欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    ASME B31G-2012 Manual for Determining the Remaining Strength of Corroded Pipelines《腐蚀管道剩余强度测定手册》.pdf

    • 资源ID:456567       资源大小:288.25KB        全文页数:64页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    ASME B31G-2012 Manual for Determining the Remaining Strength of Corroded Pipelines《腐蚀管道剩余强度测定手册》.pdf

    1、AN AMERICAN NATIONAL STANDARD ASME B31G-2012(Revision of ASME B31G-2009)Manual for Determining the Remaining Strength of Corroded PipelinesSupplement to ASME B31 Code for Pressure PipingASME B31G-2012(Revision of ASME B31G-2009)Manual forDetermining theRemaining Strength ofCorroded PipelinesSuppleme

    2、nt to ASME B31 Code forPressure PipingAN AMERICAN NATIONAL STANDARDThree Park Avenue New York, NY 10016 USADate of Issuance: October 24, 2012The next edition of this Manual is scheduled for publication in 2015.ASME issues written replies to inquiries concerning interpretations of technical aspects o

    3、f this Manual.Periodically certain actions of the ASME B31 Committee may be published as Code Cases. CodeCases and interpretations are published on the ASME Web site under the Committee Pages athttp:/cstools.asme.org/ as they are issued.Errata to codes and standards may be posted on the ASME Web sit

    4、e under the Committee Pages toprovide corrections to incorrectly published items, or to correct typographical or grammatical errorsin codes and standards. Such errata shall be used on the date posted.The Committee Pages can be found at http:/cstools.asme.org/. There is an option available toautomati

    5、cally receive an e-mail notification when errata are posted to a particular code or standard.This option can be found on the appropriate Committee Page after selecting “Errata” in the “PublicationInformation” section.ASME is the registered trademark of The American Society of Mechanical Engineers.Th

    6、is Manual was developed under procedures accredited as meeting the criteria for American National Standards.The Standards Committee that approved the Manual was balanced to assure that individuals from competent andconcerned interests have had an opportunity to participate. The proposed Manual was m

    7、ade available for public reviewand comment that provides an opportunity for additional public input from industry, academia, regulatory agencies,and the public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any positi

    8、on with respect to the validity of any patent rights asserted in connection with anyitems mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability forinfringement of any applicable letters patent, nor assumes any such liability. Users of a code or st

    9、andard are expresslyadvised that determination of the validity of any such patent rights, and the risk of infringement of such rights, isentirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or

    10、industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the establishedASME procedures and policies, which precludes the issuance of interpretations by individuals.No part of this document may be reproduced i

    11、n any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.The American Society of Mechanical EngineersThree Park Avenue, New York, NY 10016-5990Copyright 2012 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedPrinted in U.S.A.CONTE

    12、NTSForeword ivCommittee Roster . vCorrespondence With the B31 Committee viSummary of Changes vii1 Introduction . 12 Evaluation Methods 63 Tables of Allowable Length of Corrosion . 8Figures1.12-1 Corrosion Pit Interaction Distances 51.13-1 Helically Oriented Corrosion Pattern 52.1-1 Corrosion Paramet

    13、ers Used in Analysis 7Tables3-1 Values of L for Pipe Sizes NPS 2 and 20,SFp Sflow(1 d/t)Note that previous editions of B31G incorporated adefinition for flow stress of Sflowp 1.1 H11547 SMYS. Forconsistency in comparison to results obtained from eval-uations performed to an earlier edition, use of t

    14、he samedefinition for flow stress is recommended.(12)ASME B31G-2012Fig. 2.1-1 Corrosion Parameters Used in AnalysisMeasured maximumdepth of corrosionMeasured longitudinal extent of the corroded area, LMLongitudinal axis of pipedReferences: ANSI/ASME B31G-1984 and ASMEB31G-1991.(b) Modified B31G. For

    15、 z 50,M p (1 + 0.6275z 0.003375z2)1/2For z 50,M p 0.032z + 3.3SFp SflowH209001 0.85(d/t)1 0.85(d/t)/MH20901References: (1) Kiefner, J. F., and Vieth, P. H., “ProjectPR3-805: A Modified Criterion for Evaluating theRemaining Strength of Corroded Pipe,” AGA CatalogNo. L51609, Dec. 22, 1989; (2) Kiefner

    16、, J. F., and Vieth,P. H., “New Method Corrects Criterion for EvaluatingCorroded Pipe,” Oil boundary conditions and con-straints; ovality, deformations, misalignments, and dis-continuities; material stressstrain characteristics; andeffects of the flaw on the overall distribution of loadsand stresses.

    17、 A failure criterion should be developedthat considers the strain capacity or fracture resistancecharacteristics of the material. Similar issues should beconsidered in developing a suitable safety factor as weredescribed for a Level 1 or Level 2 analysis.3 TABLES OF ALLOWABLE LENGTH OF CORROSIONThe

    18、following are applicable to Tables 3-1 through3-12M:(a) Metal loss having a maximum depth of 10% ofthe nominal pipe wall thickness or less is not limited asto allowable length.(b) Metal loss having a maximum depth exceeding80% of the nominal pipe wall thickness shall not beevaluated using the tables

    19、 of allowable length.ASME B31G-2012Table 3-1 Values of L for Pipe Sizes NPS 2 and NPS 6Wall Thickness, t, in.Depth,d, in. 0.083 0.109 0.125 0.141 0.154 0.172 0.188 0.2180.01 1.99 No limit No limit No limit No limit No limit No limit No limit0.02 0.92 1.94 2.44 2.59 2.71 2.86 2.99 No limit0.03 0.53 0

    20、.85 1.13 1.51 1.94 2.86 2.99 3.220.04 0.39 0.60 0.75 0.93 1.11 1.40 1.74 2.740.05 0.31 0.47 0.58 0.70 0.82 1.00 1.18 1.620.06 0.25 0.39 0.48 0.58 0.66 0.79 0.92 1.210.07 . . . 0.33 0.41 0.49 0.56 0.67 0.77 0.990.08 . . . 0.28 0.35 0.43 0.49 0.58 0.67 0.840.09 . . . . . . 0.31 0.38 0.43 0.51 0.59 0.7

    21、40.10 . . . . . . 0.27 0.33 0.39 0.46 0.53 0.660.11 . . . . . . . . . 0.30 0.35 0.41 0.48 0.600.12 . . . . . . . . . . . . 0.31 0.38 0.43 0.550.13 . . . . . . . . . . . . . . . 0.34 0.40 0.500.14 . . . . . . . . . . . . . . . . . . 0.37 0.460.15 . . . . . . . . . . . . . . . . . . 0.34 0.430.16 . .

    22、. . . . . . . . . . . . . . . . . . . 0.400.17 . . . . . . . . . . . . . . . . . . . . . 0.37Table 3-1M Values of L for Pipe Sizes 60 mm and 168 mm O.D.Wall Thickness, t,mmDepth,d, mm 2.1 2.8 3.2 3.6 3.9 4.4 4.8 5.50.3 50.5 No limit No limit No limit No limit No limit No limit No limit0.5 23.2 49.1

    23、62.0 65.8 68.8 72.7 76.0 No limit0.8 13.4 21.7 28.7 38.3 49.2 72.7 76.0 81.91.0 9.8 15.1 19.0 23.7 28.1 35.6 44.2 69.51.3 7.8 11.9 14.7 17.9 20.8 25.3 29.9 41.11.5 6.4 9.8 12.1 14.6 16.8 20.1 23.4 30.71.8 . . . 8.3 10.3 12.4 14.3 17.0 19.5 25.02.0 . . . 7.2 9.0 10.8 12.4 14.7 16.9 21.42.3 . . . . .

    24、. 7.9 9.5 11.0 13.0 14.9 18.82.5 . . . . . . 6.9 8.5 9.8 11.6 13.4 16.82.8 . . . . . . . . . 7.6 8.8 10.5 12.1 15.23.0 . . . . . . . . . . . . 8.0 9.6 11.0 13.93.3 . . . . . . . . . . . . . . . 8.7 10.1 12.83.6 . . . . . . . . . . . . . . . . . . 9.3 11.83.8 . . . . . . . . . . . . . . . . . . 8.5 1

    25、0.94.1 . . . . . . . . . . . . . . . . . . . . . 10.24.3 . . . . . . . 9.59(12)(12)(12)ASME B31G-2012Table 3-2 Values of L for Pipe Sizes NPS 6 and NPS 10Wall Thickness, t, in.Depth,d, in. 0.083 0.125 0.156 0.188 0.203 0.219 0.250 0.3120.01 3.32 No limit No limit No limit No limit No limit No limit

    26、No limit0.02 1.53 4.08 4.55 5.00 No limit No limit No limit No limit0.03 0.88 1.89 3.37 5.00 5.20 5.40 5.77 No limit0.04 0.65 1.25 1.90 2.91 3.61 4.65 5.77 6.440.05 0.51 0.97 1.40 1.97 2.30 2.73 3.86 6.440.06 0.42 0.80 1.13 1.54 1.77 2.04 2.67 4.770.07 . . . 0.68 0.96 1.29 1.46 1.66 2.11 3.370.08 .

    27、. . 0.59 0.83 1.11 1.25 1.42 1.77 2.680.09 . . . 0.52 0.74 0.98 1.10 1.24 1.54 2.260.10 . . . 0.46 0.66 0.88 0.99 1.11 1.37 1.970.11 . . . . . . 0.59 0.80 0.90 1.01 1.24 1.760.12 . . . . . . 0.54 0.73 0.82 0.92 1.13 1.600.13 . . . . . . . . . 0.66 0.75 0.85 1.04 1.460.14 . . . . . . . . . 0.61 0.69

    28、0.78 0.96 1.350.15 . . . . . . . . . 0.56 0.64 0.72 0.89 1.260.16 . . . . . . . . . . . . 0.59 0.67 0.83 1.180.17 . . . . . . . . . . . . . . . 0.63 0.78 1.100.18 . . . . . . . . . . . . . . . . . . 0.73 1.040.19 . . . . . . . . . . . . . . . . . . 0.69 0.980.20 . . . . . . . . . . . . . . . . . . 0

    29、.65 0.930.21 . . . . . . . . . . . . . . . . . . . . . 0.880.22 . . . . . . . . . . . . . . . . . . . . . 0.840.23 . . . . . . . . . . . . . . . . . . . . . 0.800.24 . . . . . . . . . . . . . . . . . . . . . 0.7610ASME B31G-2012Table 3-2M Values of L for Pipe Sizes 168 mm and 273 mm O.D.Wall Thickne

    30、ss, t,mmDepth,d, mm 2.1 3.2 4.0 4.8 5.2 5.6 6.4 7.90.3 84.4 No limit No limit No limit No limit No limit No limit No limit0.5 38.8 103.6 115.7 127.0 No limit No limit No limit No limit0.8 22.4 48.0 85.6 127.0 132.0 137.1 146.4 No limit1.0 16.4 31.8 48.1 73.8 91.6 118.1 146.4 163.61.3 13.0 24.6 35.5

    31、50.0 58.5 69.3 98.0 163.61.5 10.7 20.3 28.7 39.1 44.9 51.7 67.8 121.11.8 . . . 17.3 24.3 32.6 37.1 42.2 53.6 85.52.0 . . . 15.0 21.1 28.2 31.9 36.0 45.0 68.12.3 . . . 13.1 18.7 24.9 28.1 31.6 39.1 57.42.5 . . . 11.6 16.7 22.3 25.1 28.3 34.8 50.22.8 . . . . . . 15.0 20.2 22.8 25.6 31.4 44.83.0 . . .

    32、. . . 13.6 18.4 20.8 23.4 28.7 40.63.3 . . . . . . . . . 16.9 19.1 21.5 26.4 37.23.6 . . . . . . . . . 15.5 17.6 19.8 24.4 34.43.8 . . . . . . . . . 14.3 16.3 18.4 22.7 32.04.1 . . . . . . . . . . . . 15.1 17.1 21.2 29.94.3 . . . . . . . . . . . . . . . 15.9 19.8 28.04.6 . . . . . . . . . . . . . .

    33、. . . . 18.6 26.44.8 . . . . . . . . . . . . . . . . . . 17.5 25.05.1 . . . . . . . . . . . . . . . . . . 16.4 23.65.3 . . . . . . . . . . . . . . . . . . . . . 22.45.6 . . . . . . . . . . . . . . . . . . . . . 21.35.8 . . . . . . . . . . . . . . . . . . . . . 20.26.1 . . . . . . . . . . . . . . . .

    34、 . . . . . 19.211(12)ASME B31G-2012Table 3-3 Values of L for Pipe Sizes NPS 10 and NPS 16Wall Thickness, t, in.Depth,d, in. 0.156 0.219 0.250 0.307 0.344 0.365 0.438 0.5000.02 5.80 No limit No limit No limit No limit No limit No limit No limit0.03 4.29 6.87 7.34 No limit No limit No limit No limit N

    35、o limit0.04 2.41 5.92 7.34 8.14 8.62 8.87 No limit No limit0.05 1.78 3.48 4.91 8.14 8.62 8.87 9.72 10.390.06 1.44 2.59 3.40 5.77 8.62 8.87 9.72 10.390.07 1.22 2.11 2.69 4.13 5.53 6.62 9.72 10.390.08 1.06 1.81 2.26 3.30 4.22 4.85 8.37 10.390.09 0.94 1.59 1.96 2.80 3.48 3.93 6.10 9.380.10 0.84 1.42 1.

    36、74 2.45 2.99 3.35 4.92 6.950.11 0.75 1.28 1.57 2.19 2.65 2.94 4.18 5.640.12 0.68 1.17 1.44 1.98 2.39 2.64 3.67 4.810.13 . . . 1.08 1.32 1.82 2.18 2.40 3.29 4.230.14 . . . 1.00 1.22 1.68 2.01 2.21 2.99 3.800.15 . . . 0.92 1.14 1.56 1.86 2.05 2.75 3.460.16 . . . 0.86 1.06 1.46 1.74 1.91 2.55 3.190.17

    37、. . . 0.80 0.99 1.37 1.64 1.79 2.39 2.970.18 . . . . . . 0.93 1.29 1.54 1.69 2.24 2.770.19 . . . . . . 0.88 1.22 1.46 1.60 2.12 2.610.20 . . . . . . 0.82 1.15 1.38 1.51 2.00 2.470.21 . . . . . . . . . 1.09 1.31 1.44 1.90 2.340.22 . . . . . . . . . 1.04 1.25 1.37 1.81 2.230.23 . . . . . . . . . 0.99

    38、1.19 1.30 1.73 2.120.24 . . . . . . . . . 0.94 1.13 1.25 1.66 2.030.25 . . . . . . . . . . . . 1.08 1.19 1.59 1.950.26 . . . . . . . . . . . . 1.03 1.14 1.52 1.870.27 . . . . . . . . . . . . 0.99 1.09 1.46 1.800.28 . . . . . . . . . . . . . . . 1.05 1.41 1.730.29 . . . . . . . . . . . . . . . 1.00 1

    39、.35 1.670.30 . . . . . . . . . . . . . . . . . . 1.31 1.610.31 . . . . . . . . . . . . . . . . . . 1.26 1.550.32 . . . . . . . . . . . . . . . . . . 1.21 1.500.33 . . . . . . . . . . . . . . . . . . 1.17 1.450.34 . . . . . . . . . . . . . . . . . . 1.13 1.410.35 . . . . . . . . . . . . . . . . . . 1

    40、.09 1.360.36 . . . . . . . . . . . . . . . . . . . . . 1.320.37 . . . . . . . . . . . . . . . . . . . . . 1.280.38 . . . . . . . . . . . . . . . . . . . . . 1.240.39 . . . . . . . . . . . . . . . . . . . . . 1.200.40 . . . . . . . . . . . . . . . . . . . . . 1.1612ASME B31G-2012Table 3-3M Values of

    41、L for Pipe Sizes 273 mm and 406 mm O.D.Wall Thickness, t,mmDepth,d, mm 4.0 5.6 6.4 7.8 8.7 9.3 11.1 12.70.5 147.4 No limit No limit No limit No limit No limit No limit No limit0.8 109.1 174.6 186.5 No limit No limit No limit No limit No limit1.0 61.3 150.4 186.5 206.7 218.8 225.4 No limit No limit1.

    42、3 45.2 88.3 124.8 206.7 218.8 225.4 246.9 263.81.5 36.5 65.9 86.4 146.6 218.8 225.4 246.9 263.81.8 30.9 53.7 68.2 104.8 140.5 168.1 246.9 263.82.0 26.9 45.9 57.3 83.9 107.1 123.3 212.7 263.82.3 23.8 40.3 49.8 71.0 88.3 99.8 155.0 238.42.5 21.3 36.0 44.3 62.1 76.0 85.0 124.9 176.52.8 19.2 32.6 40.0 5

    43、5.5 67.3 74.7 106.1 143.33.0 17.3 29.8 36.5 50.4 60.6 67.0 93.1 122.23.3 . . . 27.4 33.6 46.2 55.3 61.0 83.5 107.53.6 . . . 25.3 31.1 42.7 51.0 56.1 76.0 96.53.8 . . . 23.4 28.9 39.7 47.4 52.0 69.9 87.94.1 . . . 21.8 27.0 37.1 44.2 48.5 64.9 81.04.3 . . . 20.3 25.2 34.8 41.5 45.5 60.6 75.34.6 . . .

    44、. . . 23.7 32.8 39.1 42.9 56.9 70.54.8 . . . . . . 22.2 31.0 37.0 40.5 53.7 66.35.1 . . . . . . 20.9 29.3 35.1 38.4 50.9 62.75.3 . . . . . . . . . 27.8 33.3 36.5 48.4 59.45.6 . . . . . . . . . 26.4 31.7 34.8 46.1 56.65.8 . . . . . . . . . 25.1 30.2 33.1 44.0 54.06.1 . . . . . . . . . 23.8 28.8 31.7

    45、42.1 51.66.4 . . . . . . . . . . . . 27.5 30.3 40.3 49.56.6 . . . . . . . . . . . . 26.3 29.0 38.7 47.56.9 . . . . . . . . . . . . 25.1 27.7 37.2 45.77.1 . . . . . . . . . . . . . . . 26.6 35.7 44.07.4 . . . . . . . . . . . . . . . 25.5 34.4 42.47.6 . . . . . . . . . . . . . . . . . . 33.2 40.97.9 .

    46、 . . . . . . . . . . . . . . . . . 32.0 39.58.1 . . . . . . . . . . . . . . . . . . 30.8 38.18.4 . . . . . . . . . . . . . . . . . . 29.7 36.98.6 . . . . . . . . . . . . . . . . . . 28.7 35.78.9 . . . . . . . . . . . . . . . . . . 27.7 34.69.1 . . . . . . . . . . . . . . . . . . . . . 33.59.4 . . .

    47、. . . . . . . . . . . . . . . . . . 32.49.7 . . . . . . . . . . . . . . . . . . . . . 31.49.9 . . . . . . . . . . . . . . . . . . . . . 30.510.2 . . . . . . . . . . . . . . . . . . . . . 29.613(12)ASME B31G-2012Table 3-4 Values of L for Pipe Sizes NPS 16 and NPS 20Wall Thickness, t, in.Depth,d, in.

    48、0.188 0.250 0.312 0.344 0.375 0.438 0.500 0.6250.02 7.77 No limit No limit No limit No limit No limit No limit No limit0.03 7.77 8.96 No limit No limit No limit No limit No limit No limit0.04 4.52 8.96 10.01 10.51 10.97 No limit No limit No limit0.05 3.06 6.00 10.01 10.51 10.97 11.86 12.67 No limit0

    49、.06 2.39 4.15 7.41 10.51 10.97 11.86 12.67 No limit0.07 2.00 3.28 5.23 6.75 8.84 11.86 12.67 14.170.08 1.73 2.75 4.17 5.14 6.34 10.21 12.67 14.170.09 1.52 2.39 3.51 4.24 5.08 7.44 11.45 14.170.10 1.37 2.13 3.07 3.65 4.30 6.00 8.48 14.170.11 1.24 1.92 2.74 3.23 3.77 5.10 6.88 13.850.12 1.13 1.75 2.48 2.91 3.37 4.47 5.87 10.530.13 1.03 1.61 2.27 2.66 3.06 4.01 5.16 8.650.14 0.95 1.49 2.10 2.45 2.81 3.65 4.63 7.430.15 0.87 1.39 1.96 2.28 2.61 3.36 4.22 6.560.16 . . . 1.30 1.83 2.13 2.43 3.12 3.89 5.910.17 . . . 1.21 1.72 1.99 2.28 2.91 3.62 5.400.18 . . . 1.1


    注意事项

    本文(ASME B31G-2012 Manual for Determining the Remaining Strength of Corroded Pipelines《腐蚀管道剩余强度测定手册》.pdf)为本站会员(Iclinic170)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开