1、IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines IEEE Std 656-2018 (Revision of IEEE Std 656-1992) IEEE Power and Energy Society Sponsored by the Transmission and Distribution Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std 656-2018 (Revision of IE
2、EE Std 656-1992) IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines Sponsor Transmission and Distribution Committee of the IEEE Power and Energy Society Approved 15 February 2018 IEEE-SA Standards BoardAbstract: Uniform procedures are established for manual and autom
3、atic measurement of audible noise from overhead transmission lines. Their purpose is to allow valid evaluation and comparison of the audible noise performance of various overhead lines. Definitions are provided, and instruments are specified. Measurement procedures are set forth, and precautions are
4、 given. Supporting data that should accompany the measurement data are specified, and methods for presenting the latter are described. Keywords: audible noise, IEEE 656, overhead transmission lines The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, US
5、A Copyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 30 March 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiv
6、eness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not
7、imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in
8、 the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person
9、 or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IE
10、EE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF L
11、IABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2018 IEE
12、E. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement,
13、 written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, s
14、ymposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standard
15、s documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together
16、 with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordina
17、ting Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard
18、is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations.
19、 Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, i
20、ntend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variet
21、y of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private us
22、ers, IEEE does not waive any rights in copyright to the documents.5 Copyright 2018 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational i
23、nternal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom
24、 use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amen
25、dments, corrigenda, or errata. A current IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years ol
26、d and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whethe
27、r a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards dev
28、elopment process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata period
29、ically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection there
30、with. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is wi
31、lling or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter o
32、f Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection wit
33、h submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility.
34、 Further information may be obtained from the IEEE Standards Association.6 Copyright 2018 IEEE. All rights reserved. Participants At the time this IEEE standard was completed, the Corona and Field Effects Working Group had the following membership: Danna Liebhaber, Chair Rob Schaerer, Vice Chair Ton
35、y Baker Stephen Bell Yair Berenstein David Boudreau John Chan Ross Clark Rich Collins Ben Cotts Cody Davis Nicholas DeSantis Michael Dolan Kevin Edmonds Eric Engdahl Namal Fernando Bruce Freimark Nancy Fulk Ravi Ganatra Michael Garrels Jennifer Havel Randy Hopkins Ray McCoy Marc Patterson Teja Rao B
36、rian Reynolds Steve Roberts Andy Schwaim Jens Seifert Tim Shaw Ross Smith Paul Springer Gerald Stewart Timothy V an Remmen Mike Warntjes Kevin Wortmann The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstentio
37、n. Saleman Alibhay Gordon Baker Martin Baur Bryan Beske Jon Brasher Demetrio Bucaneg Jr. Robert Christman Ben Cotts Cody Davis Gary Donner Namal Fernando Michael Garrels George Gela David Gilmer Waymon Goch Edwin Goodwin Randall Groves Ajit Gwal Werner Hoelzl Randy Hopkins Magdi Ishac Jim Kulchisky
38、Chung-Yiu Lam Danna Liebhaber Reginaldo Maniego Thomas McCarthy Michael Newman Nick S.A. Nikjoo Gearold O. H. Eidhin Carl Orde Jan Paramalingam Bansi Patel Marc Patterson Thomas Proios Thomas Rozek Ryandi Ryandi Daniel Sabin Bartien Sayogo Rob Schaerer Jeremy Smith Jerry Smith Gary Smullin K. Stump
39、John V ergis Kenneth White7 Copyright 2018 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this standard on 15 February 2018, it had the following membership: Jean-Philippe Faure, Chair Vacant Position, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Te
40、d Burse Guido R. Hiertz Gary Hoffman Christel Hunter Joseph L. Koepfinger* Thomas Koshy Hung Ling Dong Liu Xiaohui Liu Kevin Lu Daleep Mohla Andrew Myles Paul Nikolich Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Mehmet Ulema Phil Wennblom Philip Winston Howard Wolfman Jingyi Zh
41、ou *Member Emeritus8 Copyright 2018 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 656-2018, IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines. This standard was the result of several years of effort by the Corona Effects Working G
42、roup and its predecessor, the Audible Noise Working Group, of the Corona and Field Effects Subcommittee of the Transmission and Distribution Committee of the IEEE Power Engineering Society. This standard is the direct outgrowth of a report that was prepared by a task force of the subcommittee and pu
43、blished as “Measurement of Audible Noise From Transmission Lines” in IEEE Transactions on Power Apparatus and Systems B8. 1The report is recommended as a tutorial for this standard. The 1992 revision of this standard incorporates minor revisions, based upon application of this standard, and a new an
44、nex that contains the results of work by the Psychoacoustics Task Force on definitions of instrumentation for psychoacoustic testing. The 2018 revision of the standard primarily consists of additional minor revisions throughout and updates related to recording equipment. Additionally, a new informative Annex B was added regarding application of noise measurements primarily relating to regulatory requirements, mitigation techniques, and comparison to ambient noise. 1 The numbers in brackets correspond to those of the bibliography in Annex A.
