1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Thermal solar systems and components - Custom built systemsPart 1: General requirements for solar water heaters and combisystemsBS EN 129771:2018National forewordThis British Standard is the UK implementation of EN 1297
2、71:2018. It supersedes BS EN 129771:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee RHE/25, Solar Heating.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to inclu
3、de all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 94198 6ICS 91.140.65; 91.140.10; 27.160Compliance with a British Standard cannot confer immunity from legal o
4、bligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 129771:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 12977-1April 2018ICS 2
5、7.160; 91.140.10; 91.140.65 Supersedes EN 129771:2012EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN Ref. No. EN 129771:2018: EAll rights of exploitation in any form and by any
6、 means reserved worldwide for CEN national MembersThermal solar systems and components Custom built systems Part 1: General requirements for solar water heaters and combisystemsInstallations solaires thermiques et leurs composants Installations assembles faon Partie 1 : Exigences gnrales pour chauff
7、eeau solaires et installations solaires combinesThermische Solaranlagen und ihre Bauteile Kundenspezifisch gefertigte Anlagen - Teil 1: Allgemeine Anforderungen an Solaranlagen zur Trinkwassererwrmung und solare KombianlagenThis European Standard was approved by CEN on 29 October 2017.CEN members ar
8、e bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Uptodate lists and bibliographical references concerning such national standards may be obtained on application to th
9、e CENCENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre
10、 has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
11、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN 12977-1:2018 (E)European foreword 4Introduction . 51 Scope . 72 Normative references 73 Terms and definitions . 84 Symbols and abbrev
12、iations . 95 System classification .105.1 Small custom built systems . 105.2 Large custom built systems . 106 Requirements .106.1 Introduction . 106.2 General 106.2.1 Suitability for drinking water 106.2.2 Water contamination 106.2.3 Freeze resistance 106.2.4 Hightemperature protection. 116.2.5 Reve
13、rse circulation prevention 116.2.6 Pressure resistance .116.2.7 Electrical safety 116.3 Materials 126.4 Components and pipework . 126.4.1 Collector and collector array 126.4.2 Supporting frame .126.4.3 Collector and other loops 126.4.4 Circulation pumps .126.4.5 Expansion vessels 126.4.6 Heat exchan
14、gers 136.4.7 Water store(s) .136.4.8 Pipework 146.4.9 Thermal insulation 146.4.10 Control equipment 146.5 Safety equipment and indicators . 156.5.1 Safety valves 156.5.2 Safety lines and expansion lines 156.5.3 Blowoff lines .156.5.4 Store isolation valve .156.5.5 Indicators 156.6 Installation . 166
15、.6.1 Roof tightness 166.6.2 Lightning 166.6.3 Snow and wind loads 166.7 Initial operation and commissioning 166.8 Documentation 166.8.1 General. 166.8.2 Assortment file for small systems 176.8.3 Documentation for small systems176.8.4 Documentation for large systems 176.9 System performance . 186.10
16、Water wastage 18Annex A (informative) Implementation for Ecodesign and Energy labelling .192Contents PageBS EN 129771:2018EN 12977-1:2018 (E)Annex ZA (informative) Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EC) No 811/2013 ai
17、med to be covered .20Bibliography .21 ISO ISO pubdate year All rights reserved 3BS EN 129771:2018EN 12977-1:2018 (E)European forewordThis document (EN 12977-1:2018) has been prepared by Technical Committee CEN/TC 312 “Thermal solar systems and components”, the secretariat of which is held by ELOT.Th
18、is European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2018, and conflicting national standards shall be withdrawn at the latest by October 2018.Attention is drawn to the possibility that some of t
19、he elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.This document supersedes EN 129771:2012.This document has been prepared under the Mandate M/534 “Standardisation request to the European standardisation o
20、rganisations pursuant to Article 10(1) of Regulation (EU) No 1025/2012 of the European Parliament and of the Council in support of implementation of Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to
21、 ecodesign requirements for water heaters and hot water storage tanks and Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tank
22、s and packages of water heater and solar device” which was given to CEN by the European Commission and the European Free Trade Association.For relationship with EU Directive(s), see informative Annex ZA, ZB and ZC, which are integral parts of this document.EN 12977 is currently composed with the fol
23、lowing parts: Thermal solar systems and components Custom built systems Part 1: General requirements for solar water heaters and combisystems; Thermal solar systems and components Custom built systems Part 2: Test methods for solar water heaters and combisystems; Thermal solar systems and components
24、 Custom built systems Part 3: Performance test methods for solar water heater stores; Thermal solar systems and components Custom built systems Part 4: Performance test methods for solar combistores; Thermal solar systems and components Custom built systems Part 5: Performance test methods for contr
25、ol equipment.According to the CENCENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
26、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom4BS EN 129771:2018EN 12977-1:2018 (E)Introductiona) Drinking water qu
27、alityIn respect of potential adverse effects on the quality of drinking water intended for human consumption caused by the product covered by this document, it should be noted that1) this document provides no information as to whether the product may be used without restriction in any of the Member
28、States of the EU or EFTA,2) while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force.b) Factory made and custom built solar heating systemsEN 129761, EN 129762, FprEN 129771, EN 129772, EN
29、 129773, EN 129774 and EN 129775 distinguish two categories of solar heating systems:1) factory made solar heating systems; and2) custom built solar heating systems.The classification of a system as factory made or custom built is a choice of the final supplier, in accordance with the following defi
30、nitions.3) Factory made solar heating systems are batch products with one trade name, sold as complete and ready to install kits, with fixed configurations. Systems of this category are considered as a single product and assessed as a whole.If a factory made solar heating system is modified by chang
31、ing its configuration or by changing one or more of its components, the modified system is considered as a new system. Requirements and test methods for factory made solar heating systems are given in EN 129761 and EN 129762.4) Custom built solar heating systems are either uniquely built or assemble
32、d by choosing from an assortment of components. Systems of this category are regarded as a set of components. The components are separately tested and test results are integrated to an assessment of the whole system. Requirements for custom built solar heating systems are given in EN 129771, test me
33、thods are specified in EN 12977-1, EN 12977-2, EN 12977-3, EN 12977-4 and EN 12977-5. Custom built solar heating systems are subdivided into two categories:i) large custom built systems are uniquely designed for a specific situation. In general, they are designed by HVAC engineers, manufacturers or
34、other experts;ii) small custom built systems offered by a company are described in a so-called assortment file, in which all components and possible system configurations, marketed by the company, are specified. Each possible combination of a system configuration with components from the assortment
35、is considered as one custom built system.Table 1 shows the division for different system types.Table 1 Division for factory made and custom built solar heating systemsFactory made solar heating systems ( EN 12976-1 and EN 12976-2 )Custom built solar heating systems ( EN 12977-1 , EN 12977-2 , EN 129
36、77-3 , EN 12977-4 and EN 12977-5 )Integral collectorstorage systems for domestic hot water preparationForced circulation systems for hot water preparation and/or space heating/cooling, assembled using components and configurations described in a documentation file (mostly small systems)Thermosiphon
37、systems for domestic hot water preparation5BS EN 129771:2018EN 12977-1:2018 (E)Factory made solar heating systems ( EN 12976-1 and EN 12976-2 )Custom built solar heating systems ( EN 12977-1 , EN 12977-2 , EN 12977-3 , EN 12977-4 and EN 12977-5 )Forced circulation systems as batch product with fixed
38、 configuration for domestic hot water preparationUniquely designed and assembled systems for hot water preparation and/or space heating/cooling (mostly large systems)NOTE 1 Forced circulation systems can be classified either as factory made or as custom built, depending on the market approach chosen
39、 by the final supplier.NOTE 2 Both factory made and custom built systems for domestic hot water preparation are performance tested under the same set of basic reference conditions as specified in EN 12976-2:2017, Annex B and in EN 129772:2018, Annex A. In practice, the installation conditions may di
40、ffer from these reference conditions.NOTE 3 Solar heating systems for both heating and cooling can so far not be performance tested; if the cooling option is not considered, then the solar heating system can be performance tested as a space heating system.6BS EN 129771:2018EN 12977-1:2018 (E)1 Scope
41、This European Standard specifies requirements on durability, reliability and safety of small and large custom built solar heating and cooling systems with liquid heat transfer medium in the collector loop for residential buildings and similar applications.This European Standard also contains require
42、ments on the design process of large custom built systems.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates
43、t edition of the referenced document (including any amendments) applies.EN 253, District heating pipes Preinsulated bonded pipe systems for directly buried hot water networks Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethyleneEN 307, Heat exchangers
44、Guidelines to prepare installation, operating and maintenance instructions required to maintain the performance of each type of heat exchangersEN 8061, Specifications for installations inside buildings conveying water for human consumption Part 1: GeneralEN 8062, Specification for installations insi
45、de buildings conveying water for human consumption Part 2: DesignEN 809, Pumps and pump units for liquids Common safety requirementsEN 162971, Pumps Rotodynamic pumps Glandless circulators Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)EN 1489
46、, Building valves Pressure safety valves Tests and requirementsEN 1490, Building valves Combined temperature and pressure relief valves Tests and requirementsEN 199113, Eurocode 1 Actions on structures Part 1-3: General actions Snow loadsEN 199114, Eurocode 1: Actions on structures Part 1-4: General
47、 actions Wind actionsEN 199311, Eurocode 3: Design of steel structures Part 1-1: General rules and rules for buildingsEN 199911, Eurocode 9: Design of aluminium structures Part 1-1: General structural rulesEN 129751:2006+A1:2010, Thermal solar systems and components Solar collectors Part 1: General
48、requirementsEN 129761:2017, Thermal solar systems and components Factory made systems Part 1: General requirementsEN 129772:2018, Thermal solar systems and components Custom built systems Part 2: Test methods for solar water heaters and combisystemsEN 129775:2018, Thermal solar systems and component
49、s Custom built systems Part 5: Performance test methods for control equipmentEN 603351, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1)EN 60335221, Household and similar electrical appliances Safety Part 2-21: Particular requirements for storage water heaters (IEC 60335-2-21)EN ISO 9806:2017, Solar energy Solar thermal collectors Test methods (ISO 9806:2017)7BS EN 129771:201
