1、The Institute of Electrical and Electronics Engineers, Inc.345 East 47th Street, New York, NY 10017-2394, USACopyright 1997 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 1997. Printed in the United States of America.ISBN 1-55937-957-XNo part of this pub
2、lication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written per-mission of the publisher.IEEE Std 1082-1997(R2010)IEEE Guide for Incorporating Human Action Reliability Analysis forNuclear Power Generating StationsSponsorNuclear Power Engineering
3、Committeeof theIEEE Power Engineering SocietyApproved 16 September 1997Reaffirmed 20 September 2010IEEE Standards BoardApproved 27 April 1998Reaffirmed 11 August 2011American National Standards InstituteAbstract: A structured framework for the incorporation of human/system interactions into probabil
4、istic riskassessments is provided.Keywords: human reliability analysis (HRA), probabilistic risk assessment (PRA)IEEE Standards documents are developed within the IEEE Societies and the Standards CoordinatingCommittees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops it
5、s standardsthrough a consensus development process, approved by the American National Standards Institute, which bringstogether volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are notnecessarily members of the Institute and serve without compensation.
6、 While the IEEE administers the processand establishes rules to promote fairness in the consensus development process, the IEEE does not independentlyevaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in itsstandards.Use of an IEEE Standard i
7、s wholly voluntary. The IEEE disclaims liability for any personal injury, property orother damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly orindirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard docu
8、ment.The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expresslydisclaims any express or implied warranty, including any implied warranty of merchantability or fitness for aspecific purpose, or that the use of the material contained herein is free f
9、rom patent infringement. IEEE Standardsdocuments are supplied “AS IS.”The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure,purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, theviewpoint exp
10、ressed at the time a standard is approved and issued is subject to change brought about throughdevelopments in the state of the art and comments received from users of the standard. Every IEEE Standard issubjected to review at least every five years for revision or reaffirmation, or every ten years
11、for stabilization.When a document is more than five years old and has not been reaffirmed, or more than ten years old and has notbeen stabilized, it is reasonable to conclude that its contents, although still of some value, do not wholly reflectthe present state of the art. Users are cautioned to ch
12、eck to determine that they have the latest edition of any IEEEStandard.In publishing and making this document available, the IEEE is not suggesting or rendering professional or otherservices for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by anyother
13、person or entity to another. Any person utilizing this, and any other IEEE Standards document, should relyupon the advice of a competent professional in determining the exercise of reasonable care in any givencircumstances.Interpretations: Occasionally questions may arise regarding the meaning of po
14、rtions of standards as they relate tospecific applications. When the need for interpretations is brought to the attention of IEEE, the Institute willinitiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concernedinterests, it is important to ensure that any
15、interpretation has also received the concurrence of a balance ofinterests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are notable to provide an instant response to interpretation requests except in those cases where the matter haspreviously received
16、formal consideration. A statement, written or oral, that is not processed in accordance withthe IEEE-SA Standards Board Operations Manual shall not be considered the official position of IEEE or any ofits committees and shall not be considered to be, nor be relied upon as, a formal interpretation of
17、 the IEEE. Atlectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standardsshall make it clear that his or her views should be considered the personal views of that individual rather than theformal position, explanation, or interpretation of the IEEE. Co
18、mments for revision of IEEE Standards are welcome from any interested party, regardless of membershipaffiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text,together with appropriate supporting comments. Recommendations to change the status of a
19、 stabilized standardshould include a rationale as to why a revision or withdrawal is required. Comments and recommendations onstandards, and requests for interpretations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854USAAuthorization to photocopy portions o
20、f any individual standard for internal or personal use is granted by the Insti-tute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright ClearanceCenter. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Serv
21、ice,222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any indi-vidual standard for educational classroom use can also be obtained through the Copyright Clearance Center.Copyright 1997 IEEE. All rights reserved. iiiIntroduction(This introduction is not pa
22、rt of IEEE Std 1082-1997, IEEE Guide for Incorporating Human Action Reliability Analysisfor Nuclear Power Generating Stations.)Any process that requires manual control to minimize public risk will require a high level of human reliabil-ity. This reliability can be evaluated through the systematic ap
23、plication of a probabilistic risk assessment(PRA). However, such an assessment requires a detailed understanding of human factors to form a completereliability estimate.The initial risk assessment made in the nuclear power plant industry, WASH-1400, recognized the need for adiscipline of human relia
24、bility analysis (HRA), systematically incorporated within the PRA enterprise. Butthe methodologyboth of analyzing human failure events and identifying and incorporating them appropri-ately in the PRAwas new, incomplete, and in several ways inadequate.The limitations of the understanding of human rel
25、iability in the mid-1970s was vividly demonstrated by theaccident at Three Mile Island (TMI). Following TMI, the Nuclear Regulatory Commission (NRC), inconjunction with the Institute of Electrical and Electronics Engineers (IEEE), immediately called for aconference on the human factor issues raised
26、by TMI. This conference has become a series, the fifth ofwhich was held in Monterey, California, in 1992. Parallel to this activity, Subcommittee 7, Human Factorsand Control Facilities, of the Nuclear Power Engineering Committee, began discussing the standardizationof the HRA technology. The PRA/HRA
27、 interface of incorporating and performing an HRA in the context ofa PRA was recognized as the most mature of the efforts of HRA. A guide, the least mandating of the IEEEstandards documents, was approved as an IEEE standards project in 1984. In recent years, some convergence in the ideas and methods
28、 of HRA has occurred. Most PRAs performHRA in a standard way, even when using approaches as diverse as the Systematic Human Action ReliabilityProcedure of the Electric Power Research Institute (EPRI) and the Accident Sequence Evaluation ProgramHRA method of the NRC.This guide outlines the steps nece
29、ssary to include human reliability in risk assessments. It is not its intent todiscuss the details of HRA methods, since this technology is evolving and cannot be addressed in the neededdepth in this guide. The reader is urged to review bibliography entries B1, B2, B5, B12, and B22 forthis informati
30、on. Since human error has been found to be an important contributor to risk, this guide under-scores the systematic integration of the HRA at the earliest stages and throughout the PRA.It is anticipated that human reliability technology will not escape controversy in the near future. This is espe-ci
31、ally true regarding the quantification of Human Error Probabilities, which is not specifically addressed inthis guide. In one sense this is a blessing, since it may ensure that the industries do not become complacentto the contribution of people and their actions to the risk spectrum of the technolo
32、gy they work.ParticipantsDuring the initial development of this guide, R. E. Hall was chair of WG7.2 and D. Schurman was secretary.WG7.2 split into WG7.2 and WG7.4. E. M. Dougherty chaired WG7.4, which assumed responsibility forthis guide. During the final stages of development, R. E. Hall chaired S
33、C7 and assumed acting chairmanshipof WG7.4. During balloting and final editing, R. J. Christensen chaired SC7 and continued with the activi-iv Copyright 1997 IEEE. All rights reserved.ties performed by WG7.4. The following list represents the membership of SC7 that attended the meetingsand contribut
34、ed to the effort:Raymond J. Christensen, ChairOther individuals who have contributed review and comments are as follows:The following persons were on the balloting committee:When the IEEE Standards Board approved this guide on 16 September 1997, it had the followingmembership:Donald C. Loughry, Chai
35、r Richard J. Holleman, Vice ChairAndrew G. Salem, Secretary*Member EmeritusAlso included are the following nonvoting IEEE Standards Board liaisons:Satish K. AggarwalAlan H. CooksonValerie E. ZelentyIEEE Standards Project EditorB. BellR. ConsidineA. DykesB. DolanE. DoughertyS. FlegerJ. FragolaR. Hall
36、B. HallbertL. HanesW. HannamanW. KleinW. LivingstonC. ReillyT. RyanD. SchurmanA. SpurginR. StarkeyA. StaveT. VossR. WatersJ. WreathallJ. ZgliczynskiL. AveryW. BanksR. Fuld G. LapinskyL. SothSatish K. AggarwalVincent P. BacanskasFarouk D. BaxterWes W. BowersDan F. BrosnanNissen M. BursteinS. P. Carfa
37、gnoRobert C. CarruthRaymond J. ChristensenRobert L. CopyakJ. J. DisoswayGary L. DomanEdward F. DowlingRich E. DulskiSurinder DurejaJay ForsterJ. R. FragolaJohn M. GallagherWil C. GangloffLuis C. GonzalezLawrence P. GradinJ. K. GreeneBritton P. GrimRobert E. HallJoe T. HazeltineGregory K. HenrySonny
38、KasturiJames T. KeiperAlex MarionJohn R. MatrasR. B. MillerBurt NemroffNeil P. SmithPeter SzabadosJames E. ThomasRaymond WeronickG. O. Wilkins onDavid J. ZapraznyMark S. ZarClyde R. CampStephen L. DiamondHarold E. EpsteinDonald C. FleckensteinJay Forster*Thomas F. GarrityDonald N. HeirmanJim IsaakBe
39、n C. JohnsonLowell JohnsonRobert KennellyE. G. “Al” KienerJoseph L. Koepfinger*Stephen R. LambertLawrence V. McCallL. Bruce McClungMarco W. MigliaroLouis-Franois PauGerald H. PetersonJohn W. PopeJose R. RamosRonald H. ReimerIngo RschJohn S. RyanChee Kiow TanHoward L. WolfmanCopyright 1997 IEEE. All
40、rights reserved. vContents1. Overview 11.1 Scope 11.2 Purpose. 12. Definitions . 13. Overview of an integrated HRA 23.1 Overall evaluation issues . 23.2 HRA process 34. Details of the HRA process . 54.1 Select and train team 64.2 Familiarize team with plant . 84.3 Build initial plant model 84.4 Scre
41、en human interactions . 94.5 Characterize human interactions 104.6 Quantify human interactions 114.7 Evaluate additional recoverability . 114.8 Update plant model 124.9 Review results 125. Documentation. 13Annex A (informative) An example for documenting HRA data . 14Annex B (informative) Bibliograp
42、hy 17Copyright 1997 IEEE. All rights reserved. viCopyright 1997 IEEE. All rights reserved. 1IEEE Guide for Incorporating Human Action Reliability Analysis forNuclear Power Generating Stations1. Overview1.1 ScopeThis guide provides a structured framework for the incorporation of human/system interact
43、ions into probabi-listic risk assessments (PRAs).1.2 PurposeThe purpose of this guide is to enhance the analysis of human/system interactions in PRAs, to help ensurereproducible conclusions, and to standardize the documentation of such assessments. To do this, a specifichuman reliability analysis (H
44、RA) framework is developed from standard practices to serve as a benchmarkto assess alternative ways of incorporating HRA into PRA.2. DefinitionsSeveral terms used in this guide are important, yet are ambiguous in common usage or not used frequentlyenough to be well known. They are defined in this c
45、lause.2.1 cognitive process: An internal human activity that receives, manipulates, and stores knowledge or infor-mation, or that controls actions according to this knowledge.2.2 consequences: The result(s) of (i.e., events that follow and depend upon) a specified event.2.3 diagnosis: A cognitive as
46、sessment of the state of the system.2.4 event: (A) Any change in conditions or performance of interest. (B) An occurrence at a specific point intime.2.5 event tree: A graphical representation of the logical progression of the possible scenarios through amultiple series of events that may, or may not
47、 occur.IEEEStd 1082-1997 IEEE GUIDE FOR INCORPORATING HUMAN ACTION RELIABILITY ANALYSIS2 Copyright 1997 IEEE. All rights reserved.2.6 fault tree: A graphical representation of an analytical technique whereby an undesired state of a systemis specified and the patterns leading to that state can be eva
48、luated to determine how the undesirable systemfailure can occur.2.7 framework: A conceptual system of tasks or activities used in a specified type of analysis.2.8 human action: The observable result (often a bodily movement) of a persons intention.2.9 human interaction: A human action or set of acti
49、ons that affects equipment, response of systems, orother human actions.2.10 model: An analog representation, which may be conceptual, qualitative, or quantitative.2.11 recovery: A set of interactions intended to restore failed equipment or to find alternatives to achieve itsfunction.2.12 reliability unit: That portion of a system for which a single reliability model is valid, i.e., for whichthere is a single mechanism of failure.2.13 rule: (A) A series of steps or activities with a single known or anticipated result. (B) A guideline foracting or planning action.2.
