1、ANSI Z21.61-1983(reaffirmed 2013)Gas-Fired ToiletsLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards thro ugh a consensus standardsdevelopment pro cess approved by the Standards Council of Canada and the American National Stand
2、ards Institut e. This process bringstogether volunteer s representing varied viewpoints and interes ts to achieve consensus and develop a standard. Although CSA Groupadminist ers the process and est ablishes rules to pro mote fairness in achieving consensus, it does not independently tes t, evaluat
3、e, or verify thecontent of standards.Disclaimer and exclusion of liabilityThis document is pro vided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this document s fitness for a particu
4、lar purpose or use, its merchantability , or its non-infringementof any third party s intellectual pro perty rights. CSA Group does not warrant the accuracy , complet eness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding th
5、is document s compliance with any applicablestatut e, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSE
6、S, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING
7、FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render pro fessional or other services for or on behalf of an
8、yperson or entity or to perform any duty owed by any person or entity to another person or entity . The information in this document is directedto those who have the appropriat e degree of experience to use and apply its conten ts, and CSA Group accepts no responsibility whatsoeverarising in any way
9、 from any and all use of or reliance on the information contained in this document.CSA Group is a private not -for -profit company that publishes voluntary standards and related documents. CSA Group has no power , nor does itundertake, to enforce compliance with the contents of the standards or othe
10、r documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in print ed or electronic form), CSA Group is the owner , or the authorizedlicensee, of all works contained herein that are pro tect ed by copyright, all trade-marks
11、(except as otherwise not ed to the contrary), and allinventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are prot ected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclo
12、sure of this document mayviolate laws that pro tect CSA Groups and/or other s int ellectual property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitt ed by licence or by law , CSA Group reserves all
13、 int ellectualproperty rights in this document.Patent rightsAtt ention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this st andard are express
14、ly advised that determ ination of the validity ofany such patent rights is entirely their own responsibility .Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only . The user of this document is authorized to doonly the following:If
15、 this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and bro wse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distribut ed only to persons who are authorize
16、d by CSA Group to have suchcopies, and only if this Legal Notice appear s on each such copy .In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make
17、 an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destr oy them immediately . Use of this do
18、cumentconstitut es your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceANSI Z21.61-1983 Second Edition - 1983Title: Gas-Fired ToiletsTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID
19、 that you will need to register for updates to this publication is 2008218.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.Second Edition - 1983 Prin
20、ted in U. S. A. by i American Gas Association Lab-oratories 8501 East Pleasant Valley Road . Cleveland, Ohio 44131 , Copyright 0 1983, American Gas Association I ,/ Permission isgranted to republish material herein in laws or ordinances,and in regulations, administrative orders, or similar documents
21、 issued by public authorities. Those desiring permission for other republication should consult the American Gas Association Laboratories; 8501 East Pleasant Valley Road, Cleveland, Ohio 44131. . PREFACE This publication represents a basic standard for safe operation, substantial and durable constru
22、ction, and acceptable performance of gas-fired toilets. It is the result of years of experience in the manufacture, testing, installation and mainte- nance of and research on toilets designed for the utilization of gas. Nothing in this standard is to be considered in any way as indicating a measure
23、of quality beyond compliance with the provisions it contains. It is designed to allow compliance of gas-fired toilets, the construction and performance of which may exceed the various provisions specified herein. In its preparation, full recognition has been given to possibilities of improvement thr
24、ough ingenuity of design. As progress takes place, revisions may become necessary. When they are believed desirable, recommendations should be forwarded to the Chairman of the American National Standards Committee 221, 8501 East Pleasant Valley Road, Cleveland, Ohio 44131. Safe and satisfactory oper
25、ation of a gas-fired toilet depends to a great extent upon its proper installation, and it should be installed, as applicable, in accordance with the National Fuel Gas Code, ANSI 2223.1-1980; the Manufactured Home Con- struction and Safety Standard, Title 24 CFR, Part 32-80 formerly the Federal Stan
26、- dard for Mobile Home Construction and Safety, Title 24 (Part 280) ,19751; the Stan- dard for Recreational Vehicles, (Travel Trailers, Motor Homes, Truck Campers, Camping Trailers) ANSIlNFPA 5OlC-1977; manufacturers installation instruc- tions; and local municipal codes. CAUTION NOTICE: This Americ
27、an National Standard may be revised or with- drawn at any time. The procedures of the American National Standards Institute, Inc., require that action be taken to reaffirm, revise or withdraw this standard no later than five (5) years from the date of approval. Purchasers of American National Standa
28、rds may receive current information on all standards by calling or writing the American National Standards Institute, Inc., 1430 Broadway, New York, New York 10018, (212) 354-3300. HISTORY OF THE DEVELOPMENT OF STANDARD FOR GAS-FIRED TOILETS (This History is informative and is not part of the standa
29、rd.) American National Standards Committee 221, at its April 5, 1972 meeting, agreed that a standard for gas-fired toilets utilizing an incineration process should be developed and assigned the task to its Subcommittee on Standards for Domestic Gas-Fired Incinerators. Prior to this time, the constru
30、ction and performance of gas-fired toilets had been evaluated under the applicable provisions of the domestic gas-fired incinerator standard (221.6) and guidelines formulated by the 221 incinerator subcommit- tee. A draft of the standard for gas-fired toilets, patterned after the domestic incinerato
31、r standard, was reviewed and modified by the incinerator subcommittee at its June 12-13, 1973 meeting, by a working group of the subcommittee at its February 18-19,1974 meeting, and again by the subcom- mittee at its November 6-7, 1974 meeting. The resultant fourth draft standard, which covered both
32、 natural draft and forced draft appliances for indoor installation, includ- ing in mobile homes and recreational vehicles, was dis- tributed for review and comment during January 1975. The incinerator subcommittee, at its October 21,1975 meeting, following reconsideration of the draft standard in th
33、e light of comments received, recommended the draft standard to the 221 Committee. The 221 Committee subse- quently adopted the proposed stndard at its April 14,1976 meeting. The first edition of the gas-fired toilet standard was approved as American National Standard by the American National Standa
34、rds Institute, Inc., on January 5, 1977. Following the procedure outlined above, further revi- sions to this standard were developed in line with industry developments. This, the second edition of the gas-fired toilet standard, was approved as American National Stan- dard by the American National St
35、andards Institute, Inc., on February 15,1983. AMERICAN NATIONAL STANDARDS COMMITTEE 221 HOWARD I. FORMAN, Chairman W. L. WALLS, Vice Chairman F. G. HAMMAKER, Administrative Secretary (Non-Member) REPRESENTING AIR-CONDITIONING REPRESENTING GAS APPLIANCE CONTRACTORS OF AMERICA: MANUFACTURERS ASSOCIATI
36、ON, INC.: James P. Norris REPRESENTING AMERICAN GAS ASSOCIATION: D. M. Amundson E. E. Arther Richard A. Bleakney Norman A. Elkins Henry H. Miller Eugene C. Nessly James A. Radcliffe Jack V. Richards, Jr. Walter S. Wilson REPRESENTING AMERICAN INSURANCE ASSOCIATION: W. D. Malmstedt William E. Dalton
37、D. D. Dennis John M. Lyle William V. McDonnell Earl A. McGee Robert W. Newell Hal H. Rhea S. F. Skafte Ernest Wenczl INDIVIDUAL MEMBER: Howard I. Forman REPRESENTING INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS: Jack Allen REPRESENTING AMERICAN PUBLIC GAS ASSOCIATION: David F. Hans
38、en REPRESENTING MECHANICAL CONTRACTORS ASSOCIATION OF AMERICA, INC.: Anthony E. Lavelle William C. Abernathy (Alternate) REPRESENTING THE CANADIAN GAS ASSOCIATION: REPRESENTING NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION: John A. Spence REPRESENTING CONSUMERS UNION: J. R. Gaul J. R. Willson S. F.
39、Ciricillo (Alternate) G. E. Willert (Alternate) George Papritz REPRESENTING FACTORY MUTUAL SYSTEM: James M. Simmons REPRESENTING NATIONAL FIRE PROTECTION ASSOCIATION: W. L. Walls . . . 111 American National Standards Committee 221 Membership REPRESENTING NATIONAL LP-GAS ASSOCIATION: Walter H. Johnso
40、n REPRESENTING NATIONAL SAFETY COUNCIL: George Koza REPRESENTING SOUTHERN BUILDING CODE CONGRESS: M. L. Graham REPRESENTING UNDERWRITERS LABORATORIES INC.: W. J. Smith S. Mazzoni (Alternate) REPRESENTING U. S. CONSUMER PRODUCT SAFETY COMMISSION: Sidney H. Greenfeld REPRESENTING U. S. DEPT. OF ENERGY
41、 Ernie Freeman REPRESENTING U. S. GENERAL SERVICES ADMINISTRATION, FEDERAL SUPPLY SERVICE: Scott Wallis REPRESENTING U. S. DEPT. OF HEALTH, EDUCATION, AND WELFARE: Sam K. Jolly REPRESENTING U. S. DEPT. OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND: W. E. Watkins (Alternate) iv SUBCOMMITTEE ON STA
42、NDARDS FOR DOMESTIC GAS-FIRED INCINERATORS REPRESENTING GAS COMPANIES: Donald C. Gladue REPRESENTING MANUFACTURERS: Robert C. Helke David R. Stempin G. E. Willert CONTENTS PART I. CONSTRUCTION 1.1 Scope . 1 1.2 General Construction and Assembly . 1 1.3 Materials 2 1.4 Burners . 2 1.5 Primary Air Adj
43、ustment Means . 3 1.6 Orifice Spuds and Orifice Holders . 3 1.7 Automatic Gas Ignition Systems 4 1.8 Pilot Gas Filters . 5 1.9 Manual Gas Valves . 5 1.10 Automatic Valves 5 1.11 Gas Supply Lines . 5 1.12 Gas Appliance Pressure Regulators . 6 1.13 Frames and Casings 6 1.14 Combustion Air and Ventilat
44、ion . 7 1.15 Waste Screens . 7 1.16 Incinerating Chambers . 7 1.17 Insulation . 7 1.18 Flue Collars and Flue Outlets . 7 1.19 Draft Control 7 1.20 Vent-Air Intake Pipes of Isolated Combustion Systems . 8 1.21 Timing Devices 9 1.22 Ash Receptacles 9 1.23 Strength . 9 1.24 Electrical Equipment and Wir
45、ing 9 1.25 Instructions 15 1.26 Marking Materials . 18 1.27 Marking . 19 PART II. PERFORMANCE 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 General Test Gases . Test Pressures and Burner Adjustments . Combustion Burner and Pilot Operating Characteristics Automatic Gas Ignition Systems Proo
46、f of Air Flow ManualGas Valves . Automatic Valves Gas Appliance Pressure Regulators . Particulate Emission Characteristics, Incinerating Effectiveness, Smoke and Odor Evaluations, and Flue Gas Temperatures Effluent Odor Evaluation . Wall, Floor and Ceiling Temperatures . Page 21 24 24 25 25 27 30 31
47、 31 31 31 33 33 vi CONTENTS (Continued) Page 2.14 Evaluation of Burn Hazard Potential of Exterior Surfaces . 34 2.15 Temperatures of Handles, Knobs and Seat . 36 2.16 Timing Devices 36 2.17 Manifold and Control Assembly Capacity 36 2.18 Isolated Combustion Systems . 36 2.19 Marking Material Adhesion
48、 and Legibility . 38 Exhibit A. Description of Effluent Sampling Train . . . . . . . . . . . . . . . . . . . . . . . . 42 Exhibit B. Use of Effluent Sampling Train for Isokinetic Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Exh
49、ibit C. Determination of Particulates in Effluent and Verification of Isokinetic Sampling . . . . . . . . . . . . . . . . . . . . . , . . . . . . 45 PART III. MANUFACTURING AND PRODUCTION TESTS . . . . . . . . . . . . . . . . 52 PART IV. DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 APPENDIX A. 58 APPENDIX B ,.,.,. 59 APPENDIX C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 APPENDIX D. 61 APPENDIX E. 63 APPENDIX F . .
