1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS)BS EN 13497:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM
2、 EN 13497 September 2018 ICS 91.100.60 Supersedes EN 13497:2002English Version Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) Produits isolants thermiques pour le btiment - Dtermination de la
3、rsistance au choc des systmes composites disolation thermique par lextrieur (ETICS) Wrmedmmstoffe fr das Bauwesen - Bestimmung der Schlagfestigkeit von auenseitigen Wrmedmm-Verbundsystemen (WDVS) This European Standard was approved by CEN on 23 April 2018. CEN members are bound to comply with the CE
4、N/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Ce
5、ntre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as t
6、he official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe
7、rlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018
8、 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13497:2018 ENational forewordThis British Standard is the UK implementation of EN 13497:2018. It supersedes BS EN 13497:2002, which is withdrawn.The UK participation in its preparati
9、on was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are
10、 responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 98218 7ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the
11、Standards Policy and Strategy Committee on 30 September 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 13497:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13497 September 2018 ICS 91.100.60 Supersedes EN 13497:2002English Version Thermal insulat
12、ion products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) Produits isolants thermiques pour le btiment - Dtermination de la rsistance au choc des systmes composites disolation thermique par lextrieur (ETICS) Wrmedmmsto
13、ffe fr das Bauwesen - Bestimmung der Schlagfestigkeit von auenseitigen Wrmedmm-Verbundsystemen (WDVS) This European Standard was approved by CEN on 23 April 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar
14、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English,
15、French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulga
16、ria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerl
17、and, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation
18、al Members. Ref. No. EN 13497:2018 EBS EN 13497:2018EN 13497:2018 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Principle . 4 5 Test apparatus 4 5.1 General 4 5.2 Steel ball requirements . 5 5.3 Crack measuring gauge . 5 5.4 Specimen suppo
19、rt . 5 5.5 Optional tube to control descent of steel ball . 5 6 Test specimens . 6 6.1 Preparation of a test specimen 6 6.2 Sealing and conditioning of test specimens . 6 7 Procedure. 7 7.1 Test conditions . 7 7.2 Test procedure . 7 8 Examination and expression of results . 8 9 Accuracy of measureme
20、nt 9 10 Test report . 9 BS EN 13497:2018EN 13497:2018 (E) 3 European foreword This document (EN 13497:2018) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a n
21、ational standard, either by publication of an identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall be withdrawn at the latest by March 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of paten
22、t rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13497:2002. The following table includes the most significant technical changes between both editions. 2002 Version 2018 Version Two impact energy levels 2 J and 10 J with two diffe
23、rent balls possible. ETAG 004 only partly matched Thirteen impact energy levels with five different balls possible. Matches ETAG 004 levels. No 2 J impact energy level anymore Only size and weight of steel balls defined Definition of steel ball material added No definition of measuring device Defini
24、tion of Crack measuring gauge included No definition of specimen support Definition of specimen support included Weak definition of optional tube Precise definition of optional tube Minimum dimensions of test specimen given Minimum distances between impacts defined instead. - More precise descriptio
25、n of conditioning of the test specimens - Second procedure for conditioning added - Figure for second procedure for conditioning added - Detailed description of test procedure - Detailed description of the examination and expression of results - Introduction of hard facts for evaluation, which is th
26、e measurement of crack widths. - Evaluation of cracks well defined - Amended test report Alternative ISO 7892 test possible No alternative test possible This European Standard has been drafted for applications in buildings, but can also be used in other areas where it is relevant. According to the C
27、EN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hung
28、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13497:2018EN 13497:2018 (E) 4 1 Scope This European Standard specifies the equipment and pr
29、ocedure for determining the resistance to impact of design ETICS kits with renders. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited appli
30、es. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1607, Thermal insulating products for building applications Determination of tensile s
31、trength perpendicular to faces EN 16383, Thermal insulation products for building applications Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) EN 17237, Thermal insulation products for buildings External thermal insulation composite s
32、ystems with renders (ETICS) Specification1EN ISO 9229, Thermal insulation Vocabulary (ISO 9229) ISO 3290-1, Rolling bearings Balls Part 1: Steel balls 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 9229 and EN 17237 apply. ISO and IEC maintain te
33、rminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 4 Principle The impact resistance of a design ETICS kit is the hard body impact resistance, determ
34、ined by means of a steel ball falling onto the surface of the kit. The energy level and corresponding dropping height is selected from Table 1. Any damages occurring are visibly assessed (e.g. the reinforcement has become visible from the external surface, the finishing coat or the rendering system
35、has visibly delaminated or been perforated) and cracks widths are measured. 5 Test apparatus 5.1 General For the test a steel ball is dropped from a specified height onto the surface of the test specimen (see Table 1). A second impact (rebound) by the ball shall be avoided. 1To be published. Stage a
36、t the time of publication: prEN 17237:2018. BS EN 13497:2018EN 13497:2018 (E) 5 5.2 Steel ball requirements Balls made of cutlery grade steel, AISI/SE Type 440 C and grade G100 according to ISO 3290-1 with the weights and nominal diameters given in Table 1. 5.3 Crack measuring gauge For measurement
37、of the width of any cracks formed as a result of the impact of the steel ball onto the surface of the test specimen. The gauge shall be capable measuring from 0,1 mm and be graduated in steps of 0,05 mm. 5.4 Specimen support The support itself shall be flat, not bend, deform or absorb impact energy
38、during the test, e.g. concrete support, in order not to influence the test result. The test specimen shall not move or bump during the test. NOTE 1 Larger specimen tends to show less movement than smaller specimen. NOTE 2 The specimen might be fixed, clamped or glued to the support so that contact b
39、etween them is maintained during the test. 5.5 Optional tube to control descent of steel ball A vertical tube manufactured from a metal or rigid plastic can be used for this purpose with an inner diameter at least 2 mm larger than the steel ball diameter. The walls of the tube should preferably incl
40、ude regular perforated holes to prevent air within the tube becoming compressed due to the velocity of the ball during its descent and thereby acting as a “resistance cushion” to the impact of the ball with the specimen surface. Table 1 Impact Energy levels and specified height from the specimen sur
41、face Impact energy J Steel ball nominal diameter mm Steel ball weight kg Specified height from the surface mm 3 50,0 0,499 620 10 63,5 1,022 1 000 15 63,5 1,022 1 500 20 63,5 1,022 2 000 30 80,0 2,088 1 470 40 80,0 2,088 1 960 60 100,0 4,079 1 500 80 100,0 4,079 2 000 100 100,0 4,079 2 500 125 125,0
42、 7,930 1 610 150 125,0 7,930 1 930 175 125,0 7,930 2 250 200 125,0 7,930 2 580 BS EN 13497:2018EN 13497:2018 (E) 6 6 Test specimens 6.1 Preparation of a test specimen The test specimen shall have the size/dimension to allow minimum 5 impacts taking into account the minimum distances according to 7.2
43、. It consists of the thermal insulation product with the rendering system. It shall be prepared according to the system holders instructions. 6.2 Sealing and conditioning of test specimens Sealing and conditioning of test specimen shall be according to procedure 1 or procedure 2 as follows: Procedur
44、e 1: The reverse side and the edges of the test specimen shall be sealed, if exposure to water occurs. Condition the test specimens after preparation as follows: (23 2) C and (50 5) % r. H. for at least 28 days; Conditioning according to EN 16383 test cycles; Drying for at least 7 days at (23 2) C a
45、nd (50 5) % r. H. Procedure 2: The edges of the test specimens shall be sealed. Condition the test specimens after preparation as follows: (23 2) C and (50 5) % r. H. for at least 28 days; Immersion in tap water for at least 7 days at (20 5) C. The depth of submersion over the entire surface shall b
46、e at least 2 mm that is, the distance between levels 6 and 7 in Figure 1; BS EN 13497:2018EN 13497:2018 (E) 7 Dimensions in millimetre Key 1 insulation product 2 reinforcement 3 base coat 4 finishing layer 5 sealing of the test specimen 6 surface of the water 7 level at which the minimum point of ex
47、ternal surface of the finishing layer occurs Figure 1 Minimum depth of submersion of the test specimen for water absorption Drying for at least 7 days at (23 2) C and (50 5) % r. H. 7 Procedure 7.1 Test conditions The test shall be carried out at (20 5) C. 7.2 Test procedure The test specimen shall
48、be placed on a support according to 5.4. The steel ball is dropped from the specified height onto the surface of the test specimen, as determined in Table 1, see Figure 2. For each energy level chosen, five separate impacts are performed at different positions of the test specimen. The minimum dista
49、nce between any impact position and the specimen edges shall be at least 100 mm. The minimum distance between any impact position and the insulation board edges shall be at least 100 mm, i.e. no impact on a joint between insulation boards if more than one board is used to prepare the test specimen. The centre to centre distance between any two impacts shall be at least 100 mm. In case of possible rebound, the steel ball shall be caught or diverted away to avoid a second impact. If a perf
