1、NOTE: Changes, other than editorial, are denoted by a vertical line in the margin.Approved August 10, 2012 by American National Standards Institute, Inc.Approved August 9, 2012 by Interprovincial Gas Advisory Council. Effective in Canada January 1, 2014.Standards DeveloperCSA America, Inc. Canadian
2、Standards AssociationOperating as “CSA Group” Operating as “CSA Group”8501 East Pleasant Valley Road 5060 Spectrum Way, Suite 100Cleveland, Ohio 44131 Mississauga, Ontario, Canada L4W 5N6Published - September 2012 Page 1 of 1Copyright 2012CSA GroupPermission is granted to republish material herein i
3、n laws or ordinances, and in regulations, administrative orders, or similar documents issued by public authorities. Those desiring permission for other republication should consult Canadian Standards Association, operating as CSA Group, at 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L
4、4W 5N6.Copyright 2012CSA GroupPermission is granted to republish material herein in laws or ordinances, and in regulations, administrative orders, or similar documents issued by public authorities. Those desiring permission for other republication should consult CSA America, Inc., operating as CSA G
5、roup, at 8501 East Pleasant Valley Road, Cleveland, Ohio 44131.Addenda to the Third EditionANSI Z21.18-2007 CSA 6.3-2007 andANSI Z21.18a-2010 CSA 6.3a-2010American National Standard/CSA Standard forGas Appliance Pressure Regulators ANSI Z21.18b-2012CSA 6.3b-2012Part I: Construction1.4 Connections1.4
6、.6Standard flange connections, when provided, shall be constructed in accordance with the dimensional specifications for 125 lb cast-iron flanges of the Standard for Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800, ANSI/ASME B16.1. (See Figure 1,125 Pound Cast Iron Pipe Flange Body Connec-tions.)Standard steel flange connections, when provided, shall be constructed in accordance with the dimensional specifications in the Standard for Pipe Flanges and Flanged Fittings, ANSI/ASME B16.5.
