1、BSI Standards Publication BS ISO/IEC 14543-4-3:2015 Information technology Home electronic system (HES) architecture Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1BS ISO/IEC 14543-4-3:2015 BRITISH STANDARD National foreword Th
2、is British Standard is the UK implementation of ISO/IEC 14543-4-3:2015. The UK participation in its preparation was entrusted to Technical Committee IST/6/-/12, Home Electronic Systems. A list of organizations represented on this committee can be obtained on request to its secretary. This publicatio
3、n does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 83577 3 ICS 35.200 Compliance with a British Standard cannot confer immunity fro
4、m legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2015. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS ISO/IEC 14543-4-3:2015Edition 1.0 2015-09 ISO/IEC 14543-4-3 INTERNATIONAL ST
5、ANDARD Information technology Home electronic system (HES) architecture Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1 ISO/IEC 14543-4-3:2015-09(en) colour insideBS ISO/IEC 14543-4-3:2015THIS PUBLICATION IS COPYRIGHT PROTECTED
6、 Copyright 2015 ISO/IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs m
7、ember National Committee in the country of the requester. If you have any questions about ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Offi
8、ce Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic
9、 and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone a
10、pplication for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC
11、 publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publicatio
12、ns released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also kn
13、own as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected fr
14、om earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. BS ISO/IEC 14543-4-3:2015ISO/IEC 14543-4-3 Edition 1.0
15、 2015-09 INTERNATIONAL STANDARD Information technology Home electronic system (HES) architecture Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1 INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 35.200 ISBN 978-2-8322-2868-5 Warnin
16、g! Make sure that you obtained this publication from an authorized distributor. colour insideBS ISO/IEC 14543-4-3:2015 2 ISO/IEC 14543-4-3:2015 ISO/IEC 2015 CONTENTS FOREWORD . 5 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions
17、7 3.2 Abbreviations 9 4 Conformance . 9 5 Services of the application layer 9 5.1 Positioning in communications layers 9 5.1.1 General . 9 5.1.2 When using UDP in layer 4 and IP in layer 3 10 5.2 Service primitives of the application layer . 10 5.2.1 General . 10 5.2.2 NECD objects from the viewpoin
18、t of application software . 11 5.2.3 Case 1: Obtaining the status of another node 11 5.2.4 Case 2: Controlling the functions of other nodes 12 5.2.5 Case 3: Notifying own node status to other nodes . 13 6 Application layer protocol data unit (APDU) . 15 6.1 Overview. 15 6.2 NECD header (NHD) . 16 6.
19、2.1 Overview . 16 6.2.2 NECD header 1 (NHD1) . 16 6.2.3 NECD header 2 (NHD2) . 17 6.3 Transaction ID (TID) . 17 6.4 NECD data (NDATA) . 17 6.5 NECD object (NOJ) . 17 6.6 NECD Service (NSV) 18 6.6.1 Overview . 18 6.6.2 Property value write service (no response required) 0x60, 0x50 22 6.6.3 Property v
20、alue write service (response required) 0x61, 0x71, 0x51 22 6.6.4 Property value read service 0x62, 0x72, 0x52 23 6.6.5 Property value write and read service 0x6E, 0x7E, 0x5E . 24 6.6.6 Property value notification service 0x63, 0x73, 0x53 25 6.6.7 Property value notification (response required) 0x74,
21、 0x7A 26 6.7 Processing object property counters (OPC, OPCSet and OPCGet) . 27 6.8 NECD property (NPC) . 27 6.9 Property data counter (PDC) . 28 6.10 NECD property value data (NDT) 28 7 Basic sequences . 29 7.1 General . 29 7.2 Basic sequences for object control 29 7.2.1 Overview . 29 7.2.2 Basic se
22、quences for object control in general 29 7.2.3 Basic sequences for service content 30 BS ISO/IEC 14543-4-3:2015 ISO/IEC 14543-4-3:2015 3 ISO/IEC 2015 7.3 Basic sequences for node start-up 32 7.3.1 Overview . 32 7.3.2 Basic sequence for NECD node start-up 32 8 NECD objects Detailed specifications . 3
23、3 8.1 General . 33 8.2 Types of objects 33 8.2.1 Device objects . 33 8.2.2 Node profile object 33 8.3 NECD property value data types . 33 8.3.1 Overview . 33 8.3.2 NECD property value range . 34 8.3.3 Class-specific mandatory properties 34 8.3.4 Profiles obliged to have a status change announcement
24、function . 35 Bibliography 36 Figure 1 Communications middleware 9 Figure 2 Acquisition of status of another node (synchronous type) . 11 Figure 3 Acquisition of status of another node (asynchronous type) . 12 Figure 4 Objects seen from application software 12 Figure 5 Method of controlling other no
25、des 13 Figure 6 Objects seen from application software 13 Figure 7 Method of notification to other nodes (synchronous type) . 14 Figure 8 Method of notification to other nodes (asynchronous type) . 14 Figure 9 Objects seen from application software 14 Figure 10 Example of object configuration . 15 F
26、igure 11 NECD frame format 16 Figure 12 Bit specifications of NHD 1 . 17 Figure 13 Detailed specifications of NHD 2 17 Figure 14 Bit specifications of the NOJ code 18 Figure 15 Bit specifications of the NSV code 18 Figure 16 Sequence diagram for NSV transmission and reception . 21 Figure 17 NDATA co
27、nfiguration for property value write service (no response required) . 22 Figure 18 NDATA configuration for property value write service (response required) 23 Figure 19 NDATA configuration for property value read service . 24 Figure 20 NDATA configuration for property value write and read service 25
28、 Figure 21 NDATA configuration for property value notification service . 26 Figure 22 NDATA configuration for property value notification (response required) service 27 Figure 23 Processing target property counter for three requests 27 Figure 24 NPC detailed specifications 28 Figure 25 NPC code allo
29、cation . 28 Figure 26 Basic sequence when controlled object does not exist . 29 Figure 27 Basic sequence when controlled objects exist 30 Figure 28 Basic request receiving sequence for NSV = 0x60 30 BS ISO/IEC 14543-4-3:2015 4 ISO/IEC 14543-4-3:2015 ISO/IEC 2015 Figure 29 Basic request receiving seq
30、uence for NSV = 0x6* 31 Figure 30 Basic request receiving sequence for NSV = 0x63 31 Figure 31 Basic property value notification sequence . 32 Figure 32 Basic sequence for NECD node start-up 32 Table 1 List of NSV Codes for Requests 20 Table 2 List of NSV codes for response/notification . 20 Table 3
31、 List of NSV codes for “Response not possible” 21 Table 4 Data types, data sizes and overflow / underflow codes 34 BS ISO/IEC 14543-4-3:2015 ISO/IEC 14543-4-3:2015 5 ISO/IEC 2015 INFORMATION TECHNOLOGY HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE Part 4-3: Application layer interface to lower communica
32、tions layers for network enhanced control devices of HES Class 1 FOREWORD 1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC part
33、icipate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, government
34、al and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. 2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible,
35、 an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees and ISO member bodies. 3) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and are accepted by IEC Nat
36、ional Committees and ISO member bodies in that sense. While all reasonable efforts are made to ensure that the technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4)
37、 In order to promote international uniformity, IEC National Committees and ISO member bodies undertake to apply IEC, ISO and ISO/IEC publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any ISO, IEC or ISO/IEC publication and t
38、he corresponding national or regional publication should be clearly indicated in the latter. 5) ISO and IEC do not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. ISO or IEC are not
39、responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts and members of their
40、 technical committees and IEC National Committees or ISO member bodies for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO
41、/IEC publication or any other IEC, ISO or ISO/IEC publications. 8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the
42、elements of this ISO/IEC publication may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. International Standard ISO/IEC 14543-4-3 was prepared by subcommittee 25: Interconnection of information technology equipment, of ISO/IEC
43、 joint technical committee 1: Information technology. The list of all currently available parts of the ISO/IEC 14543 series, under the general title Information technology Home electronic system (HES) architecture, can be found on the IEC web site and ISO web site. This International Standard has be
44、en approved by vote of the member bodies, and the voting results may be obtained from the address given on the second title page. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IMPORTANT The colour inside logo on the cover page of this publication indicates that
45、 it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS ISO/IEC 14543-4-3:2015 6 ISO/IEC 14543-4-3:2015 ISO/IEC 2015 INTRODUCTION This part of ISO/IEC 14543 specifies the message struc
46、ture, sequences and protocol of the application layer for use in the Home Electronic System. Some services are targeted for communications between devices. Other services are exclusively reserved for management purposes. Some services can be used for both management and run-time communications. This
47、 standard is applicable for energy management services, mobile access, remote appliance maintenance services, home healthcare services, home security services and comfort control. This standard focuses on the application layers (5 thlayer to 7 thlayer of the OSI reference model). This standard speci
48、fies a message structure that differs from the 12 message structures specified in ISO/IEC 14543-4-1. This standard allows the use of IP addressing or MAC addressing, while ISO/IEC 14543-4-1 specifies a different non-IP address structure. This part depends on routing functions provided by an external
49、 IP layer. ISO/IEC 14543-4-1 uses the routing functions specified in ISO/IEC 14543-4-2. Therefore Part 4-3 is an alternative to Part 3-1 plus Part 3-2. ISO/IEC 14543, Information technology Home Electronic System (HES) architecture, provides an introduction to specifications for Home Electronic System (HES): Part 2-1: Introduction and device modularity and specifications for three types of HES devices: Parts 3-x Specifications for network based contro
