1、.flIL-F-2071D (2) 83 999770b 037275b L a p-83 -c MIL-F-20 71D AMENDMENT 2 29 March 1985 SUPERSEDING INT AMENDMENT 1 17 August 1984 I MILITARY SPECIFICATION FLAG, NATIONAL, UNITED STATES OF AMERICA, GRAVE DECORATING, PRINT CLOTH This amendment forms a part of Military Specification MIL-F-2071D, dated
2、. 30 September 1976, and is approved for use by all Departments and Agencies of the Department of Defense. Page 1 Para. 2.1 - Issues of documents under: SPECIFICATIONS, FEDERAL. Delete second line and substitute the following: “m-L-736 - Lumber, Hardwood.“ Page 2 Para, substitute the following: 2.2
3、- Other publication - Delete everything after the 4th line and “The Color Association of the United States, The Standard Color Reference of America, 10th Edition. (Copies of the Color Reference and individual color standards can be obtained by application to THE COLOR ASSOCIATION OF THE UNITED STATE
4、S, INC. 24 East 38th Street, New York, N.Y. 10016.)“ Page 3 Delete paragraph 3.3.1.2 in its entirety and substitute the following: 3.3.1.2 Color. - The printed cotton flag material colors shall conform to I1 The Standard Color Reference of America. (see 2.2) /FSC 8345/ 1 of 2 T THIS DOCUMENT CONTAIN
5、S PAGES Licensed by Information Handling Services-. MIL-F-207LD (2) 83 m 7777706 0372757 3 m MIL-F-2071D AMENDMENT 2 Page 3 Delete paragraph 3.4 in its entirety and substitute the following: “3.4 Design. - The design of the flag shall be as shown in Figure 1 and a replica of the United States of Ame
6、rica National Flag. finished flag shall be 7 inches 2 1 inch in the hoist direction and 11 inches f 1 inch in the fly direction. field shall be 3-3/4 inches by 5-1/4 inches & 1/2 inch in either direction. Stars shall be 1/2 inch f 1/16 inch in diameter and shall be equally spaced as shown in Figure
7、1. or Star field in the hoist direction. All measurements are to be made on the face side of the flag, which is the side nearest the observer when the flag is held with the canton or star field in the upper left hand corner. (Note: Specification Flag.)“ The size of the The size of the canton or star
8、 Stripes shall be approximately 1/7 of the canton Disregard all dimensions and notes in Figure 1 pertaining to Page 7 Para. type III of PPP-T-45.“ 5.101 - Level A, - At the end of third sentence delete “conforming to CUSTODIANS: REVIEW ACTIVITIES: USER ACTIVITIES: PREPARING ACTIVITY: ARMY IH AIR FORCE 99 NAVY Nu- DLA Project No. 8345 - 0125 11-,82 45 Nu MC CT THE INSTITUTE OF HERALDRY, UNITED STATES ARMY /FSC 8345/ 2 of 2 Licensed by Information Handling Services
