1、 A-A-501 73 October 5, 1988 COMMERCIAL ITEM DESCRIPTION CANDLE BURNER The General Services Administration has authorized the use of this commercial item description in preference to item 1 of MIL-C-43467. 1 SALIENT CHARACTERISTI CS 1,l Design and construction. The candle burner shall be fabricated o
2、f commercial brass with a chromium plate finish. The candle burner shall be cylindrical in design, and be tapered at the top. The burner shall approximate 1-1/2 inches high and the base diameter will be 1-1/4 inches. The top opening of the burner should approximate 13/16 inch in order to accomodate
3、a 15/16 inch diameter candle. 2. QUALITY ASSURANCE 2.1 Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. When specific qual
4、ity assurance provisions are specified for any commercial characteristic the contractor shall furnish data resulting from inspection conducted in accordance with the specific quality assurance provisions. The Government reserves the right to require proof of such conformance prior to first delivery
5、and thereafter as may be otherwise provided for under the provisions of the contract. 3. Packaging Requirements 3.1 Packaging. Each candle burner shall be completely wrapped in tissue paper with the ends tucked inside or enclosed in a clear polyethylene bag. Twelve candle burners shall then be place
6、d into a snug-fitting top loading paperboard box equipped with separators. 3.2 Packing. One shall be packed in style RSC type CF hundred and forty-four candle burners, packed as specified, a snug-fitting fiberboard shipping container conforming to (variety SW) or SF, class domestic, grade 275 of PPP
7、-B-636. and of a size that can be palletized in accordance with MIL-STD-147. shipping container shall be closed in accordance with the appendix of The shipping container shall be completely filled with no voids, Each PPP-B-636 AMSC N/A FSC 9925 DISTRl3TIN STATEMENT A. Approved for public release; di
8、stribution is unlimited. THIS DOCUMENT CONTAINS 2 PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ -_ - - A-A-50173 77 7777774 0047233 9 W A-A-501 73 3.3 Palletization. When specified (see 4.21, candle burners, packaged as specified, shall be
9、 palletized on a 4-way entry pallet in accordance with load type la of MIL-STD-147. or O or P, in accordance with MIL-STD-147. Each prepared load shall be bonded by means K and L 3.4 Marking. purchase order, unit packs, intermediate packs, shipping containers and unitized pallet loads shall be marke
10、d in accordance with MILSTD-129. In addition to any special markings required by the contract or 4. NOTES 4.1 be used with 15/16 inch diameter candles to prevent dripping of wax. Intended use. The candle burner covered by this document is intended to 4.2 Ordering data. a. Title, number, and date of
11、this document. b. When palletization is required (see 3.3). 4.3 Source of government documents. are available from: Copies of military and Federal documents Naval Publications and Forms Center 5801 Tabor Avenue Philadelphia, PA 191 20 MILITARY INTERESTS : CIVIL AGENCY COORDINATING ACTIVITY: Custodians : Army - GL Navy - PE GSA - FSS Preparing A ct i vi ty : Air Force - 28 Army - GL Review Activities: Navy - PE Air Force - 28 Armed Forces Chaplains Board 2 PROJECT NO, 9925-1012 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
