1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2003 prEN 41 65-022 Edition P 1 February 2003 Comments should be sent within six months after the date of publication to Electrical Domain AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Connector
2、s, electrical, rectangular, modular Operating temperature 175 OC continuous Part 022: Insertion/extraction tool for removal of modules Product standard Srie arospatiale Luft- und Raumfahrt Connecteurs lectriques rectangulaires Elektrischer Rechtecksteckverbinder Temprature dutilisation 175 OC contin
3、u Betriebstemperatur 175 OC konstant Partie 022 : Outils dinsertion/extraction Teil 022: Einsetz- und Auszugswerkzeug modulaires in modularer Bauweise pour modules fr die Module Norme de produit Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN
4、(The European Association of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard,
5、 the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of AECMA-STAN it will be submitted as a draft European Standard to CEN (Euro
6、pean Committee for Standardization) for formal vote. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 2 prEN 4165-022: 2003 Foreword This standard
7、was reviewed by the Domain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA- STANS General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope 3 2 Normative
8、 references . 3 3 Terminology 3 4 Required characteristics 3 5 Insertion/extraction tool 4 6 Designation . 6 7 Technical specification 6 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permi
9、tted without license from IHS-,-,-Page 3 prEN 4165-022: 2003 1 Scope This standard defines the insertion/extraction tool for removal of modules used in the family of rectangular electrical connectors. 2 Normative references This European Standard incorporates by dated or undated reference provisions
10、 from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by ame
11、ndment or revision. For undated references the latest edition of the publication referred to apply. EN 41 65-001, Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 001: Technical specification - Product standard 1 ) 3 Term in ol ogy See
12、EN 4165-001. 4 Required characteristics Dimensions are in millimetres. 1) Published as AECMA standard at the date of publication of this standard Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or network
13、ing permitted without license from IHS-,-,-Page 4 prEN 4165-022: 2003 5 Insertion/extraction tool 5.1 For standard mounted module See Figure 1. Figure 1 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or
14、networking permitted without license from IHS-,-,-Page 5 prEN 4165-022: 2003 5.2 For sealed mounted module See Figure 2. Figure 2 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted wi
15、thout license from IHS-,-,-Page 6 prEN 4165-022: 2003 Description block INSERTION EXTRACTION TOOL FOR 6 Designation EXAMPLE: Identity block REMOVAL MODULES I EN4165T -rT Number of the basic standard T: tool N: normal mounting module S: sealed mounting module I 7 See EN 4165-001. Tech n i cal specification Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
