1、MIL-F-51069B (MU) i September i967 MILITARY SPECIFICATION FILTER UNIT, GAS-PARTICULATE, FOUR MAN, 12 CFM, M8A3 This specification is approved for use by US Army Armament Research and Development Command, Department of the Army, and is available for use by all Depart- ments and-Agencies of the Depart
2、ment of Defense. . -=e- = 1. SCOPE 1.1 2, APPLICABLE DOCUMENTS 2.1 Issues of documents. This specification covers a gas-particulate filter unit. The following documents, of the issue in ef- fect on date of invitation for bids, or request for proposal, form a part of this specification to the extent
3、specified herein, SPECIFICATIONS FEDERAL QQ-S-781 - Strapping, Steel, and Seals. PPP-B- - Boxes, Wood, Nailed and Lock-Corner. PPP-13-636 - Boxes, Shipping, Fiberboard, PPP-T-76 - Tape, Pressure-Sensitive Adhesive, Paper. FSC 4240 : Beneficial comments (recommendations, additions, delet-ons) and any
4、 . : pertinent data which may be of use in improving %his document should be : addressed to: : Command, Attn: : the self-addressed Standardization Document Improvement Proposal (DD : Form 1426) appearing at the end of this document or by letter. : 21010 by using : Commaner, US Army Armament Research
5、 and Development v DRDAR-TGC-S, Aberdeen Proving Ground, MD . , THIS DOCUMENT CONTAINS PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-SLObSC Y2 9999906 023Y352 O MILITARY MIL-P-116 - Preservat ion-Packaging, Methods of . MIL-B-121 - Bar
6、rier Material, Greaseproofed, Waterproofed, MIL-1-51072 - Installation Kit, Gas-Particulate Filter Unit, Flexible . Armored Vehicle , M20A1 . STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes. MIL-STD-129 - Marking for Shipment and Storage. MIL-STD-1188 - C
7、ommercial Packaging of Supplies and Equipment. DRAWINGS AND TECHNICAL DATA PACKAGE LIST (TDPL) US ARMY ARMAMENT RESEARCH AND DEVELOPMENT CO!4MAND CHESIICAL SYSTEMS LABORATORY TDPL 5-19-1779 - Filter Unit , Gas-Particulate, Four-Man, 12 CFM, M8A3. (Copies of specifications, standards , drawings, and
8、publications re- quired by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the con- tracting officer. ) 3. REQUIRWNTS 3.1 Materials and components. 3.1.3. Materials, Al1 materials cited on TDPL 5-19-1779 or on the sub- si
9、diary drawings shall conform to the specifications listed thereon, or to the specific characteristics set forth on the drawings. 3.1.2 Components. All components of the filter unit shall conform to the specifications and drawings listed on TDPL 5-19-1779 and subsidiary drawings . 3.2 Workmanship. Th
10、e filter unit shall be free of damage such as bent, chipped, or burred metal parts and cracked, kinked, or torn rubber parts, and foreign matter (dirt, grease, oil, or viscous material). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3 Provided by
11、 IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5-2.2 Level B. The components of the kit, unit packed as specified in 5.1.2, shall be packed in a PPP-B- fiberboard
12、 box, style RSC, grade VC, size 15 inches by i5 inches by 15-3/4 inches inside dimen- sions. Closure shall be in accordance with PPP=B-636, appendix. 5.2.3 Commercial. Commercial packing shall be in accordance with MIL- STD-i188 , 5.3 Marking (level A, B or commercial) (see 6.22, 5.3.1 Levels A and
13、B, In addition to any special markings required by the contract or order, unit packages, intermediate packages, and shipping containers shall be marked in accordance with MIL-STD-129, shall be provided as specified in MIL-STD-129. A packing list 5.3.2 Commercial, Commercial marking shall be in accor
14、dance with MIL- STD-1188. 6. NOTES 6,i Intended use, The filter unit covered by this specification is intended to remove toxic aerosols and gases from air supplied to crews of military vehicles (tanks, personnel carriers , etc) , 6-2 Ordering data, Procurement documents should specify the following:
15、 (a) (b) Level of packing required. (c) Level of marking required, Title, number, and date of this specification, 6,3 Component specifications, The component specifications for the M8A3 Filter Unit are as follows: Humber - Title - Filter, Gas, 12 CFM, lr112A1 Filter, Particulate, 12 CFflI, ti3 Hose:
16、 For Filter Units Installation Kit, Gas-Particulate Filter Centrifugal Fan and Motor, Assembly, Precleaner, Air Purifier, blAl Purifier, Air, M2A2 Separator, Dust Coupling, Half, Quick Disconnect Unit, Amored Vehicle, M20Al 12 cm.1 MIL-F-14 512 MIL-F-52011 MIL-H-14506 MIL-1-51072 MIL-C-5 o084 MIL-P-
17、5 O08 5 MIL-P-51 O7 O MIL-S-50087 MIL-C-51073 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Preparing activity: Amy - EA Project No. 4240-A513 * US. GOVERNMENT PRINTING OFFICE: 1079-603-022/1020 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
