1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valveBS EN 17110:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 17110 August 2018 ICS 13.300; 23.020.20; 23.060.99 En
2、glish Version Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve Citernes destines au transport de matires dangereuses - quipement de service - vent de transfert pour collecteur de vapeurs Tanks fr die Befrderung gefhrlicher Gter - Bedienungsausrstung v
3、on Tanks - Be- und Entlftungsventil fr Gassammelleitungen This European Standard was approved by CEN on 23 April 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without
4、any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other lang
5、uage made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmar
6、k, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COM
7、MITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 17110:2018 ENational
8、 forewordThis British Standard is the UK implementation of EN 17110:2018. The UK participation in its preparation was entrusted to Technical Committee AUE/18, Tanks for the transport of dangerous goods.A list of organizations represented on this committee can be obtained on request to its secretary.
9、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 94301 0ICS 23.060.99; 13.300; 23.020.20Compliance with a British St
10、andard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 17110:2018EUROPEAN STANDARD NORME EU
11、ROPENNE EUROPISCHE NORM EN 17110 August 2018 ICS 13.300; 23.020.20; 23.060.99 English Version Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve Citernes destines au transport de matires dangereuses - quipement de service - vent de transfert pour collec
12、teur de vapeurs Tanks fr die Befrderung gefhrlicher Gter - Bedienungsausrstung von Tanks - Be- und Entlftungsventil fr Gassammelleitungen This European Standard was approved by CEN on 23 April 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi
13、ons for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists i
14、n three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standar
15、ds bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovaki
16、a, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any mea
17、ns reserved worldwide for CEN national Members. Ref. No. EN 17110:2018 EBS EN 17110:2018EN 17110:2018 (E) 2 Contents Page European foreword . 3 Introduction 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions 6 4 Functions . 6 5 Design characteristics 7 5.1 General . 7 5.2 5.2. Pressure
18、 and vacuum breathing 7 5.3 Ingress protection 7 5.4 Flow capacity . 7 5.5 Temperature range . 7 5.6 Materials of construction 7 5.7 Dimensional characteristics 7 5.7.1 Maximum dimensions . 7 5.7.2 Flange connection . 8 5.8 Electrical resistance 8 6 Tests 8 6.1 General . 8 6.2 Production tests 8 6.2
19、.1 General 8 6.2.2 Internal seat tightness test 9 6.2.3 Operability test 9 6.3 Type test 9 6.3.1 General 9 6.3.2 Shell strength test .10 6.3.3 Shell tightness test 10 6.3.4 Internal seat tightness test 10 6.3.5 Mechanical endurance test 10 7 Marking .11 8 Installation, operating and maintenance inst
20、ructions .11 Bibliography 12 BS EN 17110:2018EN 17110:2018 (E) 3 European foreword This document (EN 17110:2018) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status o
21、f a national standard, either by publication of an identical text or by endorsement, at the latest by February 2019, and conflicting national standards shall be withdrawn at the latest by February 2019. Attention is drawn to the possibility that some of the elements of this document may be the subje
22、ct of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document forms part of a coherent standards programme (i.e. Tanks for transport of liquid dangerous goods with vapour pressure not exceeding 110 kPa (absolute pressure) at 50 C and petrol - Ser
23、vice equipment). This standards programme comprises the following standards: EN 13081, Tanks for Transport of dangerous goods service equipment for tanks vapour collection adaptor and coupler EN 13082, Tanks for transport of dangerous goods Service equipment for tanks Vapour transfer valve EN 13083,
24、 Tanks for transport of dangerous goods Service equipment for tanks Adaptor for bottom loading and unloading EN 13308, Tanks for transport of dangerous goods Service equipment for tanks Non-pressure balanced footvalve EN 13314, Tanks for transport of dangerous goods Service equipment for tanks Fill
25、hole cover EN 13315, Tanks for transport of dangerous goods Service equipment for tanks Gravity discharge coupler EN 13316, Tanks for transport of dangerous goods Service equipment for tanks Pressure balanced footvalve EN 13317, Tanks for transport of dangerous goods Service equipment for tanks Manh
26、ole cover assembly EN 14595, Tanks for transport of dangerous goods Service equipment Breather device EN 14596, Tanks for transport of dangerous goods Service equipment for tanks Emergency pressure relief valve EN 16249, Tanks for the transport of dangerous goods Service equipment Cap for the adapto
27、r for bottom loading and unloading EN 16257, Tanks for the transport of dangerous goods Service equipment Footvalve sizes other than 100 mm dia. (nom) EN 16522, Tanks for transport of dangerous goods Service equipment for tanks Flame arresters for breather devices BS EN 17110:2018EN 17110:2018 (E) 4
28、 This document includes a Bibliography. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yug
29、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 17110:2018EN 17110:2018 (E) 5 Int
30、roduction The vapour manifold vent valve allows the controlled release of vapour from the vapour manifold and the controlled entry of atmospheric air into the vapour manifold. It may also include a breathing function. BS EN 17110:2018EN 17110:2018 (E) 6 1 Scope This document covers the vapour manifo
31、ld vent valve used to provide controlled venting of the vapour manifold to atmosphere. It specifies the performance requirements and the critical dimensions of the vapour manifold vent valve. It also specifies the tests necessary to verify compliance of the equipment with this document. The service
32、equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR 1 which have a vapour pressure not exceeding 110 kPa at 50 C and petrol, and which have no sub-classification as toxic or corrosive. 2 Normative references The fol
33、lowing documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1
34、2266-1:2012, Industrial valves Testing of metallic valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements EN 12266-2:2012, Industrial valves Testing of metallic valves Part 2: Tests, test procedures and acceptance criteria Supplementary requirements EN 14564, T
35、anks for transport of dangerous goods Terminology ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529) 3 Terms and definit
36、ions For the purposes of this document, the terms and definitions given in EN 14564 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/
37、www.iso.org/obp 4 Functions The vapour manifold vent valve shall provide controlled venting of the vapour manifold; shall be vapour tight when closed; may be provided with a flame arrester; may be self-operating; may be provided with an open/closed indicator; BS EN 17110:2018EN 17110:2018 (E) 7 may
38、provide pressure and vacuum breathing for the vapour manifold. 5 Design characteristics 5.1 General The vapour manifold vent valve shall provide a controlled vapour path between the vapour manifold and atmosphere. The vapour manifold vent valve shall be closed during the process of vapour recovery,
39、both loading and delivery. Self-operating valves shall not compromise the vapour recovery process. Such valves shall be of the resealing type, and shall be designed to prevent unauthorized adjustment of the self-operating mechanism. When not activated the valve shall return automatically to its pass
40、ive state. 5.2 Pressure and vacuum breathing When provided, the pressure and vacuum breathing characteristics shall be: pressure relief opening setting - not to exceed 12 kPa (gauge); vacuum relief opening setting - between 0,8 kPa (gauge) and 2,5 kPa (gauge). 5.3 Ingress protection The vapour manif
41、old vent valve shall be designed, or provision made, to meet the requirements of IP 21 in accordance with EN 60529. 5.4 Flow capacity A flow performance against pressure drop diagram (standard m3/h at 20 C) shall be provided by the manufacturer for pressure and/or vacuum functions. 5.5 Temperature r
42、ange Unless otherwise specified, the design temperature range shall be 20 C to +50 C. Where the vapour manifold vent valve is subjected to more severe conditions, the design temperature range shall be extended to 40 C or +70 C as applicable. 5.6 Materials of construction The manufacturer shall provi
43、de, with the equipment, a full material specification for those parts that may come into contact with the substances described in Clause 1. 5.7 Dimensional characteristics 5.7.1 Maximum dimensions Top mounted valves shall be accommodated within the tank top protection BS EN 17110:2018EN 17110:2018 (
44、E) 8 5.7.2 Flange connection The mounting flange of stand-alone vapour manifold vent valves shall have the following dimensions and the holes shall straddle valve centre-line: Table 1 Dimensions of mounting flange Nominal size (DN) 80 80 / 100 100 Spigot diameter (maximum) 106 mm 106 mm 122 mm Pitch
45、 circle diameter 130 mm 150 mm 150 mm Number of equispaced holes (minimum) 8 (4) 8 (4) 8 (4) Hole diameter (minimum) 12 mm (8 mm) 12 mm (8 mm) 14 mm Tolerances 1 mm 1 mm 1 mm 5.8 Electrical resistance The electrical resistance between any conductive part of the device which may come into contact wit
46、h the dangerous goods and its mounting shall not exceed 1 106. Provision shall be made for the bonding of its mounting to the tank such that the electrical resistance between the two shall not exceed 10 . 6 Tests 6.1 General Two classes of tests are required: production tests and type tests. Test re
47、sults shall be recorded and maintained in accordance with the manufacturers procedures. Testing methods and procedures shall conform to EN 12266-1 and EN 12266-2 except as specified within this document. Unless otherwise specified, test medium shall be air or other suitable gas. The choice of the me
48、dium is the responsibility of the manufacturer. Where the obturator forms part of the pressure containing shell, it may be closed during strength and tightness tests. 6.2 Production tests 6.2.1 General The number, frequency and sampling methods of production test samples shall be not less than those
49、 specified within ISO 2859-1 (AQL of 2,5). Production tests shall comprise the following: internal seat tightness test; and operability test. BS EN 17110:2018EN 17110:2018 (E) 9 6.2.2 Internal seat tightness test 6.2.2.1 Valve design not incorporating breathing function 6.2.2.1.1 Valve classification type (for test method selection only) The valve classification type shall be a check valve as in EN 12266-1:2012, Table A.3 6.2.2.1.
