欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    ASTM A240 A240M-2016a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate Sheet and Strip for Pressure Vessels and for General Applications《压力容器和通用应用的铬和铬镍.pdf

    • 资源ID:457800       资源大小:115.83KB        全文页数:14页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    ASTM A240 A240M-2016a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate Sheet and Strip for Pressure Vessels and for General Applications《压力容器和通用应用的铬和铬镍.pdf

    1、Designation: A240/A240M 16aStandard Specification forChromium and Chromium-Nickel Stainless Steel Plate,Sheet, and Strip for Pressure Vessels and for GeneralApplications1This standard is issued under the fixed designation A240/A240M; the number immediately following the designation indicates the yea

    2、rof original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.A superscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Dep

    3、artment of Defense.1. Scope*1.1 This specification2covers chromium, chromium-nickel,and chromium-manganese-nickel stainless steel plate, sheet,and strip for pressure vessels and for general applicationsincluding architectural, building, construction, and aestheticapplications.1.2 The values stated i

    4、n either SI units or inch-pound unitsare to be regarded separately as standard. The values stated ineach system may not be exact equivalents; therefore, eachsystem shall be used independently of the other. Combiningvalues from the two systems may result in non-conformancewith the standard.1.3 This s

    5、pecification is expressed in both inch-pound andSI units. However, unless the order specifies the applicable“M” specification designation (SI units), the material shall befurnished in inch-pound units.1.4 This standard does not purport to address all of thesafety concerns, if any, associated with it

    6、s use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:3A370 Test Methods and Definitions for Mechanical Testingof Steel Produc

    7、tsA480/A480M Specification for General Requirements forFlat-Rolled Stainless and Heat-Resisting Steel Plate,Sheet, and StripA923 Test Methods for Detecting Detrimental IntermetallicPhase in Duplex Austenitic/Ferritic Stainless SteelsE112 Test Methods for Determining Average Grain SizeE140 Hardness C

    8、onversion Tables for Metals RelationshipAmong Brinell Hardness, Vickers Hardness, RockwellHardness, Superficial Hardness, Knoop Hardness, Sclero-scope Hardness, and Leeb HardnessE527 Practice for Numbering Metals and Alloys in theUnified Numbering System (UNS)2.2 SAE Standard:4J 1086 Practice for Nu

    9、mbering Metals and Alloys (UNS)3. General Requirements3.1 The following requirements for orders for materialfurnished under this specification shall conform to the appli-cable requirements of the current edition of SpecificationA480/A480M.3.1.1 Definitions;3.1.2 General requirements for delivery;3.1

    10、.3 Ordering information;3.1.4 Process;3.1.5 Special tests;3.1.6 Heat treatment;3.1.7 Dimensions and permissible variations;3.1.8 Workmanship, finish and appearance;3.1.9 Number of tests/test methods;3.1.10 Specimen preparation;3.1.11 Retreatment;3.1.12 Inspection;3.1.13 Rejection and rehearing;3.1.1

    11、4 Material test report;3.1.15 Certification; and3.1.16 Packaging, marking, and loading.1This specification is under the jurisdiction of ASTM Committee A01 on Steel,Stainless Steel and Related Alloys and is the direct responsibility of SubcommitteeA01.17 on Flat-Rolled and Wrought Stainless Steel.Cur

    12、rent edition approved Dec. 1, 2016. Published January 2017. Originallyapproved in 1940. Last previous edition approved in 2016 as A240/A240M 16.DOI: 10.1520/A0240_A0240M-16A.2For ASME Boiler and Pressure Vessel Code applications see related Specifi-cation SA-240 in Section II of that Code.3For refer

    13、enced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.4Available from Society of Automotive Engineers (SAE), 400 Commonwealth

    14、Dr., Warrendale, PA 15096-0001, http:/www.sae.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United StatesThis international standard was developed in accordance with internation

    15、ally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.14. Chemical Composition4.1 The steel shall conform to

    16、the requirements as tochemical composition specified in Table 1 and shall conform toapplicable requirements specified in Specification A480/A480M.5. Mechanical Properties5.1 The material shall conform to the mechanical propertiesspecified in Table 2.5.2 When specified by the purchaser, Charpy impact

    17、 testsshall be performed in accordance with Supplementary Require-ment S1.6. Materials for High-Temperature Service6.1 The austenitic H Types shall conform to an averagegrain size of ASTM No. 7 or coarser as measured by TestMethods E112.6.2 Supplementary Requirement S2 shall be invoked whennon-H gra

    18、de austenitic stainless steels are ordered for ASMECode applications for service above 1000F 540C.6.3 Grade S31060, unless otherwise specified in the pur-chase order, shall conform to an average grain size of ASTMNo. 7 or coarser, as measured by Test Methods E112.7. Keywords7.1 architectural; buildi

    19、ng; chromium; chromium-nickelstainless steel; chromium-manganese-nickel stainless steel;construction; pressure vesselsA240/A240M 16a2TABLE1ChemicalCompositionRequirements,%AUNS DesignationBTypeCCarbonDManganesePhos- phorusSulfurSiliconChromiumNickelMolybdenumNitrogenCopperOtherElementsE,FAustenitic(

    20、Chromium-Nickel)(Chromium-Manganese-Nickel)N08020.0.072.000.0450.0351.0019.021.032.038.02.003.00.3.004.00Cb8Cmin,1.00maxN08367.0.0302.000.0400.0301.0020.022.023.525.56.07.00.180.250.75.N08700.0.042.000.0400.0301.0019.023.024.026.04.35.0.0.50Cb8Cmin0.40maxN08800800G0.101.500.0450.0151.0019.023.030.03

    21、5.0.0.75FeH39.5minAl0.150.60Ti0.150.60N08810800HG0.050.101.500.0450.0151.0019.023.030.035.0.0.75FeH39.5minAl0.150.60Ti0.150.60N08811.0.060.101.500.0400.0151.0019.023.030.035.0.0.75FeH39.5minTiI0.250.60AlI0.250.60N08904904LG0.0202.000.0450.0351.0019.023.023.028.04.005.000.101.002.00.N08925.0.0201.000

    22、.0450.0300.5019.021.024.026.06.007.000.100.200.801.50.N08926.0.0202.000.0300.0100.5019.021.024.026.06.007.000.150.250.501.50.S201002010.155.507.500.0600.0301.0016.018.03.55.5.0.25.S20103.0.035.507.500.0450.0300.7516.018.03.55.5.0.25.S20153.0.036.407.500.0450.0150.7516.017.54.05.0.0.100.251.00.S20161

    23、.0.154.006.000.0400.0403.004.0015.018.04.06.0.0.080.20.S202002020.157.5010.000.0600.0301.0017.019.04.06.0.0.25.S20400.0.0307.009.000.0400.0301.0015.017.01.503.00.0.150.30.S20431.0.125.007.000.0450.0301.0017.018.02.04.0.0.100.251.503.50.S20432.0.083.005.000.0450.0301.0017.018.04.06.0.0.050.202.003.00

    24、.S20433.0.085.507.500.0450.0301.0017.018.03.55.5.0.100.251.503.50.S20910XM-19J0.064.006.000.0400.0300.7520.523.511.513.51.503.000.200.40.Cb0.100.30V0.100.30S21400XM-31J0.1214.0016.000.0450.0300.301.0017.018.51.00.0.35min.S21600XM-17J0.087.509.000.0450.0300.7517.522.05.07.02.003.000.250.50.S21603XM-1

    25、8J0.037.509.000.0450.0300.7517.522.05.07.02.003.000.250.50.S21640.0.083.506.500.0600.0301.0017.519.54.06.50.502.000.080.30.Cb0.101.00S21800.0.107.009.000.0600.0303.54.516.018.08.09.0.0.080.18.S21904XM-11J0.048.0010.000.0600.0300.7519.021.55.57.5.0.150.40.S24000XM-29J0.0811.5014.500.0600.0300.7517.01

    26、9.02.33.7.0.200.40.S301003010.152.000.0450.0301.0016.018.06.08.0.0.10.S30103301LG0.032.000.0450.0301.0016.018.06.08.0.0.20.S30153301LNG0.032.000.0450.0301.0016.018.06.08.0.0.070.20.S302003020.152.000.0450.0300.7517.019.08.010.0.0.10.S304003040.072.000.0450.0300.7517.519.58.010.5.0.10.S30403304L0.030

    27、2.000.0450.0300.7517.519.58.012.0.0.10.S30409304H0.040.102.000.0450.0300.7518.020.08.010.5.S30415.0.040.060.800.0450.0301.002.0018.019.09.010.0.0.120.18.Ce0.030.08S30435.0.082.000.0450.0301.0016.018.07.09.0.1.503.00.S30441.0.082.000.0450.0301.02.017.519.58.010.5.0.101.52.5Cb0.10.5W0.20.8S30451304N0.

    28、082.000.0450.0300.7518.020.08.010.5.0.100.16.S30452XM-21J0.082.000.0450.0300.7518.020.08.010.5.0.160.30.S30453304LN0.0302.000.0450.0300.7518.020.08.012.0.0.100.16.S305003050.122.000.0450.0300.7517.019.010.513.0.S30530.0.082.000.0450.0300.502.5017.020.58.511.50.751.50.0.753.50.S30600.0.0182.000.0200.

    29、0203.74.317.018.514.015.50.20.0.50.S30616.0.0201.500.0300.0153.9-4.716.5-18.513.0-15.50.50.0.40Cb.0.300.70S30601.0.0150.500.800.0300.0135.05.617.018.017.018.00.200.050.35.S30615.0.160.242.000.0300.0303.24.017.019.513.516.0.Al0.801.50S30815.0.050.100.800.0400.0301.402.0020.022.010.012.0.0.140.20.Ce0.

    30、030.08S30908309S0.082.000.0450.0300.7522.024.012.015.0.A240/A240M 16a3TABLE1ContinuedUNS DesignationBTypeCCarbonDManganesePhos- phorusSulfurSiliconChromiumNickelMolybdenumNitrogenCopperOtherElementsE,FS30909309HG0.040.102.000.0450.0300.7522.024.012.015.0.S30940309CbG0.082.000.0450.0300.7522.024.012.

    31、016.0.Cb10Cmin,1.10maxS30941309HCbG0.040.102.000.0450.0300.7522.024.012.016.0.Cb10Cmin,1.10maxS31008310S0.082.000.0450.0301.5024.026.019.022.0.S31009310HG0.040.102.000.0450.0300.7524.026.019.022.0.S31040310CbG0.082.000.0450.0301.5024.026.019.022.0.Cb10Cmin,1.10maxS31041310HCbG0.040.102.000.0450.0300

    32、.7524.026.019.022.0.Cb10Cmin,1.10maxS31050310MoLNG0.0202.000.0300.0100.5024.026.020.523.51.602.600.090.15.S31060.0.050.101.000.0400.0300.5022.024.010.012.5.0.180.25.Ce+La0.0250.070B0.0010.010S31254.0.0201.000.0300.0100.8019.520.517.518.56.06.50.180.250.501.00.S31266.0.0302.004.000.0350.0201.0023.025

    33、.021.024.05.26.20.350.601.002.50W1.502.50S31277.0.0203.000.0300.0100.5020.523.026.028.06.58.00.300.400.501.50.S316003160.082.000.0450.0300.7516.018.010.014.02.003.000.10.S31603316L0.0302.000.0450.0300.7516.018.010.014.02.003.000.10.S31609316H0.040.102.000.0450.0300.7516.018.010.014.02.003.00.S316353

    34、16TiG0.082.000.0450.0300.7516.018.010.014.02.003.000.10.Ti5(C+N)min,0.70maxS31640316CbG0.082.000.0450.0300.7516.018.010.014.02.003.000.10.Cb10Cmin,1.10maxS31651316N0.082.000.0450.0300.7516.018.010.014.02.003.000.100.16.S31653316LN0.0302.000.0450.0300.7516.018.010.014.02.003.000.100.16.S31655.0.0302.

    35、000.0450.0151.0019.521.58.09.50.501.500.140.251.00.S317003170.082.000.0450.0300.7518.020.011.015.03.04.00.10.S31703317L0.0302.000.0450.0300.7518.020.011.015.03.04.00.10.S31725317LMG0.0302.000.0450.0300.7518.020.013.517.54.05.00.20.S31726317LMNG0.0302.000.0450.0300.7517.020.013.517.54.05.00.100.20.S3

    36、1727.0.0301.000.0300.0301.0017.519.014.516.53.84.50.150.212.804.00.S31730.0.0302.000.0400.0101.0017.019.015.016.53.04.00.0454.05.0.S31753317LNG0.0302.000.0450.0300.7518.020.011.015.03.04.00.100.22.S32050.0.0301.500.0350.0201.0022.024.020.023.06.06.80.210.320.40.S32053.0.0301.000.0300.0101.0022.024.0

    37、24.026.05.06.00.170.22.S321003210.082.000.0450.0300.7517.019.09.012.0.0.10.Ti5(C+N)min,0.70maxS32109321H0.040.102.000.0450.0300.7517.019.09.012.0.Ti4(C+N)min,0.70maxS32615.0.072.000.0450.0304.806.0016.519.519.022.00.301.50.1.502.50.S32654.0.0202.004.000.0300.0050.5024.025.021.023.07.08.00.450.550.30

    38、0.60.S33228.0.040.081.000.0200.0150.3026.028.031.033.0.Ce0.050.10Cb0.61.0Al0.025S33400334G0.081.000.0300.0151.0018.020.019.021.0.Al0.150.60Ti0.150.60S33425.0.081.500.0450.0201.0021.023.020.023.02.003.00.Al0.150.60Ti0.150.60S33550.0.040.101.500.0400.0301.0025.028.016.520.0.0.180.25.Cb0.050.15La+Ce0.0

    39、250.070S34565.0.0305.007.000.0300.0101.0023.025.016.018.04.05.00.400.60.Cb0.10S347003470.082.000.0450.0300.7517.019.09.013.0.Cb10Cmin,1.00maxA240/A240M 16a4TABLE1ContinuedUNS DesignationBTypeCCarbonDManganesePhos- phorusSulfurSiliconChromiumNickelMolybdenumNitrogenCopperOtherElementsE,FS34709347H0.0

    40、40.102.000.0450.0300.7517.019.09.013.0.Cb8Cmin,1.00maxS34751347LN0.0050.0202.000.0450.0301.0017.019.09.013.0.0.060.10.Cb0.200.50,15CminS348003480.082.000.0450.0300.7517.019.09.013.0.(Cb+Ta)10Cmin,1.00maxTa0.10Co0.20S34809348H0.040.102.000.0450.0300.7517.019.09.013.0.(Cb+Ta)8Cmin,1.00maxTa0.10Co0.20S

    41、35045.0.060.101.500.0450.0151.0025.029.032.037.0.0.75Al0.150.60Ti0.150.60S35115.0.0301.000.0450.0150.501.5023.025.019.022.01.502.500.200.30.S35125.0.101.001.500.0450.0150.5020.023.031.035.02.003.00.Cb0.250.60S35135.0.081.000.0450.0150.601.0020.025.030.038.04.04.8.0.75Ti0.401.00S35140.0.101.003.000.0

    42、450.0300.7520.022.025.027.01.002.000.080.20.Cb0.250.75S35315.0.040.082.000.0400.0301.202.0024.026.034.036.0.0.120.18.Ce0.030.10S38100XM-15J0.082.000.0300.0301.502.5017.019.017.518.5.S38815.0.0302.000.0400.0205.506.5013.015.015.017.00.751.50.0.751.50Al0.30Duplex(Austenitic-Ferritic)S31200.0.0302.000.

    43、0450.0301.0024.026.05.56.51.202.000.140.20.S31260.0.031.000.0300.0300.7524.026.05.57.52.53.50.100.300.200.80W0.100.50S31803.0.0302.000.0300.0201.0021.023.04.56.52.53.50.080.20.S32001.0.0304.006.000.0400.0301.0019.521.51.003.000.600.050.171.00.S32003.0.0302.000.0300.0201.0019.522.53.04.01.502.000.140

    44、.20.S32101.0.0404.006.000.0400.0301.0021.022.01.351.700.100.800.200.250.100.80.S32202.0.0302.000.0400.0101.0021.524.01.002.800.450.180.26.S322052205G0.0302.000.0300.0201.0022.023.04.56.53.03.50.140.20.S323042304G0.0302.500.0400.0301.0021.524.53.05.50.050.600.050.200.050.60S32506.0.0301.000.0400.0150

    45、.9024.026.05.57.23.03.50.080.20.W0.050.30S32520.0.0301.500.0350.0200.8024.026.05.58.03.04.00.200.350.502.00.S32550255G0.041.500.0400.0301.0024.027.04.56.52.93.90.100.251.502.50.S327502507G,O0.0301.200.0350.0200.8024.026.06.08.03.05.00.240.320.50.S32760K.0.0301.000.0300.0101.0024.026.06.08.03.04.00.2

    46、00.300.501.00W0.501.00S32808.0.0301.100.0300.0100.5027.027.97.08.20.801.20.300.40.W2.102.50S329003290.081.000.0400.0300.7523.028.02.05.001.002.00.S32906.0.0300.801.500.0300.0300.8028.030.05.87.51.502.600.300.400.80.S32950.0.0302.000.0350.0100.6026.029.03.55.21.002.500.150.35.S39274.0.0301.000.0300.0200.8


    注意事项

    本文(ASTM A240 A240M-2016a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate Sheet and Strip for Pressure Vessels and for General Applications《压力容器和通用应用的铬和铬镍.pdf)为本站会员(deputyduring120)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开