1、 TIA-41.651-E-1E (Addendum to TIA-41.651-E) August 2012Mobile Application Part (MAP)- Voice Features ANSI/TIA-41.651-E-1E-2012 APPROVED: AUGUST 2, 2012 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufactur
2、ers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or no
3、n-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by
4、TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safe
5、ty problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. SP-3-3590.651-RV5-A
6、D1-E-A, formulated under the cognizance of the TIA TR-45 Mobile and Personal Communications Systems Standards, TR-45.8 Subcommittee on Core Networks- Mobile and Personal Communications Standards). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Bo
7、ulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All
8、 rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document,
9、 please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance tha
10、t the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual p
11、roperty rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder there
12、of is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead lef
13、t to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its conte
14、nts. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference cons
15、ists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of e
16、ncouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of
17、 Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL W
18、ARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. T
19、IA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN
20、THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
21、 (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUND
22、AMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. REVISION HISTORYRevision Date RemarksX.S0004-651-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-651-E v2.012345678910111213141516171819202
23、1222324252627282930313233343536373839404142434445464748495051525354555657585960651 -1 Call Delivery (CD)PART 651VOICE FEATURE PROCEDURESThis section describes modular procedures to implement individual features.1 CALL DELIVERY (CD)1.1 HLR CD ActivationUpon request, the HLR shall do the following:1 I
24、F CD is authorized:1-1 Activate CD.1-2 Optionally, include the AnnouncementCode parameter in the AnnouncementList parameter set to an appropriate announcement.1-3 Include the FeatureResult parameter set to Successful to indicate successful feature operation.2ELSE:2-1 Optionally, include the Announce
25、mentCode parameter in the AnnouncementList parameter set to an appropriate announcement.2-2 Include the FeatureResult parameter set to Unsuccessful to indicate unsuccessful feature operation.3 ENDIF.4 Set PointOfReturn to ToneTermination.5 Return to calling task via the PointOfReturn.X.S0004-651-E v
26、2.0HLR CD De-Activation123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960651 -21.2 HLR CD De-ActivationUpon request, the HLR shall do the following:1 IF CD is authorized:1-1 De-activate CD.1-2 Optionally, include the AnnouncementCode param
27、eter in the AnnouncementList parameter set to an appropriate announcement.1-3 Include the FeatureResult parameter set to Successful to indicate successful feature operation.2ELSE:2-1 Optionally, include the AnnouncementCode parameter in the AnnouncementList parameter set to an appropriate announceme
28、nt.2-2 Include the FeatureResult parameter set to Unsuccessful to indicate unsuccessful feature operation.3 ENDIF.4 Set PointOfReturn to ToneTermination.5 Return to calling task via the PointOfReturn.X.S0004-651-E v2.01234567891011121314151617181920212223242526272829303132333435363738394041424344454
29、64748495051525354555657585960651 -3 HLR CD Incoming Call Invocation1.3 HLR CD Incoming Call InvocationWhen the HLR determines the need for CD incoming call routing, it shall perform the followingtasks:1 IF the addressed MS is at home or CD is active and the MS is roaming:1-1 IF the addressed MS is r
30、egistered and active:1-1-1 (Load the parameters for the called MS and common parameters outside the TerminationList parameter.)1-1-2 Include the ElectronicSerialNumber to identify the called MS.1-1-3 Include the MSID to identify the called MS.1-1-4 IF the preferred interexchange carrier is applicabl
31、e for the call:1-1-4-1 Include the Digits (Carrier) parameter.1-1-5 ENDIF.1-1-6 IF an account code is applicable for the call:1-1-6-1 Include the DMH_AccountCodeDigits parameter.1-1-7 ENDIF.1-1-8 IF an alternate billing number is applicable for the call:1-1-8-1 Include the DMH_AlternateBillingDigits
32、 parameter.1-1-9 ENDIF.1-1-10 IF a billing number is applicable for the call:1-1-10-1 Include the DMH_BillingDigits parameter.1-1-11 ENDIF.1-1-12 IF a called mobile directory number is applicable for the call:1-1-12-1 Include the MobileDirectoryNumber parameter.1-1-13 ENDIF.1-1-14 IF custom no answe
33、r timing is applicable for the call:1-1-14-1 Include the NoAnswerTime parameter.1-1-15 ENDIF.1-1-16 IF special features are applicable to the called party for the incoming call:1-1-16-1 Include the OneTimeFeatureIndicator parameter.1-1-17 ENDIF.1-1-18 IF special routing is applicable for the incomin
34、g call:1-1-18-1 Include the RoutingDigits parameter.1-1-19 ENDIF.1-1-20 IF triggers should be set for the terminating party at the originating switch for the incoming call:1-1-20-1 Include the TerminationTriggers parameter.1-1-21 ENDIF.1-1-22 IF the MS is served by the requesting system:1-1-22-1 Inc
35、lude the DMH_RedirectionIndicator parameter set to CD local.X.S0004-651-E v2.0HLR CD Incoming Call Invocation123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960651 -41-1-22-2 Optionally, include the AnnouncementCode parameter in the Announc
36、ementList parameter set to an appropriate announcement.1-1-22-3 IF the requesting MSC is capable of at least one MultipleTerminations according to the TransactionCapability received with the LocationRequest INVOKE:1-1-22-3-1 Include the ElectronicSerialNumber parameter set to identify the called MS
37、within a LocalTermination parameter within a TerminationList parameter.1-1-22-3-2 Include the MobileIdentificationNumber parameter, if available, and the IMSI parameter, if available, set to identify the called MS within a LocalTermination parameter within a TerminationList parameter.1-1-22-3-3 Incl
38、ude the TerminationTreatment parameter set to MS Termination within a LocalTermination parameter within a TerminationList parameter.1-1-22-3-4 IF custom alerting is applicable for the call:1-1-22-3-4-1 Include the AlertCode parameter set appropriately.1-1-22-3-5 ENDIF.1-1-22-3-6 IF triggers should b
39、e set for the terminating party at the originating switch for the redirecting call:1-1-22-3-6-1 Include the TerminationTriggers parameter.1-1-22-3-7 ENDIF.1-1-22-3-8 Set the PointOfReturn to MultipleTerminations.1-1-22-4 ELSE (multiple terminations are not allowed):1-1-22-4-1 (Applicable parameter s
40、hould be already be included.)1-1-22-4-2 Set the PointOfReturn to LocalTermination.1-1-22-5 ENDIF.1-1-23 ELSE (IntersystemTermination applies):1-1-23-1 Include the TerminationTreatment parameter set to MSTermination.1-1-23-2 IF custom alerting is applicable for the call:1-1-23-2-1 Include the AlertC
41、ode parameter set appropriately.1-1-23-3 ENDIF.1-1-23-4 IF triggers should be set for the terminating party at the terminating switch for this call:1-1-23-4-1 Include the TerminationTriggers parameter.1-1-23-5 ENDIF.1-1-23-6 Execute the “HLR Initiating a Routing Request” task (see Part 640, sec. 62.
42、1).1-1-23-7 IF the AccessDeniedReason parameter is received and it can be acted upon:1-1-23-7-1 Set the denied reason to the received AccessDeniedReason value.1-1-23-8 ENDIF.1-1-23-9 IF the ConditionallyDeniedReason parameter is received and it can be acted upon:1-1-23-9-1 IF the ConditionallyDenied
43、Reason is Waitable:1-1-23-9-1-1 IF Call Waiting is possible based upon the received OneTimeFeatureIndicator:1-1-23-9-1-1-1 Set the denied reason to Allowed.1-1-23-9-1-2 ELSE:1-1-23-9-1-2-1 Set the denied reason to Busy.X.S0004-651-E v2.0123456789101112131415161718192021222324252627282930313233343536
44、373839404142434445464748495051525354555657585960651 -5 HLR CD Incoming Call Invocation1-1-23-9-1-3 ENDIF.1-1-23-9-2 ENDIF.1-1-23-10 ENDIF.1-1-23-11 IF denied reason value is not Allowed and the AccessDeniedReason parameter can be acted upon:1-1-23-11-1 CASE denied reason OF:1-1-23-11-2 Busy: (This i
45、s the Busy PointOfDetection.)1-1-23-11-2-1 Execute the “HLR CFB Busy MS Invocation” task (see Part 651, sec. 2.5).1-1-23-11-2-2 IF the PointOfReturn is indicated:1-1-23-11-2-2-1 GOTO CDPointOfReturn.1-1-23-11-2-3 ENDIF.1-1-23-11-2-4 Execute the “HLR CFD Busy MS Invocation” task (see Part 651, sec. 3
46、.9).1-1-23-11-2-5 IF the PointOfReturn is indicated:1-1-23-11-2-5-1 GOTO CDPointOfReturn.1-1-23-11-2-6 ENDIF.1-1-23-11-2-7 Optionally, include the AnnouncementCode parameter in the AnnouncementList parameter set to an appropriate announcement.1-1-23-11-2-8 Relay the received AccessDeniedReason param
47、eter.1-1-23-11-2-9 Set PointOfReturn to ToneTermination.1-1-23-11-3 Unavailable: (This is the Unavailable PointOfDetection.)1-1-23-11-3-1 Execute the “HLR CFNA Unavailable MS Invocation” task (see Part 651, sec. 4.7).1-1-23-11-3-2 IF the PointOfReturn is indicated:1-1-23-11-3-2-1 GOTO CDPointOfRetur
48、n.1-1-23-11-3-3 ENDIF.1-1-23-11-3-4 Execute the “HLR CFD Unavailable MS Invocation” task (see Part 651, sec. 3.7).1-1-23-11-3-5 IF the PointOfReturn is indicated:1-1-23-11-3-5-1 GOTO CDPointOfReturn.1-1-23-11-3-6 ENDIF.1-1-23-11-3-7 Optionally, include the AnnouncementCode parameter in the Announcem
49、entList parameter set to an appropriate announcement.1-1-23-11-3-8 Relay the received AccessDeniedReason parameter.1-1-23-11-3-9 Set PointOfReturn to ToneTermination.1-1-23-11-4 No Page Response: (This is the Unresponsive PointOfDetection.)1-1-23-11-4-1 Execute the “HLR CFNA Unresponsive MS Invocation” task (see Part 651, sec. 4.8).1-1-23-11-4-2 IF the PointOfReturn is indicated:1-1-23-11-4-2-1 GOTO CDPointOfReturn.1-1-23-11-4-3 ENDIF.X.S0004-651-E v2.0HLR CD Incoming Call Invocation123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354
