1、 Reference number ISO/IEC 17878:2003(E) ISO/IEC 2003INTERNATIONAL STANDARD ISO/IEC 17878 Second edition 2003-04-01Information technology Telecommunications and information exchange between systems Private Integrated Services Network Inter-exchange signalling protocol Private User Mobility (PUM) Call
2、 handling additional network features Technologies de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Protocole de signalisation dinterchange Mobilit de lusager priv (PUM) Caractristiques additionnelles de rseau de traitement dappel ISO/IEC 17878:
3、2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading thi
4、s file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General In
5、fo relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below
6、. ISO/IEC 2003 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member bod
7、y in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2003 All rights reservedISO/IEC 17878:2003(E) ISO/IEC 2003 All rights reserved iii Conten
8、ts Foreword vi Introduction vii 1 Scope 1 2 Conformance 1 3 Normative references 1 4 Terms and definitions 3 4.1 External definitions 3 4.2 Alternative identifier 3 4.3 Home data base (HDB) 4 4.4 Rerouteing PINX 4 4.5 PUMI-detect PINX 4 4.6 Terminal equipment (TE) 4 4.7 Visitor data base (VDB) 4 5 L
9、ist of acronyms 4 6 Signalling protocol for the support of ANF-PUMI 5 6.1 ANF-PUMI description 5 6.2 ANF-PUMI operational requirements 5 6.2.1 Requirements on the Rerouteing PINX 5 6.2.2 Requirements on the PUMI-detect PINX 5 6.2.3 Requirements on the Home PINX 5 6.2.4 Requirements on the Visitor PI
10、NX 5 6.2.5 Requirements on a Transit PINX 5 6.3 ANF-PUMI coding requirements 6 6.3.1 Operations 6 6.3.2 Information elements 8 6.3.3 Messages 9 6.4 ANF-PUMI state definitions 9 6.4.1 States at the Rerouteing PINX 9 6.4.2 States at the PUMI-detect PINX 9 6.4.3 States at the Home PINX 9 6.4.4 States a
11、t the Visitor PINX 9 6.5 ANF-PUMI signalling procedures for invocation and operation 9 6.5.1 Actions at the Rerouteing PINX 9 6.5.2 Actions at the PUMI-detect PINX 10 6.5.3 Actions at the Home PINX 11 6.5.4 Actions at the Visitor PINX 12 6.5.5 Actions at a Transit PINX 12 6.5.6 Actions at an Origina
12、ting PINX 12 6.6 ANF-PUMI impact of interworking with public ISDNs 12 6.7 ANF-PUMI impact of interworking with non-ISDNs 12 6.8 Protocol interactions between ANF-PUMI and other supplementary services and ANFs 12 6.8.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 13 6.8.2 Inter
13、action with Connected Name Identification Presentation (SS-CONP) 13ISO/IEC 17878:2003(E) iv ISO/IEC 2003 All rights reserved 6.8.3 Interaction with Call Completion to Busy Subscriber (SS-CCBS) 13 6.8.4 Interaction with Call Completion on No Reply (SS-CCNR) 13 6.8.5 Interaction with Call Transfer (SS
14、-CT) 13 6.8.6 Interaction with Call Forwarding Unconditional (SS-CFU) 13 6.8.7 Interaction with Call Forwarding Busy (SS-CFB) 13 6.8.8 Interaction with Call Forwarding No Reply (SS-CFNR) 13 6.8.9 Interaction with Call Deflection (SS-CD) 13 6.8.10 Interaction with Path Replacement (ANF-PR) 13 6.8.11
15、Interaction with Call Offer (SS-CO) 13 6.8.12 Interaction with Call Intrusion (SS-CI) 13 6.8.13 Interaction with Do Not Disturb (SS-DND) 14 6.8.14 Interaction with Do Not Disturb Override (SS-DNDO) 14 6.8.15 Interaction with Advice Of Charge (SS-AOC) 14 6.8.16 Interaction with Recall (SS-RE) 14 6.8.
16、17 Interaction with Call Interception (ANF-CINT) 14 6.8.18 Interaction with Transit Counter (ANF-TC) 14 6.8.19 Interaction with Route Restriction Class (ANF-RRC) 14 6.8.20 Interaction with Message Waiting Indication (SS-MWI) 15 6.8.21 Interaction with Wireless Terminal Location Registration (SS-WTLR
17、) 15 6.8.22 Interaction with Wireless Terminal Incoming Call (ANF-WTMI) 15 6.8.23 Interaction with Wireless Terminal Outgoing Call (ANF-WTMO) 16 6.8.24 Interaction with Wireless Terminal Authentication of the Terminal (SS-WTAT) 16 6.8.25 Interaction with Wireless Terminal Authentication of the Netwo
18、rk (SS-WTAN) 16 6.8.26 Interaction with Private User Mobility Registration (ANF-PUMR) 16 6.8.27 Interaction with Private User Mobility Outgoing Call (ANF-PUMO) 16 6.8.28 Interactions with Common Information (ANF-CMN) 16 6.8.29 Interaction with Call Priority Interruption (Protection) (SS-CPI(P) 16 6.
19、9 ANF-PUMI parameter values (timers) 16 6.9.1 Timer T1 16 6.9.2 Timer T2 16 7 Signalling protocol for the support of ANF-PUMO 16 7.1 ANF-PUMO description 16 7.2 ANF-PUMO operational requirements 17 7.2.1 Requirements on the Originating PINX 17 7.2.2 Requirements on the Home PINX 17 7.2.3 Requirement
20、s on a Transit PINX 17 7.3 ANF-PUMO coding requirements 17 7.3.1 Operations 17 7.3.2 Information elements 17 7.3.3 Messages 17 7.4 ANF-PUMO State definitions 17 7.4.1 States at the Originating PINX 17 7.4.2 States at the Home PINX 17 7.5 ANF-PUMO signalling procedures 18 7.5.1 Actions at the Origina
21、ting PINX 18 7.5.2 Actions at the Home PINX 18 7.5.3 Actions at the Transit PINX 19 7.6 ANF-PUMO impact of interworking with public ISDNs 19 7.7 ANF-PUMO impact of interworking with non-ISDNs 19 7.8 Protocol interactions between ANF-PUMO and other supplementary services and ANFs 19ISO/IEC 17878:2003
22、(E) ISO/IEC 2003 All rights reserved v 7.8.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 19 7.8.2 Interaction with Connected Name Identification Presentation (SS-CONP) 19 7.8.3 Interaction with Call Completion to Busy Subscriber (SS-CCBS) 19 7.8.4 Interaction with Call Comple
23、tion on No Reply (SS-CCNR) 19 7.8.5 Interaction with Call Transfer (SS-WT) 19 7.8.6 Interaction with Call Diversion (SS-CFU, SS-CFB, SS-CFNR, SS-CD) 19 7.8.7 Interaction with Path Replacement (ANF-PR) 19 7.8.8 Interaction with Call Offer (SS-CO) 19 7.8.9 Interaction with Call Intrusion (SS-CI) 20 7.
24、8.10 Interaction with Do Not Disturb (SS-DND) 20 7.8.11 Interaction with Do Not Disturb Override (SS-DNDO) 20 7.8.12 Interaction with Advice of Charge (SS-AOC) 20 7.8.13 Interaction with Recall (SS-RE) 20 7.8.14 Interaction with Call Interception (ANF-CINT) 20 7.8.15 Interaction with Transit Counter
25、 (ANF-TC) 20 7.8.16 Interaction with Route Restriction Class (ANF-RRC) 20 7.8.17 Interaction with Message Waiting Indication (SS-MWI) 20 7.8.18 Interaction with Wireless Terminal Location Registration (SS-WTLR) 20 7.8.19 Interaction with Wireless Terminal Incoming Call (ANF-WTMI) 20 7.8.20 Interacti
26、on with Wireless Terminal Outgoing Call (ANF-WTMO) 20 7.8.21 Interaction with Wireless Terminal Authentication of the Terminal (SS-WTAT) 20 7.8.22 Interaction with Wireless Terminal Authentication of the Network (SS-WTAN) 20 7.8.23 Interaction with Private User Mobility Registration (ANF-PUMR) 20 7.
27、8.24 Interaction with Private User Mobility Incoming Call (ANF-PUMI) 20 7.8.25 Interaction with Common Information (ANF-CMN) 20 7.8.26 Interaction with Call Priority Interruption (Protection) (SS-CPI(P) 21 7.9 Parameter values (timers) 21 7.9.1 Timers at the Originating PINX 21 7.9.2 Timers at the H
28、ome PINX 21 Annexes A - Protocol Implementation Conformance Statement (PICS) proforma 22 B - Imported ASN.1 definitions 33 C - Examples of Message Sequences 34 D - Specification and Description Language (SDL) representation of procedures 39 E - Additional feature identifier in module Common-Informat
29、ion-Operations 47 F - ASN.1 definitions according to ITU-T Recs. X.208 / X.209 48ISO/IEC 17878:2003(E) vi ISO/IEC 2003 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwi
30、de standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in f
31、ields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafte
32、d in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an Interna
33、tional Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO
34、/IEC 17878 was prepared by ECMA (as ECMA-284) and was adopted, under a special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. This second edition cancels and replaces the first edition (ISO/
35、IEC 17878:2000), which has been technically revised. ISO/IEC 17878:2003(E) ISO/IEC 2003 All rights reserved vii Introduction This International Standard is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series u
36、ses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. This International Standard specifies the signalling protocol for use at the Q reference point for Private User Mobility call handling additional n
37、etwork features ANF-PUMI and ANF-PUMO. This International Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC 1, ITU-T, ETSI and other international and national standardization bodies. It re
38、presents a pragmatic and widely based consensus. ISO/IEC 2003 All rights reserved 1 1S c o p e This International Standard specifies the signalling protocol for the support of the Private User Mobility call handling additional network features (ANF-PUMI and ANF-PUMO) at the Q reference point between
39、 Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN). ANF-PUMI is a feature that directs incoming calls to a PUM user within the PISN regardless of the PUM users geographical location within the PISN, provided that the PUM users
40、 location is known. ANF-PUMO permits the PISN to process call requests from a PUM user at the home location, if required. The Q reference point is defined in ISO/IEC 11579-1. Service specifications are produced in three stages and according to the method specified in ITU-T Rec. I.130. This Internati
41、onal Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 17877. The signalling protocol for ANF-PUMI and ANF-PUMO operates on top of the signalling protocol for basic circuit switched cal
42、l control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582. This International Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference
43、 point between ANF-PUMI / ANF-PUMO and other supplementary services and ANFs. This International Standard is applicable to PINXs which can interconnect to form a PISN. 2 Conformance In order to conform to this International Standard, a PINX shall satisfy the requirements identified in the Protocol I
44、mplementation Conformance Statement (PICS) proforma in annex A. 3 Normative references ISO/IEC 11571:1998, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Networks - Addressing ISO/IEC 11572:2000, Information technology - Telecommuni
45、cations and information exchange between systems - Private Integrated Services Network - Circuit mode bearer services - Inter-exchange signalling procedures and protocol ISO/IEC 11574:2000, Information technology - Telecommunications and information exchange between systems - Private Integrated Serv
46、ices Network - Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and information flows ISO/IEC 11579-1:1994, Information technology - Telecommunications and information exchange between systems - Private integrated services network - Part 1: Reference configuratio
47、n for PISN Exchanges (PINX) ISO/IEC 11582:2002, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Generic functional protocol for the support of supplementary services - Inter-exchange signalling procedures and protocol The f
48、ollowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. INTERNATIONAL STANDARD ISO/IEC 17878:2003(E)Informatio
49、n technology Telecommunications and information exchange between systems Private Integrated Services Network Inter-exchange signalling protocol Private User Mobility (PUM) Call handling additional network features ISO/IEC 17878:2003(E) 2 ISO/IEC 2003 All rights reserved ISO/IEC 13241:1997, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Inter-exchange signalling protocol - Route Restriction Class additional network featu
