1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Optical amplifiersPart 1: Generic specificationBS EN IEC 612911:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 61291-1 April 2018 ICS 33.180.30 Supersedes EN 61291-1:2012 English Version Optical amplifiers
2、 - Part 1: Generic specification (IEC 61291-1:2018) Amplificateurs optiques - Partie 1: Spcification gnrique (IEC 61291-1:2018) Lichtwellenleiter-Verstrker - Teil 1: Fachgrundspezifikation (IEC 61291-1:2018) This European Standard was approved by CENELEC on 2018-03-27. CENELEC members are bound to c
3、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENE
4、LEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
5、 has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
6、 Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komite
7、e fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61291-1:2018 E National forewordThis British Standard is the UK implementat
8、ion of EN IEC 612911:2018. It is identical to IEC 612911:2018. It supersedes BS EN 612911:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/86/3, Fibre optic systems and active devices.A list of organizations represented on this committee can b
9、e obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 96999 7ICS 33.180.30; 33.180
10、.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 612911
11、:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 61291-1 April 2018 ICS 33.180.30 Supersedes EN 61291-1:2012 English Version Optical amplifiers - Part 1: Generic specification (IEC 61291-1:2018) Amplificateurs optiques - Partie 1: Spcification gnrique (IEC 61291-1:2018) Lichtwellenleite
12、r-Verstrker - Teil 1: Fachgrundspezifikation (IEC 61291-1:2018) This European Standard was approved by CENELEC on 2018-03-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standa
13、rd without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in
14、 any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croat
15、ia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerlan
16、d, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in a
17、ny form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61291-1:2018 E BS EN IEC 612911:2018EN IEC 61291-1:2018 (E) 2 European foreword The text of document 86C/1460/CDV, future edition 4 of IEC 61291-1, prepared by IEC/SC 86C “Fibre optic systems and active devices“ of IEC/
18、TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61291-1:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-1
19、2-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-03-27 This document supersedes EN 61291-1:2012. This edition includes the following significant technical changes with respect to the previous edition: a) terms have been added for paramete
20、rs from IEC 61290-4-3 and IEC 61290-10-5; b) Clause 4 Classification has been removed, since this system is judged to be unused; c) the definition of polarization mode dispersion (PMD) has been simplified. Attention is drawn to the possibility that some of the elements of this document may be the su
21、bject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61291-1:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography,
22、the following notes have to be added for the standards indicated: IEC 60793-2 NOTE Harmonized as EN 60793-2. IEC 60825-1 NOTE Harmonized as EN 60825-1. IEC 60825-2 NOTE Harmonized as EN 60825-2. IEC 60874-1 NOTE Harmonized as EN 60874-1. IEC 61000 series NOTE Harmonized as EN 61000 series. IEC 61290
23、-1 series NOTE Harmonized as EN 61290-1 series.1IEC 61290-3 NOTE Harmonized as EN 61290-3. IEC 61291 series NOTE Harmonized as EN 61291 series. 1Withdrawn. BS EN IEC 612911:2018EN IEC 61291-1:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding
24、European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including
25、any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publica
26、tion Year Title EN/HD Year IEC 60050-731 - International Electrotechnical Vocabulary - Chapter 731: Optical fibre communication - - IEC 61290 series Optical amplifiers - Test methods EN 61290 series IEC 61290-1-1 - Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spe
27、ctrum analyzer method EN 61290-1-1 - IEC 61290-1-2 - Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method EN 61290-1-2 - IEC 61290-1-3 - Optical amplifiers - Test methods - Part 1-3: Optical power and gain parameters - Optical power meter meth
28、od EN 61290-1-3 - IEC 61290-3-1 - Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method EN 61290-3-1 - IEC 61290-3-2 - Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method EN 61290-3-2 - IEC 612
29、90-4-1 - Optical amplifiers - Test methods - Part 4-1: Gain transient parameters Two wavelength method EN 61290-4-1 - IEC 61290-4-2 - Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method EN 61290-4-2 - IEC 61290-4-3 - Optical amplifiers - Test methods - P
30、art 4-3: Power transient parameters - Single channel optical amplifiers in output power control EN 61290-4-3 - IEC 61290-5-1 - Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method EN 61290-5-1 - IEC 61290-5-2 - Optical amplifiers - Test methods - Pa
31、rt 5-2: Reflectance parameters - Electrical spectrum analyser method EN 61290-5-2 - IEC 61290-5-3 - Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser EN 61290-5-3 - IEC 61290-6-1 - Optical
32、fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer EN 61290-6-1 - BS EN IEC 612911:2018EN IEC 61291-1:2018 (E) 4 IEC 61290-7-1 - Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter
33、method EN 61290-7-1 - IEC 61290-10-1 - Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyser EN 61290-10-1 - IEC 61290-10-2 - Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method us
34、ing a gated optical spectrum analyzer EN 61290-10-2 - IEC 61290-10-3 - Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods EN 61290-10-3 - IEC 61290-10-4 - Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction meth
35、od using an optical spectrum analyzer EN 61290-10-4 - IEC 61290-10-5 - Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure EN 61290-10-5 - IEC 61290-11-1 - Optical amplifier - Test methods - Part 11-1: Polarization mode dispersio
36、n parameter - Jones matrix eigenanalysis (JME) EN 61290-11-1 - IEC 61290-11-2 - Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincar sphere analysis method EN 61290-11-2 - IEC 61291-5-2 - Optical amplifiers - Part 5-2: Qualification specifications - Reliabi
37、lity qualification for optical fibre amplifiers EN 61291-5-2 - IEC/TR 61931 - Fibre optic - Terminology - - BS EN IEC 612911:2018 2 IEC 61291-1:2018 IEC 2018 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviated terms 6 3.1 Overview. 6 3.2 Terms and definition
38、s 8 3.2.1 OA devices and distributed amplifiers 9 3.2.2 OA assemblies 23 3.3 Abbreviated terms . 26 4 Requirements 26 4.1 Preferred values . 27 4.2 Sampling. 27 4.3 Product identification for storage and shipping 27 4.3.1 Marking . 27 4.3.2 Labelling 27 4.3.3 Packaging 27 5 Quality assessment . 27 6
39、 Electromagnetic compatibility (EMC) requirements 27 7 Test methods . 27 Bibliography 29 Figure 1 OA device and assemblies . 7 Figure 2 Optical amplifier in a multichannel application 8 Table 1 Grouping of parameters and corresponding test methods or references 28 BS EN IEC 612911:2018IEC 61291-1:20
40、18 IEC 2018 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL AMPLIFIERS Part 1: Generic specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). Th
41、e object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specif
42、ications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations
43、liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters ex
44、press, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Comm
45、ittees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Natio
46、nal Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does
47、not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have
48、 the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoe
49、ver, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publ
