1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Universal serial bus interfaces for data and powerPart 1-3: Common components USB Type-CTM Cable and Connector Specification (IEC 62680-1-3:2017)BS EN 62680-1-3:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6
2、2680-1-3 December 2017 ICS 33.120.20; 33.120.30; 35.200 Supersedes EN 62680-1-3:2016 English Version Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification (IEC 62680-1-3:2017) Interfaces de bus universel en srie pour les don
3、nes et lalimentation lectrique - Partie 1-3: Composants communs - Spcification des cbles et connecteurs USB de type CTM (IEC 62680-1-3:2017) Schnittstellen des Universellen Seriellen Busses fr Daten und Energie - Teil 1-3: Gemeinsame Bauteile - Festlegung fr USB-Typ-CTM-Kabel und -Steckverbinder (IE
4、C 62680-1-3:2017) This European Standard was approved by CENELEC on 2017-10-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists an
5、d bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under
6、the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Eston
7、ia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Com
8、mittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide fo
9、r CENELEC Members. Ref. No. EN 62680-1-3:2017 E National forewordThis British Standard is the UK implementation of EN 62680-1-3:2017. It is identical to IEC 62680-1-3:2017. It supersedes BS EN 62680-1-3:2016, which is withdrawn.The UK participation in its preparation was entrusted to Technical Commi
10、ttee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application
11、. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 96675 0ICS 33.120.20; 33.120.30; 35.200Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and S
12、trategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62680-1-3:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62680-1-3 December 2017 ICS 33.120.20; 33.120.30; 35.200 Supersedes EN 62680-1-3:2016 English Version Univers
13、al serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification (IEC 62680-1-3:2017) Interfaces de bus universel en srie pour les donnes et lalimentation lectrique - Partie 1-3: Composants communs - Spcification des cbles et connecteurs USB
14、de type CTM (IEC 62680-1-3:2017) Schnittstellen des Universellen Seriellen Busses fr Daten und Energie - Teil 1-3: Gemeinsame Bauteile - Festlegung fr USB-Typ-CTM-Kabel und -Steckverbinder (IEC 62680-1-3:2017) This European Standard was approved by CENELEC on 2017-10-30. CENELEC members are bound to
15、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CE
16、NELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Cent
17、re has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital
18、y, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komi
19、tee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62680-1-3:2017 E BS EN 62680-1-3:2017EN 62680-1-3:2017 (E) 2 European forewor
20、d The text of document 100/2853/CDV, future edition 2 of IEC 62680-1-3, prepared by Technical Area 14 “Interfaces and methods of measurement for personal computing equipment“, of IEC/TC 100 “Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approve
21、d by CENELEC as EN 62680-1-3:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-07-30 latest date by which the national standards conflicting with the document ha
22、ve to be withdrawn (dow) 2020-10-30 This document supersedes EN 62680-1-3:2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notic
23、e The text of the International Standard IEC 62680-1-3:2017 was approved by CENELEC as a European Standard without any modification. BS EN 62680-1-3:2017 2 IEC 62680-1-3:2017 IEC 2017 USB-IF:2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER Part 1-3:
24、 Common components USB Type-CTMCable and Connector Specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote internationa
25、l co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter refer
26、red to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in
27、this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internati
28、onal consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable
29、 efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publ
30、ications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity.
31、 Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7
32、) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for co
33、sts (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct appli
34、cation of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62680-1-3 has been prepared by techn
35、ical area 14: Interfaces and methods of measurement for personal computing equipment, of IEC technical committee 100: Audio, video and multimedia systems and equipment. This second edition cancels and replaces the first edition published in 2016 and constitutes a technical revision. The text of this
36、 standard was prepared by the USB Implementers Forum (USB-IF). The structure and editorial rules used in this publication reflect the practice of the organization which submitted it. BS EN 62680-1-3:2017IEC 62680-1-3:2017 IEC 2017 3 USB-IF:2016 The text of this standard is based on the following doc
37、uments: CDV Report on voting 100/2853/CDV 100/2958/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The committee has decided that the contents of this publication will remain unchanged until the stability date in
38、dicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it
39、 contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 62680-1-3:2017 4 IEC 62680-1-3:2017 IEC 2017 USB-IF:2016 INTRODUCTION The IEC 62680 series is based on a series of specification
40、s that were originally developed by the USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the auspices of a special agreement between the IEC and the USB-IF. This standard is the USB-IF publication USB Type-C Cable and Connector Specification Revision 1.2 as of Ma
41、rch 25, 2016. The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide a support organization and forum for the advancement and adoption of Universal Serial Bus techn
42、ology. The Forum facilitates the development of high-quality compatible USB peripherals (devices), and promotes the benefits of USB and the quality of products that have passed compliance testing. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRAN
43、TY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS SPECIF
44、ICAITON. THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. Entering into USB Adopters Agreements may, however, allow a signing company to participate in a reciprocal, RAND-Z licensi
45、ng arrangement for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/www.usb.org/developers/devclass_docs#approved IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB
46、IMPLEMENTERS FORUM.” BS EN 62680-1-3:2017BS EN 62680-1-3:2017IEC 62680-1-3:2017 IEC 2017 5 USB-IF:2016 Copyright 2016 USB 3.0 Promoter Group. All rights reserved. Universal Serial Bus Type-C Cable and Connector Specification Revision 1.2 March 25, 2016 BS EN 62680-1-3:2017 6 IEC 62680-1-3:2017 IEC 2
47、017 USB-IF:2016 Copyright 2016 USB 3.0 Promoter Group. All rights reserved. Copyright 2014-2016, USB 3.0 Promoter Group: Hewlett-Packard Company, Intel Corporation, Microsoft Corporation, Renesas, STMicroelectronics, and Texas Instruments All rights reserved. NOTE: Adopters may only use the USB Type
48、-C cable and connector to implement USB or third party functionality as expressly described in this Specification; all other uses are prohibited. LIMITED COPYRIGHT LICENSE: The USB 3.0 Promoters grant a conditional copyright license under the copyrights embodied in the USB Type-C Cable and Connector
49、 Specification to use and reproduce the Specification for the sole purpose of, and solely to the extent necessary for, evaluating whether to implement the Specification in products that would comply with the specification. Without limiting the foregoing, use of the Specification for the purpose of filing or modifying any patent application to target the Specification or USB compliant products is not authorized. Except for this express copyright license, no other rights o
