1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Reed switchesPart 1-1: Generic specification Blank detail specification (IEC 62246-1-1:2018)BS EN IEC 62246-1-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62246-1-1 April 2018 ICS 29.120.70 Supersedes
2、EN 62246-1-1:2013 English Version Reed switches - Part 1-1: Generic specification - Blank detail specification (IEC 62246-1-1:2018) Contacts lames souples - Partie 1-1: Spcification gnrique - Spcification particulire-cadre (IEC 62246-1-1:2018) Reedschalter - Teil 1-1: Fachgrundspezifikation - Vordru
3、ck fr Bauartspezifikation (IEC 62246-1-1:2018) This European Standard was approved by CENELEC on 2018-03-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any al
4、teration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other langua
5、ge made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the C
6、zech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
7、 United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by an
8、y means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62246-1-1:2018 E National forewordThis British Standard is the UK implementation of EN IEC 62246-1-1:2018. It is identical to IEC 62246-1-1:2018. It supersedes BS EN 62246-1-1:2013, which is withdrawn.The UK participation in its prepara
9、tion was entrusted to Technical Committee EPL/94, General purpose relays and reed contact units.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are respons
10、ible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93146 8ICS 29.120.70Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards
11、 Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 62246-1-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62246-1-1 April 2018 ICS 29.120.70 Supersedes EN 62246-1-1:2013 English Version Reed switch
12、es - Part 1-1: Generic specification - Blank detail specification (IEC 62246-1-1:2018) Contacts lames souples - Partie 1-1: Spcification gnrique - Spcification particulire-cadre (IEC 62246-1-1:2018) Reedschalter - Teil 1-1: Fachgrundspezifikation - Vordruck fr Bauartspezifikation (IEC 62246-1-1:2018
13、) This European Standard was approved by CENELEC on 2018-03-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographica
14、l references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili
15、ty of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, For
16、mer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Elect
17、rotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Member
18、s. Ref. No. EN IEC 62246-1-1:2018 E BS EN IEC 62246-1-1:2018EN IEC 62246-1-1:2018 (E) 2 European foreword The text of document 94/426/FDIS, future edition 2 of IEC 62246-1-1, prepared by IEC/TC 94 “All-or-nothing electrical relays“ was submitted to the IEC-CENELEC parallel vote and approved by CENEL
19、EC as EN IEC 62246-1-1:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-12-13 latest date by which the national standards conflicting with the document have to
20、be withdrawn (dow) 2021-03-13 This document supersedes EN 62246-1-1:2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The
21、text of the International Standard IEC 62246-1-1:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-1:2013 NOTE Harmonized as EN 60068-1:2014 (not modifie
22、d). IEC 60068-2-1:2007 NOTE Harmonized as EN 60068-2-1:2007 (not modified). IEC 60068-2-2:2007 NOTE Harmonized as EN 60068-2-2:2007 (not modified). IEC 60068-2-7:1983 NOTE Harmonized as EN 60068-2-7:1993 (not modified). IEC 60068-2-11:1981 NOTE Harmonized as EN 60068-2-11:1999 (not modified). IEC 60
23、068-2-13:1983 NOTE Harmonized as EN 60068-2-13:1999 (not modified). IEC 60068-2-27:2008 NOTE Harmonized as EN 60068-2-27:2009 (not modified). IEC 60068-2-30:2005 NOTE Harmonized as EN 60068-2-30:2005 (not modified). IEC 60947-5-1:2017 NOTE Harmonized as EN 60947-5-1:2017 (not modified). IEC 60947-5-
24、2:2007 NOTE Harmonized as EN 60947-5-2:2007 (not modified). IEC 60947-5-3:2013 NOTE Harmonized as EN 60947-5-3:2013 (not modified). IEC 61508-4:2010 NOTE Harmonized as EN 61508-4:2010 (not modified). IEC 61810-1:2015 NOTE Harmonized as EN 61810-1:2015 (not modified). IEC 61811-1 NOTE Harmonized as E
25、N 61811-1. ISO 14119:2013 NOTE Harmonized as EN ISO 14119:2013 (not modified). BS EN IEC 62246-1-1:2018EN IEC 62246-1-1:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the tex
26、t in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has b
27、een modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-2-6 2007 Environmental testing - Pa
28、rt 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 2008 IEC 60068-2-11 1981 Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist EN 60068-2-11 1999 IEC 60068-2-14 2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 2009 IEC
29、60068-2-17 1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing EN 60068-2-17 1994 IEC 60068-2-20 2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads EN 60068-2-20 2008 IEC 60068-2-2
30、1 2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices EN 60068-2-21 2006 IEC 60068-2-78 2012 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 2013 IEC 60127-2 2014 Miniature fuses - Part 2: Cartrid
31、ge fuse-links EN 60127-2 2014 IEC 61373 2010 Railway applications - Rolling stock equipment - Shock and vibration tests EN 61373 2010 IEC 61810-2 2017 Electromechanical elementary relays - Part 2: Reliability EN 61810-2 2017 IEC 61810-2-1 2017 Electromechanical elementary relays - Part 2-1: Reliabil
32、ity - Procedure for the verification of B10 values EN 61810-2-1 2017 IEC 62246-1 2015 Reed switches - Part 1: Generic specification EN 62246-1 2015 ISO 2859-1 1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot ins
33、pection - - BS EN IEC 62246-1-1:2018This page deliberately left blankIEC 62246-1-1 Edition 2.0 2018-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Reed switches Part 1-1: Generic specification Blank detail specification Contacts lames souples Partie 1-1: Spcification gnrique Spcification particulire
34、-cadre INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.120.70 ISBN 978-2-8322-5337-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained th
35、is publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. IEC 62246-1-1 Edition 2.0 2018-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Reed switches Part 1-1: Generic specification Blank detail specification Conta
36、cts lames souples Partie 1-1: Spcification gnrique Spcification particulire-cadre INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.120.70 ISBN 978-2-8322-5337-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commiss
37、ion Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinsideBS EN IEC 62246-1-1:2018 2 IEC 62246-1-1:2018 IEC 2018 CONTENTS FOREW
38、ORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 3.1 reed switch types 8 3.2 tests . 8 3.3 inspection . 9 3.4 safety and failure modes . 9 4 Test schedules 10 4.1 General . 10 4.2 Order of tests 10 4.3 Test groups and subgroups . 10 4.4 Type test . 10 4.5 Quality
39、 conformance inspection 10 4.6 Formation of inspection lots 10 4.7 Periodic test 11 4.8 Periodic test intervals between tests . 11 4.9 Standard conditions for testing 11 4.10 Mounting of test specimens during the test . 11 4.11 General conditions for testing . 11 5 Characteristic values of the reed
40、switches . 37 5.1 Contact data . 37 5.1.1 Failure criteria . 37 5.1.2 Static contact-circuit resistance . 41 5.1.3 Mechanical endurance . 42 5.1.4 Final dielectric test 42 5.2 Environmental data . 42 5.3 Reliability Failure rate data 42 6 Marking and documentation . 42 6.1 General . 42 6.2 Marking o
41、f the reed switch 43 6.3 Marking of the packaging 43 6.4 Coded date of manufacturer 43 7 Preparation of blank detail and detail specification 43 Annex A (normative) Mounting in a standard coil . 45 Annex B (normative) Variants 46 Annex C (informative) Typical applications . 47 Annex D (informative)
42、Examples of blank detail and detail specifications . 48 D.1 Key to front page 48 D.2 Examples of blank detail specifications . 49 D.2.1 Blank detail specification (1) 49 D.2.2 Blank detail specification (2) 50 D.2.3 Blank detail specification (3) 51 D.2.4 Blank detail specification (4) 52 BS EN IEC
43、62246-1-1:2018IEC 62246-1-1:2018 IEC 2018 3 D.2.5 Blank detail specification (5) 53 D.2.6 Blank detail specification (6) 54 D.2.7 Blank detail specification (7) 55 D.2.8 Blank detail specification (8) 56 D.2.9 Blank detail specification (9) 57 D.2.10 Blank detail specification (10) 58 D.2.11 Blank d
44、etail specification (11) 59 D.2.12 Blank detail specification (12) 60 Bibliography 61 Figure A.1 Switch direction and position in a standard coil . 45 Table 1 Test procedure of quality assessment . 12 Table 2 Sampling and test schedule of type test (1 of 5) 14 Table 3 Sampling and test schedule of t
45、ype test (grouping) . 27 Table 4 Quality conformance inspection (1 of 7). 29 Table 5 Variant A of reed switches (1 of 2). 37 Table 6 Variant A of heavy-duty reed switches (1 of 2). 39 Table 7 Variant B of heavy-duty reed switches . 41 Table 8 Environmental data for reed switches 42 Table 9 Reliabili
46、ty data for reed switches . 42 BS EN IEC 62246-1-1:2018 4 IEC 62246-1-1:2018 IEC 2018 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ REED SWITCHES Part 1-1: Generic specification Blank detail specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for s
47、tandardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes
48、 International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may parti
49、cipate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
