1、- MIL-F-51376 (1) 13 7777706 033qOOb T H s-37-/9 MIL-F-51376( EA) AMENDMENT 1 3 April 1987 MiLITARY SPECIFICATION PUZE, HAND GRENADES, 227 This amendment forms a part of MIL-F-51376(EA) , dated 15 November 1974, and is approved for use within the . Chemical Research, Development and Engineering Cent
2、er , Department of the Amy and is available for use by all Departments and Agencies of the Department of Defense. PAGE 1 2.1 , Under “SPECIFICATIONSff “FEDERAL“ add “QQ-A-591 - Alu-ninum Alloy Die Castings. PAGE 2 2.1, Add a new.section after list of drawings as follows: “PUBLICATIONS U. S. ARMY CHE
3、MICAL RESEARCH , DEVELOPMENT AND ENGINEERING CENTER INSPECTION STANDARD _ - R14-17 - Chemical Systems Laborato$ Standard for Soundness of Aluminum Die Castinzs .I Add a new paragraph after 3.1.2 as follows: “3.1.3 Castings. Fuze body die castings (Drawing 13-10-41) shall conform to Inspection Standa
4、rd R14-17.“ 3.3(b): Delete “force of 1.5 to“ and substitute “force of 1.9 to“. PAGE 4 Add a nw paragraph after 4.3.1 as follows: “4.3.1.1 Components. Prior to asombly of the preproduction lot , samples of each com2onent shall be selected for exaninstion.“ ISC N/A FSC i330 DISTRIBUTION STATEMENT A. A
5、pproved for- public release; distribution is unlimited. Pa-ge 1 of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-51376 (EA) AMENDbBNT 1 4.3.2.1: Delete this paragraph is its entirety and substitute the following: “4 . 3 . 2.1 For examinat i
6、on. (a) Fuzes. Sampling shall be conducted in accordance with MIL- STD-105. (b) Components. Five OP eilch component sha1.I be randomly selected.“ Add a new paragraph after 4.3,2.2 as follows: “4.3.2.3 For casting soundness. Sarflgling shall be conducted in accordance with QQ-A-591 .Ir 4.3.3.1: Delet
7、e this paragraph in its entirety and substitute the foLLowing: “4.3.3.1 For examinat ion. (a) Fuzes. The sample fuzes shall be examined in accordance with the classification of defects and with PUL-STD-lO5. A4Ls do not apply. (b) Components. The sample components shall be examined 100 percen-t; for
8、all drawing requirements. k2Ls do not apply.“ Add a new pwagragh after 4.3.3e2 as tolloys: “4.3.3.3 For casting soundness. Sanple-castings shall be inspected in accordance with Inspection Standard R14-17.“ - PAGE 5 Add a new pragraph after 4.4.2.2 as follows: (4.4.2.3 For casting soundness. Sampling
9、 shall be conducted in accordance with QQ-A-591.“ Renumber paragraph 4.4.3.3 to 4.4.3.4 and add a new paragraph 4.4.3.3 as follows : ii4.4.3.3 For casting soundness. The sample castiws shall be inspected in accordance with Inspection Standard Rib-17.“ PAGE 6 Renumbex. paragraph 4.4.3.4 to 4.4.3.5. 2
10、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.- MIL-F-51376 (1) 13 m 7777906 0334008 3 m MIL-F-5 1376( EA) AMENDMENT 1 PAGE 8 Add a new paragraph to the end of section 6 as follows: “6.5 International interest. Certain provisions of this specific
11、ation are the subject of international standardization qreement ABCA - Army Quadripar- tite Standardization Agreement - 319. Ifhen amendment, revision, or cancella- tion or. this specification is proposed which will modify the international asreement concerned, the pregering activity will take appro
12、priate action through international standardization channels including departmental stan- dardization offices to change the agreement or malre other appropriate accorn- modat ions . I Custodian: Army - EA Preparing activity: . Army - EA Proj ect No. 1330-A309 -. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
