1、 AMSC N/A Page 1 of 4 FSC 8455 INCH - POUND MIL-DTL-3943/354 31 October 2012 DETAIL SPECIFICATION SHEET DECORATION, CROSS, U.S. COAST GUARD This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein
2、 shall consist of this specification sheet and the latest issue of MIL-DTL-3943. OBVERSE REVERSE DASH NUMBER: -1 Regular Size Pendant -2 Miniature Size Pendant MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy No. C-230) All Shaded areas to be pierced for -1 and -2 Provided by IHSNot for ResaleNo rep
3、roduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/354 Page 2 of 4 DIMENSIONS: HEIGHT (including integral suspension ring): -1: 2-1/4 inches -2: 1-1/8 inches WIDTH: -1: 1-3/4 inches -2: 7/8 inch THICKNESS (at center): -1: 0.188 inch 0.010 inch -2: 0.160 inch 0.010 inch PIERC
4、INGS: Piercings for -1 and -2 shall be as indicated above. FINISH (-1 and -2): 24K Gold Plated, Matte Finish, Polished Highlights, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. EPOXY (-1 and -2, Obverse only): Epoxy shall be applied to the center insignia as specified
5、below, and shall match TIOH Hard Enamel Color Chip Numbers listed below. Hard cloisonn enamel may be used in lieu of epoxy. If hard cloisonn enamel is used, the required base material shall be Gilding Metal 95/5 (UNS Alloy C-210). TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATION(S) Red #1 -1 and -2 (Obve
6、rse): Alternating stripes of shield, as shown: All dark stripes Shall be epoxied Red #1 Transparent Green #11 -1 and -2 (Obverse): All Leaves of Wreath Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/354 Page 3 of 4 Blue #20 -1 and -2 (O
7、bverse): Chief of shield, as shown: White #28 -1 and -2 (Obverse): Alternating stripes of shield, as shown: DECORATION SET AND CASE: Decoration set shall consist of a regular size medal, a miniature size medal, a lapel button, and a service ribbon, and shall be arranged in accordance with MIL-C-1463
8、3 in a Type XVIII, Style 7 case with a Class 2 pad. The decoration name shall be written on the case as such: on Line 1 the words “COAST GUARD” and on Line 2 the word “CROSS”. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished obverse hub or die. 2. For both -1 a
9、nd -2, the manufacturer may deviate from MIL-DTL-3943 by using nickel underplating prior to plating with 24K gold. 3. The specification slash sheet for the ribbon for the pendant drape and service ribbon is MIL-DTL-11589/641. 4. The specification slash sheet for the lapel button is MIL-DTL-11484/351
10、. 5. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the U.S. Coast Guard. Entire shaded area shall be epoxied Blue #20 All white stripes shall be epoxied White #28 Provided by IHSNot for ResaleNo reproduction or networking pe
11、rmitted without license from IHS-,-,-MIL-DTL-3943/354 Page 4 of 4 Custodians: Preparing activity: Army - IH Army - IH Navy - CG1 (Project No. 8455-2012-152) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
