1、A-A-52542 = 9999974 O170023 871 H A-A-52542 w SUPERSEDING MS53035A 5 November I963 COMMERCIAL ITEM DESCRIPTION FIFTH WHEEL ASSEMBLY-33 INCH NON-UNIVERSAL, DOLLY TRAILER CONVERTER, 19000 LBS. CAPACITY The General Services Administration has authorized the use of this Commercial Item Description (CID)
2、 for all federal agencies. 1. s_copE. This CID covers requirements for a dolly mounted fifth wheel assembly used as a trailer converter. 2. -CTEBISTTCS. 2.1 Material. The materials shall be in accordance with the manufacturers material specifications for fifth wheels. The use of recovered material m
3、ade in compliance with regulatory requirements is acceptable providing that all requirements of this CID are met (see 5.4). 2.2 accordance with figure 1. . The fifth wheel assembly shall be designed and constructed in Beneficial comments, recommendations, additions, deletions clarifications, etc. an
4、d any other data which may improve this document should be sent by letter to: U.S. Army Tank-automotive and Armaments Command, ATTN AMSTA-TR-EBLUE, Warren, MI 48397-5000. FSC 2510 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reprod
5、uction or networking permitted without license from IHS-,-,-A-A-52542 9999974 0170024 708 I I. NOTES: 1. Fifth wheel assembly requires use of 2 inch kingpin as shown in A-A-52478. 2. Dimensions are in inches. Unless otherwise specified, tolerances are f .06. 3. This CID is not intended to limit cons
6、truction to features other than specified herein, by dimensions, notations, or referenced documents. 4. The use of asterisks (*) indicates that dimensions are covered by international agreement (see 5.5). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS
7、-,-,-A-A-52542 * . Identification and markings of the fifth wheel assemblies shall . 2.3 be permanent and legible and shall include, as a minimum, the manufacturers identification code (CAGE), the manufacturers part number, and the part identification number (PIN) AA52542-1 (see 5.2). . 3.1 inspecti
8、ons (examinations and tests). . The contractor is responsible for the performance of all 3.2 that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producers own drawings, specifications, workmanship standards, and quality
9、assurance practices. Items with known defects shall not be submited for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. - . The contractor s
10、hall certify and maintain substantiating evidence 4. PRESERVATION.GPACKMCr, T.AqF.TJNG, -. Preservation, packaging, packing, labeling, and marking for the desired level shall be as specified in the contract (see 5.2). 5. NOTES. (This section contains information of a general or explanatory nature th
11、at may be helpful, but is not mandatory.) 5.1 Ac&esesforn. 5.1.1 Crovernment. Copies of A-A-52478 “Kingpin, Fifth Wheel 2 Inch” are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11-5094. 5.2 lhkhghh . Acquisition documents must specify
12、the following: a. Title, number, and date of this CID. b. Issue of the DODISS to be cited in the solicitation. c. PIN number and quantity of fifth wheel assemblies required. d. Selection of applicable level and packaging requirements. 3 Provided by IHSNot for ResaleNo reproduction or networking perm
13、itted without license from IHS-,-,-A-A-52542 5.3 substitutable with fifth wheel assemblies conforming to MS53035A. . Fifth wheel assemblies conforming to this CID are interchangeable/ 5.4 Begulatoryrem . The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94
14、-580 to the maximum extent practicable. 5.5 fi . Certain provisions of this CID (see figure 1) are the subject of international standardization agreement QSTAG 284 and NATO-STANAG 4009. When amendment, revision, or cancellation of this CID is proposed that will modify the international agreement con
15、cerned, the preparing activity will take appropriate action through international channels, including departmental standardization off ices, to change the agreement or make other appropriate accommodations. MILITARY INTERESTS: Custodians: Army - AT Navy - MC Air Force - 99 CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTIVITY: Army - AT (Project 25 10-0 132) Review activities: Air Force - 84 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
