1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06ElectrostaticsPart 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a personBS EN IEC 61340-4-5:2018EUROPEAN STA
2、NDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 61340-4-5 March 2018 ICS 17.220.99; 59.080.60 Supersedes EN 61340-4-5:2004 English Version Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in com
3、bination with a person (IEC 61340-4-5:2018) Electrostatique - Partie 4-5: Mthodes dessai normalises pour des applications spcifiques - Mthodes de caractrisation de la protection lectrostatique des chaussures et des revtements de sol par rapport une personne (IEC 61340-4-5:2018) Elektrostatik - Teil
4、4-5: Standard-Prfverfahren fr spezielle Anwendungen - Verfahren zur Charakterisierung der elektrostatischen Schutzwirkung von Schuhwerk und Boden in Kombination mit einer Person (IEC 61340-4-5:2018) This European Standard was approved by CENELEC on 2018-02-22. CENELEC members are bound to comply wit
5、h the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manag
6、ement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
7、same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
8、Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elek
9、trotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61340-4-5:2018 E National forewordThis British Standard is the UK implementation of
10、EN IEC 61340-4-5:2018. It is identical to IEC 61340-4-5:2018. It supersedes BS EN 61340-4-5:2004, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/101, Electrostatics.A list of organizations represented on this committee can be obtained on request t
11、o its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 91542 0ICS 29.020; 97.150; 17.220.99Compliance with
12、 a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 61340-4-5:2018EUROPEAN S
13、TANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 61340-4-5 March 2018 ICS 17.220.99; 59.080.60 Supersedes EN 61340-4-5:2004 English Version Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in c
14、ombination with a person (IEC 61340-4-5:2018) Electrostatique - Partie 4-5: Mthodes dessai normalises pour des applications spcifiques - Mthodes de caractrisation de la protection lectrostatique des chaussures et des revtements de sol par rapport une personne (IEC 61340-4-5:2018) Elektrostatik - Tei
15、l 4-5: Standard-Prfverfahren fr spezielle Anwendungen - Verfahren zur Charakterisierung der elektrostatischen Schutzwirkung von Schuhwerk und Boden in Kombination mit einer Person (IEC 61340-4-5:2018) This European Standard was approved by CENELEC on 2018-02-22. CENELEC members are bound to comply w
16、ith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Man
17、agement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has th
18、e same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia
19、, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr El
20、ektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61340-4-5:2018 E BS EN IEC 61340-4-5:2018EN IEC 61340-4-5:2018 (E) 2 European fore
21、word The text of document 101/545/FDIS, future edition 2 of IEC 61340-4-5, prepared by IEC/TC 101 “Electrostatics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61340-4-5:2018. The following dates are fixed: latest date by which the document has to be implemented a
22、t national level by publication of an identical national standard or by endorsement (dop) 2018-11-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-02-22 This document supersedes EN 61340-4-5:2004. Attention is drawn to the possibility that
23、some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61340-4-5:2018 was approved by CENELEC as a European Standard without any modi
24、fication. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 61340-4-3 NOTE Harmonized as EN IEC 61340-4-3. BS EN IEC 61340-4-5:2018EN IEC 61340-4-5:2018 (E) 3 Annex ZA (normative) Normative references to international publications with the
25、ir corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced doc
26、ument (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.ce
27、nelec.eu. Publication Year Title EN/HD Year IEC 61340-4-1 - Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors EN 61340-4-1 - IEC 62631-3-1 - Dielectric and resistive properties of solid insulating materials - Pa
28、rt 3-1 Determination of resistive properties (DC methods) - Volume resistance and volume resistivity, general method EN 62631-3-1 - ISO 1957 - Machine-made textile floor coverings_- Selection and cutting of specimens for physical tests - - BS EN IEC 61340-4-5:2018This page deliberately left blank 2
29、IEC 61340-4-5:2018 IEC 2018 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Principle 5 5 Atmosphere for conditioning and testing 6 6 Test methods for footwear and flooring in combination with a person . 6 6.1 Floor covering sampling and specimen preparation for
30、laboratory tests . 6 6.2 Cleaning of footwear for laboratory evaluations and for test on installed floor coverings 7 6.2.1 General . 7 6.2.2 Cleaning materials . 7 6.2.3 Cleaning procedure . 7 6.3 Measurement of electrical resistance 7 6.3.1 Apparatus 7 6.3.2 Test procedure 8 6.4 Measurement of char
31、geability . 11 6.4.1 Apparatus 11 6.4.2 Test procedure 11 6.4.3 Calculation and expression of results. 12 7 Test report . 14 Annex A (normative) Method of verification of body voltage measuring system 16 A.1 Static verification 16 A.2 Dynamic verification 16 A.2.1 General . 16 A.2.2 Signal generator
32、 method 16 A.2.3 Manual switching method. 16 Annex B (informative) Alternative walking pattern 17 B.1 Measurement of chargeability . 17 B.2 Walking . 17 Bibliography 18 Figure 1 Set-ups for measuring electrical resistance of footwear and flooring in combination with a person 10 Figure 2 Examples of
33、body voltage recordings showing points used in calculating mean values . 14 Figure B.1 Description of walking pattern . 17 2 IEC 61340-4-5:2018 IEC 2018 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Principle 5 5 Atmosphere for conditioning and testing 6 6 Test
34、 methods for footwear and flooring in combination with a person . 6 6.1 Floor covering sampling and specimen preparation for laboratory tests . 6 6.2 Cleaning of footwear for laboratory evaluations and for test on installed floor coverings 7 6.2.1 General . 7 6.2.2 Cleaning materials . 7 6.2.3 Clean
35、ing procedure . 7 6.3 Measurement of electrical resistance 7 6.3.1 Apparatus 7 6.3.2 Test procedure 8 6.4 Measurement of chargeability . 11 6.4.1 Apparatus 11 6.4.2 Test procedure 11 6.4.3 Calculation and expression of results. 12 7 Test report . 14 Annex A (normative) Method of verification of body
36、 voltage measuring system 16 A.1 Static verification 16 A.2 Dynamic verification 16 A.2.1 General . 16 A.2.2 Signal generator method 16 A.2.3 Manual switching method. 16 Annex B (informative) Alternative walking pattern 17 B.1 Measurement of chargeability . 17 B.2 Walking . 17 Bibliography 18 Figure
37、 1 Set-ups for measuring electrical resistance of footwear and flooring in combination with a person 10 Figure 2 Examples of body voltage recordings showing points used in calculating mean values . 14 Figure B.1 Description of walking pattern . 17 BS EN IEC 61340-4-5:2018IEC 61340-4-5:2018 IEC 2018
38、3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROSTATICS Part 4-5: Standard test methods for specific applications Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person FOREWORD 1) The International Electrotechnical Commission (IEC) is a wo
39、rldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other
40、 activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the su
41、bject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions d
42、etermined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Co
43、mmittees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in wh
44、ich they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Public
45、ation and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is n
46、ot responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its techn
47、ical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
48、Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subjec
49、t of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61340-4-5 has been prepared by IEC technical committee 101: Electrostatics. This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) normative references have been updated; b) Figure 2 has
