1、 AMSC N/A FSC 8455 DETAIL SPECIFICATION SHEET MEDAL, ARMED FORCES SERVICE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of
2、 MIL-DTL-3943. OBVERSE REVERSE DASH NUMBERS: -1 Regular Size -2 Miniature Size MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy C-23000) FINISH (-1 and -2): Brass, Oxidized, Buffed Relieved, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip #4. INCH-POUND MIL-DTL-3943/251A 6 July 20
3、11 SUPERSEDING MIL-DTL-3943/251 30 June 1997 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/251A Page 2 of 2 DIMENSIONS: DIAMETER: -1: 1-1/4 inches (REF) -2: 5/8 inch (REF) HEIGHT (including lug): -1: 1-3/8 inches (REF) -2: 45/64 inch (
4、REF) THICKNESS (at thickest point): -1: 0.158 inch 0.010 inch -2: 0.108 inch 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The ribbon for the pendant drape and service ribbon shall conform to MIL-DTL-11589/467. CHANGES FROM PREVIOUS
5、 ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 Navy - NU Review activities: (Project No. 8455-2011-019) Navy - MC, CG1 DLA - CT NOTE:
6、The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-