1、PUBLISHED DOCUMENT PD CLC/TR 62102:2006 Electrical safety Classification of interfaces for equipment to be connected to information and communications technology networks ICS 35.020; 29.020 PD CLC/TR 62102:2006 This Published Document was published under the authority of the Standards Policy and Str
2、ategy Committee on 31 May 2006 BSI 2006 ISBN 0 580 48408 4 National foreword This Published Document is the official English language version of CLC/TR 62102:2006. The UK participation in its preparation was entrusted to Technical Committee EPL/108, Safety of electronic equipment within the field of
3、 audio/video, information technology and communication technology, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referre
4、d to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisio
5、ns of a contract. Users are responsible for its correct application. Compliance with a Published Document does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation,
6、or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the CLC/TR title page, the CLC/TR forward page, the IEC/TR title page, pages
7、2 to 24, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments TECHNICAL REPORT CLC/TR 62102 RAPPORT TECHNIQUE TECHNISCHER BERICHT April 2006 CENELEC European
8、Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CEN
9、ELEC members. Ref. No. CLC/TR 62102:2006 E ICS 35.020; 29.020 Supersedes CLC/TR 62102:2005English version Electrical safety Classification of interfaces for equipment to be connected to information and communications technology networks (IEC/TR 62102:2005 ) Scurit lectrique Classification des interf
10、aces pour les matriels destins tre connects des rseaux de traitement de linformation et de communication (CEI/TR 62102:2005 ) Elektrische Sicherheit Klassifizierung der Schnittstellen fr den Anschluss von Gerten an Informations- und Kommunikationsnetze (IEC/TR 62102:2005 ) This Technical Report was
11、approved by CENELEC on 2005-10-08. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland
12、, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of the Technical Report IEC/TR 62102:2005, prepared by IEC TC 108, Safety of electronic equipment within the field of audio/video, information technology and communication technology, was su
13、bmitted to the formal vote and was approved by CENELEC as CLC/TR 62102 on 2005-10-08. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62102:2005 was approved by CENELEC as a Technical Report without any modification. _ CLC/TR 62102:2006 CLC/TR 62102:2
14、006 TECHNICAL REPORT IECTR 62102Second edition 2005-05Electrical safety Classification of interfaces for equipment to be connected to information and communications technology networks Reference number IEC/TR 62102:2005(E) CLC/TR 62102:2006 CLC/TR 62102:2006 CONTENTS INTRODUCTION 3 1 Scope 4 2 Norma
15、tive references .4 3 Terms and definitions .5 3.1 Definitions from IEC 60950-1.5 3.2 Definitions from IEC 60950-21 .7 3.3 Additional definitions for this document7 3.4 Abbreviations 8 4 Reference configuration .8 5 Safety categories of interfaces provided for connection to an information and communi
16、cations technology network.11 5.1 SELV circuits.11 5.2 TNV circuits 11 5.3 User information11 5.4 RFT circuits.11 6 Phenomena affecting the safety of interface ports.11 6.1 Network Environment 012 6.2 Network Environment 112 7 Determination of circuit type .13 Annex A (informative) Consideration of
17、interface phenomenon .14 Annex B (informative) Worked examples of certain network interfaces17 Annex C (informative) Conditions for Network Environment 0 .20 Annex D (informative) Voltage ranges of SELV circuits and TNV circuits 21 Annex ZA (informative) Normative references to international publica
18、tions with their corresponding European publications 24 Bibliography .22 2 CLC/TR 62102:2006INTRODUCTION This technical report is a guide to the determination of the interface requirements for equipment in terms of safety. It lists a number of interfaces and indicates the safety category of each lis
19、ted interface. This technical report does not contain sufficient detail for conformance testing purposes, except when used in conjunction with product standards such as IEC 60950-1 and IEC 60950-21. The equipment safety standards IEC 60950-1 and IEC 60950-21 specify the requirements for categories o
20、f circuits as SELV circuits, TNV circuits, RFT circuits and hazardous voltage circuits (among others). For stand-alone equipment it is a relatively simple matter to determine the different categories of circuits. However, an equipment which has data port interfaces is intended to be connected to oth
21、er equipment, either locally or via a network. In this case, the safety categories of the interfaces which will be connected together have to be compatible with each other. Furthermore, the category of the interface of the remote equipment may be unknown. This is the case in systems where telecommun
22、ication equipment and data processing equipment are connected together via different types of interfaces and networks. To overcome this situation it is necessary to classify the interfaces of equipment in such configurations according to the application and to select the safety category for the inte
23、rfaces of the equipment and for the type of the network. Similarly, the interfaces have to be classified for protection against damage of the equipment and of the network. Aspects of protection are dealt with in the ITU-T K series of recommendations. 3 CLC/TR 62102:2006ELECTRICAL SAFETY CLASSIFICATI
24、ON OF INTERFACES FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATIONS TECHNOLOGY NETWORKS 1 Scope This technical report applies to equipment interfaces. These interfaces within the equipment may be connected to telecommunication networks, may form part of the telecommunication network inf
25、rastructure or may provide localized transfer of data. This technical report provides guidance on the classification of interfaces in accordance with the circuit types defined in IEC 60950-1 and IEC 60950-21 following an analysis of the telecommunication network characteristics. This technical repor
26、t only covers equipment appropriately interconnected. Furthermore, it does not address damage caused by one equipment to another equipment to which it is connected. Exceptionally, interfaces may be designed for higher or lower levels for special applications. In such cases it should be ensured that
27、only interfaces having the same safety category and protection level are connected together. This is based on the available specifications of the equipment manufacturers and network providers, and on information regarding the installation category of the mains interface. This technical report is int
28、ended to be used by equipment designers, network operators, network regulators/authorities, standards writers and network installers. It is applicable to various interfaces of equipment. Network presentations are not equipment and so are not covered by IEC 60950-1 and IEC 60950-21; hence they are al
29、so not covered by this technical report. However, it is necessary to consider the characteristics, installation and presentation of telecommunication networks when determining what equipment interface requirements apply (for example, SELV circuit, TNV-1 circuit, TNV-2 circuit, TNV-3 circuit etc.). I
30、f a standard other than IEC 60950-1 or IEC 60950-21 is used for designing the equipment and its interface (for example, IEC 62151 in conjunction with other product safety standards), then the corresponding requirements of these other standards are to be preferred. If there is a conflict between this
31、 technical report and a more detailed specification, the latter prevails. This technical report applies regardless of ownership or responsibility for installation and maintenance of the equipment or network. NOTE Terminal equipment is often connected to customer premises cabling when used in a busin
32、ess environment, and there are standards covering such cabling. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen
33、t (including any amendments) applies. IEC 60950-1:2001, Information technology equipment Safety Part 1: General requirements IEC 60950-21:2002, Information technology equipment Safety Part 21: Remote power feeding 4 CLC/TR 62102:20063 Terms and definitions For the purposes of this document, the foll
34、owing terms and definitions apply. 3.1 Definitions from IEC 60950-1 3.1.1 a.c. mains supply a.c. power distribution system external to the equipment for supplying power to a.c. powered equipment. These power sources include public or private utilities and, unless otherwise specified in the standard,
35、 equivalent sources such as motor-driven generators and uninterruptible power supplies IEC 60950-1, definition 1.2.8.1 3.1.2 hazardous voltage voltage exceeding 42,4 V peak, or 60 V d.c., existing in a circuit which does not meet the requirements for either a limited current circuit or a TNV circuit
36、 IEC 60950-1, definition 1.2.8.5 3.1.3 limited current circuit circuit which is so designed and protected that, under both normal operating conditions and single fault conditions, the current which can be drawn is not hazardous IEC 60950-1, definition 1.2.8.8 3.1.4 primary circuit circuit which is d
37、irectly connected to the a.c. mains supply. It includes, for example, the means for connection to the a.c. mains supply, the primary windings of transformers, motors and other loading devices IEC 60950-1, definition 1.2.8.3 3.1.5 secondary circuit circuit which has no direct connection to a primary
38、circuit and derives its power from a transformer, converter or equivalent isolation device, or from a battery IEC 60950-1, definition 1.2.8.4 3.1.6 SELV circuit secondary circuit which is so designed and protected that under normal operating conditions and single fault conditions, its voltages do no
39、t exceed a safe value IEC 60950-1, definition 1.2.8.7 3.1.7 TNV circuit (including TNV-1 circuit, TNV-2 circuit, TNV-3 circuit) circuit that is in the equipment and to which the accessible area of contact is limited and that is so designed and protected that, under normal operating conditions and si
40、ngle fault conditions, the voltages do not exceed specified limit values IEC 60950-1, definition 1.2.8.10 5 CLC/TR 62102:20063.1.8 telecommunication network metallically terminated transmission medium intended for communication between equipment that may be located in separate buildings, excluding:
41、the mains system for supply, transmission and distribution of electrical power, if used as a telecommunication transmission medium; cable distribution systems; SELV circuits connecting units of data processing equipment NOTE 1 The term telecommunication network is defined in terms of its functionali
42、ty, not its electrical characteristics. A telecommunication network is not itself defined as being either an SELV circuit or a TNV circuit. Only the circuits in the equipment are so classified. NOTE 2 A telecommunication network may be: publicly or privately owned; subject to transient overvoltages
43、due to atmospheric discharges and faults in power distribution systems; subject to longitudinal (common mode) voltages induced from nearby power lines or electric traction lines. NOTE 3 Examples of telecommunication networks are: a public switched telephone network; a public data network; an Integra
44、ted Services Digital Network (ISDN); a private network with electrical interface characteristics similar to the above. IEC 60950-1, definition 1.2.13.8 3.1.9 cable distribution system metallically terminated transmission medium using coaxial cable, mainly intended for transmission of video and/or au
45、dio signals between separate buildings or between outdoor antennas and buildings, excluding: the mains system for supply, transmission and distribution of electric power, if used as a communication transmission medium; telecommunication networks; SELV circuits connecting units of information technol
46、ogy equipment NOTE 1 Examples of cable distribution systems are: local area cable networks, community antenna television systems and master antenna television systems providing video and audio signal distribution; outdoor antennas including satellite dishes, receiving antennas, and other similar dev
47、ices. NOTE 2 Cable distribution systems may be subjected to greater transients than telecommunication networks. IEC 60950-1, definition 1.2.13.14 3.1.10 service person person having appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed in
48、performing a task and of measures to minimize the risks to that person or other persons IEC 60950-1, definition 1.2.13.5 3.1.11 user any person, other than a service person IEC 60950-1, definition 1.2.13.6 6 CLC/TR 62102:20063.2 Definitions from IEC 60950-21 3.2.1 RFT circuit remote feeding telecomm
49、unication circuit a secondary circuit within the equipment, intended to supply or receive d.c. power via a telecommunication network at voltages equal to or exceeding the limits for TNV circuits, and on which overvoltages from telecommunication networks are possible IEC 60950-1, definition 3.1 3.2.2 RFT-C circuit an RFT circuit which is so designed and protected that
