinone in Vinyl AcetateD4052 Test Method for Density, Relative Density, and APIGravity of Liquids by Digital Density MeterD5386 Test Method for Color of Liquids Using
7、TristimulusColorimetryE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE300 Practice for Sampling Industrial Chemicals2.2 U.S. Federal Standard:PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packagingof33. Sampling3.1 Sample the material in accordance
8、with Practice E300.4. Properties4.1 The vinyl acetate shall conform to the following require-ments:Distillation range, C 71.8 to 73.0Apparent specific gravity, 20/20C 0.9335 to 0.9345Color (HQ grade only), Pt-Co scale, max (Note 1) 5Water content, weight %, max 0.05Acetaldehyde content, weight %, ma
9、x 0.02Acidity, as acetic acid, weight %, max 0.005Inhibitor content (HQ)AAAs agreed upon between the purchaser and the manufacturer.NOTE 1Instrumental Pt-Co color determined by Test Method D5386has been shown to have no statistically significant difference from Pt-Cocolor determined by Test Method D
10、1209. However, it is not knownwhether vinyl acetate was part of the sample set included in theinterlaboratory study.5. Test Methods5.1 The properties enumerated in this specification shall bedetermined in accordance with the following ASTM methods:5.1.1 Apparent Specific GravityDetermine the apparen
11、tspecific gravity by any convenient method that is accurate tothe fourth decimal place, the temperature of both specimen andwater being 20C. (See Guide D268 or Test Method D4052.)5.1.2 ColorTest Method D1209 (see Note 1).5.1.3 Distillation RangeTest Method D1078, using a tem-perature measuring devic
12、e having a range of 48 to 102C, anda resolution of 0.1C.5.1.4 WaterTest Method D1364.1This specification is under the jurisdiction of ASTM Committee D01 on Paintand Related Coatings, Materials, and Applications and is the direct responsibility ofSubcommittee D01.35 on Solvents, Plasticizers, and Che
13、mical Intermediates.Current edition approved June 1, 2013. Published June 2013. Originallyapproved in 1963. Last previous edition approved in 2007 as D2190 07. DOI:10.1520/D2190-07R13.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm
14、.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http:/www.dodssp.daps.mil.Copyright ASTM Internat
15、ional, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States15.1.5 AcetaldehydeTest Method D2191.5.1.6 AcidityTest Method D2086.5.1.7 Inhibitor ContentTest Method D2193.6. Packaging and Package Marking6.1 Package size shall be agreed upon between the pur-chaser and the
16、supplier.6.2 Packaging shall conform to applicable carrier rules andregulations or, when specified, shall conform to Fed. Spec.PPP-C-2020.7. Keywords7.1 vinyl acetateASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin thi
17、s standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be
18、 reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresp
19、onsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, We
20、st Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).D2190 07 (2013)2
