1、I INCH-POUND I MIL-T-63279 (AR) AMENDMENT 1 04 November 1993 MILITARY SPECIFICATION TEST SET, ELECTRONIC SYSTEMS: M92; REPAIR PARTS FOR This amendment forms a part of Military Specification MIL-T-63279 (AR), dated 12 March 1979, and is approved for use by the US Army Armament, Munitions and Chemical
2、 Command and is available for use by all Departments and Agencies of the Department of Defense. PAGE 1 2.1 SPECIFICATIONS, MILITARY: Delete reference to MIL-A-48078 and MIL-T-63264 in their entirety STANDARDS, MILITARY: Delete reference to MIL-STD-i460 and MIL-STD-454 in their entirety and substitut
3、e O “DOD-STD-2000-1 - DOD-STD-2000-2 - DOD-STD-2000-3 - DOD-STD-2000-4 - Solder i ng Technology, High Quality/High Reliability. Part and Component Mounting for High Quality/High Reliability Soldering Electrical and Electronic Assemblies. Criteria for High Quality/High Reliability Soldering Technolog
4、y. General Purpose Soldering Require- ments for Electrical and Electronic Equipment.“ PAGE 3 3.3 Wiring and soldering: Delete “with MIL-STD-1460 or MIL-STD-454“ and substitute with “DOD-STD-2000“. 4.1: Delete “MIL-A-48078“ and substitute “MIL-W-63150“. AMSC N/A 1 of 3 FSC 4925 DISTRIBUTION STATEMENT
5、 A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-63279 (AR) AMENDMENT 1 4.4.1 Inspection lot formation: Delete in its entirety and substitute “Not applicable“. 4.4.2 Examination: Delete
6、 “MIL-A-48078“. PAGE 23 4.4.4 Inspection equipment: Delete “Section 6 of MIL-A-48078 and substitute “Section 3.6.6 of MIL-W-63150“. 5.0 PREPARATION FOR DELIVERY: Delete in its entirety and substitute the following: “5.0 PREPARATION FOR DELIVERY 5.1 Packaging. 5.1.1 Level A. Packaging for the followi
7、ng items shall be P in accordance with indicated packaging drawings. NOMENCLATURE Relay Indicator Knob Rotary Switch (S4) cable Assembly, Power Cable No. 1 Cable Assembly, Power Cable No. 2 Cable Assembly, Test Cable No. 1 Cable Assembly, Test Cable No. 2 Cable Assembly, Test Cable No. 3 Stud Nut Ca
8、se, Carrying Rod Flare Simulator Assembly Relay (K2) Test Set, Electric Assembly, M92 Dispenser Test Adapter Assembly Transistor (Qi) Voltage Regulator (VR1) Voltage comparator (vi) PART # PKG DWG 9219846 9310970 9321211 9325989 9325990 9 3 2 5 9 9 1 9325992 9325993 9325999 9326021 9326111 9326117 9
9、326195 9326202 9326211 9326731 9326733 9326787 11829026 11829051 9326153 11828996 11829046 11829028 11829045 11829036 11829047 11829012 11829048 11829039 11829025 11829052 11829031 11829022 11829005 11829024 Components that are not packaged in accordance with packaging drawings shall be packaged in
10、accordance with the applicable special packaging instruction (SPI). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-63279 (AR) AMENDMENT 1 5.1.2 Level B. Packaging shall be the same as stated in para. 5.1.1 5.1.3 Commercial. Packaging shail b
11、e as indicated in ASTM-D-3951 except the unit pack quantity shall be one (1). 5.2 Marking. 5.2.1 Level A. Marking shall be in accordance with applicable packaging drawing or special packaging instructions. 5.2.2 Level B. Marking shall be as specified in para. 5.2.1. 5.2.3 Commercial. Mark in accorda
12、nce with ASTM-D-3951.“ 6.1 Ordering data: Delete “MIL-A-48078“ and substitute “MIL-W-63150“. 6.2 Submission of inspection equipment designs for approval: Delete “MIL-A-48078“ and substitute “MI-W-63150“. Delete “U.S. Army Armament Research and Development Command“ and substitute “U.S. Army ARDEC, ATTN: SMCAR-QAT-I, Picatinny Arsenal, NJ 07806-5000“. Custodian: Army-AR Preparing activity: Army-AR (Project 4925-054) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
