1、 AMSC N/A Page 1 of 4 FSC 8455 INCH-POUND MIL-DTL-11589/83F 11 October 2012 SUPERSEDING MIL-DTL-11589/83E 15 September 1995 DETAIL SPECIFICATION SHEET RIBBON, MEDAL OF HONOR This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acqui
2、ring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11589. COLOR PATTERN SIZE: Regular (1/) FINISH: Moir TOTAL WIDTH WIDTH OF STRIPES FUNCTION OF STRIPES COLOR 7/64 inch (2.8 mm) between stars (center to center) and 17/64 inch (6.7 mm) between
3、groups, star center to star center. (See star layout) ROSETTE CUP RIBBON: The ribbon for covering the outside of the rosette cup shall be solid Bluebird HR 67117. The ribbon shall be woven 1/2 inch (12.7 mm) wide, with 172 warp ends. Provided by IHSNot for ResaleNo reproduction or networking permitt
4、ed without license from IHS-,-,-MIL-DTL-11589/83F Page 3 of 4 COLOR PATTERN SIZE: Shield Ribbon (3/) FINISH: Moir TOTAL WIDTH WIDTH OF STRIPES FUNCTION OF STRIPES COLOR & CABLE NUMBER INCHES METRIC STRIPES FILLING YARN 1/32 0.8 mm Edge & Binder Bluebird HR 67117 2” 1-15/16 49.2 mm Ground Bluebird HR
5、 67117 Bluebird (50.8mm) Stars White HA 67101 HR 67117 1/32 0.8 mm Edge & Binder Bluebird HR 67117 PHYSICAL REQUIREMENT OF THE FINISHED RIBBON: Total Warp Ends (Minimum): 564 Picks per Inch: 80 (1 thread double shot) Weight per Linear Yard (Minimum): 0.30 ounces (8.5 g) Linear Breaking Strength Full
6、 Width (Minimum): 100 pounds (45.4 kg) Denier of Yarn: Warp (Ply): 50/2 Filling (Ply): Ground: 100/3 Stars: 150/2 3/ SHIELD RIBBON: The 2 inch (50.8 mm) shield ribbon shall be woven with 13 stars in a group. The groups shall be 3 inches (76.2 mm) apart centered on ribbon width with a cutting mark ce
7、ntered half way between each group. The stars shall be 5/32 inch (4.0 mm) in diameter and shall form a triple chevron of 5, 5, and 3 white stars at right angles to the warp direction of the ribbon. (See star layout) Provided by IHSNot for ResaleNo reproduction or networking permitted without license
8、 from IHS-,-,-MIL-DTL-11589/83F Page 4 of 4 COLOR PATTERN SIZE: Neck Ribbon (4/) FINISH: Moir TOTAL WIDTH WIDTH OF STRIPES FUNCTION OF STRIPES COLOR & CABLE NUMBER INCHES METRIC STRIPES FILLING YARN 1/32 0.8 mm Edge & Binder Bluebird HR 67117 1-3/8” 1-5/16 33.4 mm Ground Bluebird HR 67117 Bluebird (
9、35.0 mm) 1/32 0.8 mm Edge & Binder Bluebird HR 67117 HR 67117 PHYSICAL REQUIREMENT OF THE FINISHED RIBBON: Total Warp Ends (Minimum): 420 Picks per Inch: 80 (1 thread double shot) Weight per Linear Yard (Minimum): 0.25 ounces (7.09 g) Linear Breaking Strength Full Width (Minimum): 90 pounds (40.9 kg
10、) Denier of Yarn: Warp (Ply): 50/2 Filling (Ply): Ground: 100/3 4/ NECK RIBBON: The 1-3/8 inch (35.0 mm) neck ribbon shall be solid Bluebird HR 67117 without any white stars. NOTE: This item is not authorized for commercial sale, and may be produced only under Government contract. CHANGES FROM PREVI
11、OUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 Navy - NU (Project No. 8455-2012-017) Review activities: Navy MC, CG1 DLA CT NOTE: T
12、he activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the SSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
