1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Acoustics - Field measurement of sound insulation in buildings and of building elementsPart 2: Impact sound insulationBS EN ISO 162832:2018National forewordThis British Standard is the UK implementation of EN ISO 162832
2、:2018. It is identical to ISO 162832:2018. It supersedes BS EN ISO 162832:2015, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EH/1/6, Building acoustics.A list of organizations represented on this committee can be obtained on request to its secretary
3、.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 98878 3ICS 91.060.30; 91.120.20Compliance with a British Standard
4、cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 162832:2018EUROPEAN STANDARDNORME EUROPENN
5、EEUROPISCHE NORMEN ISO 16283-2August 2018ICS 91.060.30; 91.120.20 Supersedes EN ISO 162832:2015EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN Ref. No. EN ISO 162832:2018: EAll
6、 rights of exploitation in any form and by any means reserved worldwide for CEN national MembersAcoustics Field measurement of sound insulation in buildings and of building elements Part 2: Impact sound insulation (ISO 162832:2018)Acoustique Mesurage in situ de lisolation acoustique des btiments et
7、des lments de construction Partie 2: Isolation des bruits dimpacts (ISO 162832:2018)Akustik Messung der Schalldmmung in Gebuden und von Bauteilen am Bau Teil 2: Trittschalldmmung (ISO 162832:2018)This European Standard was approved by CEN on 9 June 2018.CEN members are bound to comply with the CEN/C
8、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Uptodate lists and bibliographical references concerning such national standards may be obtained on application to the CENCENELEC Management Centre o
9、r to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offi
10、cial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
11、Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN ISO 16283-2:2018 (E)European forewordThis document (EN ISO 162832:2018) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with Technica
12、l Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2019, and conf
13、licting national standards shall be withdrawn at the latest by February 2019.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.This document supersedes
14、EN ISO 162832:2015.According to the CENCENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Mace
15、donia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 162832:2018 has been approve
16、d by CEN as EN ISO 162832:2018 without any modification.iiBS EN ISO 162832:2018ISO 16283-2:2018Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 14 Instrumentation 54.1 General . 54.2 Calibration 54.3 Verification . 55 Frequency range . 55.1 Tapping machine as the
17、 impact source 55.2 Rubber ball as the impact source 66 General 67 Default procedure for sound pressure level measurement . 77.1 General . 77.2 Generation of sound field . 77.2.1 General 77.2.2 Impact source positions for the tapping machine as impact source . 77.2.3 Impact source positions for the
18、rubber ball as impact source . 87.3 Fixed microphone positions for the tapping machine or rubber ball as impact source 87.3.1 General 87.3.2 Number of measurements . 87.3.3 Tapping machine operated at more than one position . 87.3.4 Rubber ball operated at more than one position . 97.4 Mechanized co
19、ntinuously moving microphone for the tapping machine as impact source . 97.4.1 General 97.4.2 Number of measurements . 97.4.3 Tapping machine operated at more than one position . 97.5 Manually scanned microphone for the tapping machine as impact source . 97.5.1 General 97.5.2 Number of measurements
20、107.5.3 Tapping machine operated at more than one position 107.5.4 Circle 107.5.5 Helix .107.5.6 Cylindricaltype 107.5.7 Three semicircles .117.6 Minimum distances for microphone positions 117.7 Averaging times for the tapping machine as impact source .127.7.1 Fixed microphone positions 127.7.2 Mech
21、anized continuously moving microphone .127.7.3 Manually scanned microphone 127.8 Calculation of energyaverage sound pressure levels 127.8.1 Fixed microphone positions for the tapping machine as impact source 127.8.2 Mechanized continuously moving microphone and manually scanned microphone for the ta
22、pping machine as impact source 127.8.3 Fixed microphone positions for the rubber ball as impact source 138 Low-frequency procedure for sound pressure level measurement for the tapping machine as impact source 138.1 General 138.2 Generation of sound field 13 ISO 2018 All rights reserved iiiContents P
23、ageBS EN ISO 162832:2018ISO 16283-2:20188.2.1 General. 138.2.2 Impact source positions . 138.3 Microphone positions 138.4 Averaging time . 148.5 Calculation of lowfrequency energyaverage impact sound pressure levels .149 Background noise (default and low-frequency procedure) .159.1 General 159.2 Cor
24、rection to the signal level for background noise 1610 Reverberation time in the receiving room (default and low-frequency procedure) 1610.1 General 1610.2 Generation of sound field 1710.3 Default procedure 1710.4 Lowfrequency procedure 1710.5 Interrupted noise method 1810.6 Integrated impulse respon
25、se method 1811 Conversion to octave bands 1812 Expression of results .1813 Uncertainty 1914 Test report 19Annex A (normative) Impact sources .20Annex B (normative) Requirements for loudspeakers used for reverberation time measurements .26Annex C (informative) Forms for the expression of results .27A
26、nnex D (informative) Additional guidance 31Annex E (informative) Horizontal measurements Examples of suitable impact source and microphone positions.35Annex F (informative) Vertical measurements Examples of suitable impact source and microphone positions 39Bibliography .42iv ISO 2018 All rights rese
27、rvedBS EN ISO 162832:2018ISO 16283-2:2018ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member bo
28、dy interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrote
29、chnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO
30、 documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held resp
31、onsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given
32、 for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principl
33、es in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.This second edition cancels and replaces the first edition (ISO 16283-2:2015), which has been
34、 technically revised.The main changes compared to the previous edition are as follows: amended text in 7.3.2 so that the choice of microphone positions applies to any impact source.A list of all parts in the ISO 16283 series can be found on the ISO website. ISO 2018 All rights reserved vBS EN ISO 16
35、2832:2018ISO 16283-2:2018IntroductionISO 16283 (all parts) describes procedures for field measurements of sound insulation in buildings. Airborne, impact and faade sound insulation are described in ISO 162831, this document (ISO 162832) and ISO 162833, respectively.Field sound insulation measurement
36、s that were described previously in ISO 14041), ISO 14052), and ISO 14073)were a) primarily intended for measurements where the sound field could be considered to be diffuse, and b) not explicit as to whether operators could be present in the rooms during the measurement. ISO 16283 (all parts) diffe
37、rs from ISO 1404, ISO 1405, and ISO 1407 in that:a) it applies to rooms in which the sound field may or may not approximate to a diffuse field;b) it clarifies how operators can measure the sound field using a hand-held microphone or sound level meter;c) it includes additional guidance that was previ
38、ously contained in ISO 140144).NOTE Survey test methods for field measurements of airborne and impact sound insulation are dealt with in ISO 10052.Two impact sources are described: the tapping machine and the rubber ball. These impact sources do not exactly replicate all possible types of real impac
39、ts on floors or stairs in buildings.The tapping machine can be used to assess a variety of light, hard impacts such as footsteps from walkers wearing hardheeled footwear or dropped objects. A single number quantity can be calculated using the rating procedures in ISO 7172. This single number quantit
40、y links the measured impact sound insulation using the tapping machine to subjective assessment of general impacts in dwellings that occur on floors or stairs in a building. The tapping machine is also well-suited to the prediction of impact sound insulation using ISO 12354-2. These two aspects faci
41、litate the specification of impact sound insulation in national building requirements using only measurements with the tapping machine as an impact source.The rubber ball can be used to assess heavy, soft impacts such as from walkers in bare feet or children jumping, as well as quantifying absolute
42、values that can be related to human disturbance in terms of a Fast timeweighted maximum sound pressure level. Calculation procedures for a single number quantity do not currently exist in an International Standard.1) Withdrawn.2) Withdrawn.3) Withdrawn.4) Withdrawn.vi ISO 2018 All rights reservedBS
43、EN ISO 162832:2018Acoustics - Field measurement of sound insulation in buildings and of building elements Part 2: Impact sound insulation1 ScopeThis document specifies procedures to determine the impact sound insulation using sound pressure measurements with an impact source operating on a floor or
44、stairs in a building. These procedures are intended for room volumes in the range from 10 m3to 250 m3in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess and compare the impact sound insulation in unfurnished or furnished rooms where the sound field can app
45、roximate to a diffuse field.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the ref
46、erenced document (including any amendments) applies.ISO 33822, Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary roomsISO 129991, Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulationISO 17025, Gener
47、al requirements for the competence of testing and calibration laboratoriesISO 18233, Acoustics Application of new measurement methods in building and room acousticsIEC 60942, Electroacoustics Sound calibratorsIEC 61183, Electroacoustics Random-incidence and diffuse-field calibration of sound level m
48、etersIEC 61260 (all parts), Electroacoustics Octave-band and fractional-octave-band filtersIEC 616721, Electroacoustics Sound level meters Part 1: Specifications3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminological dat
49、abases for use in standardization at the following addresses: ISO Online browsing platform: available at https:/www.iso.org/obp IEC Electropedia: available at http:/www.electropedia.org/INTERNATIONAL STANDARD ISO 16283-2:2018 ISO 2018 All rights reserved 1BS EN ISO 162832:2018ISO 16283-2:20183.1energy-average impact sound pressure level in a roomLiten times the common logarithm of the ratio of the space and time average of the squared sound pressure to the square of the
