1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Household and similar electric appliances Methods for measuring the performance of tumble dryers intended for commercial useBS EN 50594:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50594 July 2018 ICS 97.060
2、 Supersedes CLC/TS 50594:2015 English Version Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use Appareils lectrodomestiques et analogues - Mthodes de mesure de laptitude la fonction pour les sche-linge tambour usage commerc
3、ial Elektrische Gerte fr den Hausgebrauch und hnliche Zwecke - Verfahren zur Messung der Gebrauchseigenschaften fr Wschetrockner fr den gewerblichen Gebrauch This European Standard was approved by CENELEC on 2018-04-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations wh
4、ich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. Th
5、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN
6、ELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherl
7、ands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Managem
8、ent Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50594:2018 E National forewordThis British Standard is the UK implementation of EN 50594:2018. It supersedes PD CLC/TS 50594:2015
9、, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee CPL/59/1, Dishwashers and washing machines.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessar
10、y provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 95853 3ICS 97.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publ
11、ished under the authority of the Standards Policy and Strategy Committee on 31 July 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 50594:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50594 July 2018 ICS 97.060 Supersedes CLC/TS 50594:2015 Englis
12、h Version Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use Appareils lectrodomestiques et analogues - Mthodes de mesure de laptitude la fonction pour les sche-linge tambour usage commercial Elektrische Gerte fr den Hausgeb
13、rauch und hnliche Zwecke - Verfahren zur Messung der Gebrauchseigenschaften fr Wschetrockner fr den gewerblichen Gebrauch This European Standard was approved by CENELEC on 2018-04-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giv
14、ing this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three
15、 official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electr
16、otechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Roma
17、nia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-
18、1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50594:2018 E BS EN 50594:2018EN 50594:2018 (E) 2 Contents Page European foreword . 5 1 Scope 6 2 Normative references . 6 3 Terms, definitions and symbols 6 3.1 Term
19、s and definitions 6 3.2 List of symbols 8 4 Requirements 10 4.1 General 10 4.2 Rated capacity 11 4.3 Dimensions . 11 5 Test conditions, materials, equipment and instrumentation 12 5.1 General 12 5.2 Ambient conditions 12 5.2.1 Electricity supply . 12 5.2.2 Water supply . 12 5.2.3 Ambient temperature
20、 and humidity . 13 5.3 Test materials 13 5.3.1 General 13 5.3.2 Test load . 13 5.3.3 Detergent 13 5.4 Equipment . 13 5.4.1 Equipment for normalization . 13 5.4.2 Equipment for conditioning the test load . 14 5.4.3 Equipment for wetting the test load prior to a test 14 5.4.4 Equipment for measurement
21、 . 14 5.5 Instrumentation and accuracy . 15 6 Preparation for testing 15 6.1 General 15 6.2 Test specifications from manufacturers 15 6.3 Installation of the tumble dryer 16 6.4 Preparation of the tumble dryer for a test series . 16 6.5 Preparation of the tumble dryer for a test run . 16 6.5.1 Gener
22、al 16 6.5.2 Preparation requirements for all heating alternatives except for heat pump equipped tumble dryers 16 6.5.3 Preparation requirements for heat pump equipped tumble dryers . 16 6.6 Preparation of test loads . 17 BS EN 50594:2018EN 50594:2018 (E) 3 6.6.1 General 17 6.6.2 Pre-treatment of new
23、 test load items prior to use . 17 6.6.3 Requirements regarding the age of test load items 17 6.6.4 Normalization of test load items 17 6.6.5 Conditioning of test load items 18 6.6.6 Test load composition . 18 6.6.7 Wetting 21 7 Performance measurements General requirements 21 8 Tests for performanc
24、e 22 8.1 General 22 8.2 Test procedure for performance tests . 22 8.2.1 Test conditions, materials and preparation for testing 22 8.2.2 Test programme 22 8.2.3 Test load . 23 8.2.4 Test procedure 23 8.2.5 Validity of a test run . 23 8.2.6 Validity of a test series 23 8.3 Measurements to determine wa
25、ter and energy consumption and cycle time . 24 8.3.1 General 24 8.3.2 Procedure 24 8.4 Measurements to determine condensation efficiency . 24 8.4.1 General 24 8.4.2 Procedure 24 8.5 Measurements to determine exhaust air volume 25 8.6 Performance measurement at maximum exhaust duct pressure . 25 8.7
26、Measurement of the textile drying temperature 25 9 Assessment of performance 25 9.1 General 25 9.2 Final moisture content of the load . 25 9.3 Total energy 26 9.4 Corrected energy 26 9.5 Corrected water consumption . 27 9.6 Corrected cycle time . 27 9.7 Condensation efficiency 28 9.8 Evaporation cap
27、acity . 28 9.9 Exhaust air volume 29 10 Data to be reported . 29 Annex A (normative) Reference list . 30 Annex B (normative) Exhaust ducts for tumble dryer testing 31 Annex C (informative) Flow diagrams . 35 Annex D (normative) Test report Data to be reported 36 BS EN 50594:2018EN 50594:2018 (E) 4 A
28、nnex E (normative) Procedure to determine test load size where rated capacity is not declared . 40 Annex F (normative) Flexible initial moisture content method 41 Annex G (normative) Performance testing of steam heated tumble dryers 43 Annex H (normative) Performance testing of gas heated tumble dry
29、ers 50 Annex I (informative) Measurement of exhaust air volume 53 Annex J (informative) Measurement of the textile drying temperature . 54 Annex K (normative) Test procedure for a performance test of a cotton dry programme with full load at standard rating conditions . 56 Annex L (normative) Reporti
30、ng of key parameters 64 Bibliography 65 BS EN 50594:2018EN 50594:2018 (E) 5 European foreword This document (EN 50594:2018) has been prepared by CLC/TC 59X “Performance of household and similar electrical appliances”. The following dates are fixed: latest date by which this document has to be implem
31、ented at national level by publication of an identical national standard or by endorsement (dop) 2019-04-23 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2021-04-23 This document supersedes CLC/TS 50594:2015. This document is based on portions
32、of EN 61121:2013. The procedures described in this European Standard are modified substantially compared to the procedures described in EN 61121. Therefore, results of tests according to this European Standard cannot and are bound not to be compared to results of similar procedures of EN 61121. Sign
33、ificant technical differences from EN 61121 are: a) test procedures for tumble dryers of any size on the market; b) test procedure for measuring power consumption also for steam heated and gas heated tumble dryers; c) the introduction of a new type of test load; d) the introduction of a new initial
34、moisture content level. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the E
35、uropean Commission and the European Free Trade Association. BS EN 50594:2018EN 50594:2018 (E) 6 1 Scope This European Standard is applicable to tumble dryers intended to be used by trained users e.g. in hotels, hospitals, factories, in light industry and on farms. It covers tumble dryers declared fo
36、r commercial use in public areas and operated by lay persons e.g. in launderettes, apartment houses and communal laundry rooms. This European Standard covers tumble dryers which use electricity, gas or steam as a heating source. The object is to state and define the principal performance characteris
37、tics of tumble dryers for commercial use of interest to users and to describe standard methods for measuring these characteristics. NOTE It does not apply to transfer tumble dryers or tumble dryers only possible to operate with automatic loading and unloading. 2 Normative references The following do
38、cuments are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 437:2003+A
39、1:2009, Test gases Test pressures Appliance categories CEN/TR 1749:2014, European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) EN 12953-10, Shell boilers Part 10: Requirements for feedwater and boiler water quality EN 50570:
40、2013, Household and similar electrical appliances Safety Particular requirements for commercial electric tumble dryers EN 50640:2018, Clothes washing machines for commercial use Methods for measuring the performance EN 60456:2016, Clothes washing machines for household use Methods for measuring the
41、performance (IEC 60456:2010, modified) EN 60734, Household electrical appliances Performance Water for testing (IEC 60734) EN 62053-21, Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) (IEC 62053-21) ISO 80000-1:2009, Quantities
42、 and units Part 1: General 3 Terms, definitions and symbols 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http
43、:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1.1 tumble dryer appliance in which textiles are dried by tumbling in a rotating drum, through which air is passed 3.1.2 air vented tumble dryer tumble dryer that draws in fresh air which is passed over the te
44、xtiles and where the resulting moist air is exhausted into the room or vented outside BS EN 50594:2018EN 50594:2018 (E) 7 3.1.3 condenser tumble dryer tumble dryer which includes a device for removing moisture from the air used for the drying process 3.1.4 automatic tumble dryer tumble dryer which s
45、witches off the drying process when a certain moisture content of the load is reached Note 1 to entry: This may include systems that use conductivity or temperature sensing. 3.1.5 non-automatic tumble dryer tumble dryer which does not switch off the drying process when a certain moisture content of
46、the load is reached, usually controlled by a timer, but may also be controlled manually 3.1.6 transfer tumble dryer tumble dryer with automatic loading and unloading via conveyors or by other means Note 1 to entry: The loading and unloading conveyers are often located on opposite sides of the drying
47、 basket. 3.1.7 test load textile load used for testing 3.1.8 pre-treatment processing of a new test load prior to its first use to avoid rapid changes of characteristics during the tests 3.1.9 conditioning bringing the test load into thermodynamic equilibrium with the defined ambient air conditions
48、of temperature and humidity Note 1 to entry: The process of conditioning is not the same as wetting which is described in 6.6.7. 3.1.10 test run single performance assessment 3.1.11 test series group of test runs on a tumble dryer which, collectively, are used to assess the performance of that tumbl
49、e dryer 3.1.12 operation performance of a function that occurs during the tumble dryer drying process such as heating up, drying, cooling, anti-creasing 3.1.13 programme series of operations which are pre-defined within the tumble dryer and which are declared by the manufacturer as suitable for drying certain types of textiles 3.1.14 end of cycle when the load is accessible to the user and next programme can be started BS EN 50594:2018EN 50594:2018 (E) 8 3.1.15 cycle complete drying process unt
