1、 Reference number ISO 9660:1988/Amd.1:2013(E) ISO/IEC 2013INTERNATIONAL STANDARD ISO 9660 First edition 1988-04-15 AMENDMENT 1 2013-05-01 Information processing Volume and file structure of CD-ROM for information interchange AMENDMENT 1 Traitement de linformation Structure de volume et de fichier de
2、s disques optiques compacts mmoire fixe (CD-ROM) destins lchange dinformation AMENDEMENT 1 ISO 9660:1988/Amd.1:2013(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
3、means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Gen
4、eva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2013 All rights reservedISO 9660:1988/Amd.1:2013(E) ISO 2013 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International
5、 Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of
6、technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint t
7、echnical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee ar
8、e circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not b
9、e held responsible for identifying any or all such patent rights. Amendment 1 to ISO 9660:1988 was prepared by Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 23, Digitally Recorded Media for Information Interchange and Storage. This amendment is intended to bring harmoniz
10、ation between ISO 9660 and widely used “Joliet Specification“. ISO 9660:1988/Amd.1:2013(E) ISO 2013 All rights reserved 1Information processing Volume and file structure of CD-ROM for information interchange AMENDMENT 1 In subclause 6.7 “Volume descriptors“, after the line - Supplementary Volume Des
11、criptor insert the following line. - Enhanced Volume Descriptor Add the following subclause 6.7.1.3 after subclause 6.7.1.2 6.7.1.3 The sequence may contain zero or more Enhanced Volume Descriptors (see 8.5) each recorded at least once. An Enhanced Volume Descriptor shall describe the Volume Space,
12、and identify the attributes of the volume, the locations of a Root Directory and of group Path Tables, and the number of volumes in the Volume Set. It shall also identify the coded graphic character set used within selected fields of this descriptor, and of the fields in associated File Descriptors,
13、 Directory Descriptors and Path Tables. Renumber subclauses 6.7.1.3 to 6.7.1.4, 6.7.1.4 to 6.7.1.5, and 6.7.1.5 to 6.7.1.6. In subclause 6.8.2 replace the following sentence The root of the hierarchy, called the Root Directory, shall be a directory identified either in a Primary Volume Descriptor or
14、 in a Supplementary Volume Descriptor. with The root of the hierarchy, called the Root Directory, shall be a directory identified in a Primary Volume Descriptor, Supplementary Volume Descriptor or Enhanced Volume Descriptor. In subclause 6.8.2.1 replace the following sentences The number of levels i
15、n the hierarchy shall not exceed eight. In addition, for each file recorded, the sum of the following shall not exceed 255: with ISO 9660:1988/Amd.1:2013(E) 2 ISO 2013 All rights reservedFor a Directory Hierarchy identified in a Primary Volume Descriptor or in a Supplementary Volume Descriptor, the
16、number of levels in the hierarchy shall not exceed eight. For a Directory Hierarchy identified in an Enhanced Volume Descriptor, the number of levels in the hierarchy may exceed eight. In addition, for each file recorded, the sum of the following shall not exceed 255: In subclause 6.8.3 replace foll
17、owing sentence Each additional Directory Hierarchy shall be identified in a Supplementary Volume Descriptor. with Each additional Directory Hierarchy shall be identified in a Supplementary Volume Descriptor or an Enhanced Volume Descriptor. In subclause 6.9.1 replace following sentence If two Direct
18、ory Identifiers do not contain the same number of byte positions, the shorter Directory Identifier shall be treated as if it were padded on the right with all padding bytes set to (20), and as if both Directory Identifiers contained the identical number of byte positions. with If two Directory Ident
19、ifiers do not contain the same number of byte positions, the shorter Directory Identifier shall be treated as if it were padded on the right with all padding bytes set to FILLER (see 7.4.3.2), and as if both Directory Identifiers contained the identical number of byte positions. Replace subclause 7.
20、4.3 “Separators“ 7.4.3 Separators The characters separating the components of a File Identifier shall be SEPARATOR 1 represented by the bit combination (2E) SEPARATOR 2 represented by the bit combination (3B) with 7.4.3 Separators and Filler 7.4.3.1 Separators The characters separating the component
21、s of a File Identifier within a Directory Hierarchy that is identified in a Primary Volume Descriptor or in a Supplementary Volume Descriptor shall be SEPARATOR 1 represented by the bit combination (2E) SEPARATOR 2 represented by the bit combination (3B) A File Identifier within a Directory Hierarch
22、y that is identified in an Enhanced Volume Descriptor shall not be separated into components. SEPARATORs are not specified for a File Identifier within a Directory Hierarchy that is identified in an Enhanced Volume Descriptor. ISO 9660:1988/Amd.1:2013(E) ISO 2013 All rights reserved 37.4.3.2 Filler
23、The character filling any byte position which is specified by this International Standard to be characters shall be referred to as FILLER. Within a volume that is identified by a Primary Volume Descriptor or by a Supplementary Volume Descriptor, the bit combination of FILLER shall be (20). Within a
24、volume that is identified by an Enhanced Volume Descriptor, the bit combination of FILLER shall be subject to agreement between the originator and the recipient of the volume. In following subclauses replace all “(20)“ with “FILLER“. 7.4.5, 8.4.20, 8.4.21, 8.4.22, 8.4.23, 8.4.24, 8.4.25, 8.5.14, 8.5
25、.15, 8.5.16, 8.5.17, 8.5.18, 8.5.19, 9.3 a), 9.3 b) Add the following lines at the end of subclause 7.4.4 The character in the fields of the following descriptors is the subject of an agreement between the originator and the recipient of the volume. - Directory Records within a Directory Hierarchy t
26、hat is identified in an Enhanced Volume Descriptor; - Path Table Records within a Path Table Group identified in an Enhanced Volume Descriptor; - Extended Attribute Records identified in a directory of a Directory Hierarchy that is identified in an Enhanced Volume Descriptor. In subclause 7.5.1 “Fil
27、e Identifier format“ replace following line This sequence shall meet the following requirements: with Within a Directory Hierarchy that is identified in a Primary Volume Descriptor or in a Supplementary Volume Descriptor, this sequence shall meet the following requirements: Add the following lines a
28、t the end of subclause 7.5.1 “File Identifier format“ Within a Directory Hierarchy that is identified in an Enhanced Volume Descriptor, this sequence shall meet the following requirements: - the Length of File Name shall not exceed 207. - no SEPARATORs are specified. - no File Name Extension is pres
29、ent. - no File Version Number is present. ISO 9660:1988/Amd.1:2013(E) 4 ISO 2013 All rights reservedWithin a Directory Hierarchy that is identified in an Enhanced Volume Descriptor, a File Identifier shall not be specified as certain character sequences. These sequences shall be subject to agreement
30、 between the originator and recipient of the volume. NOTE - 207 (the maximum length of the File Name) is the 254 (the maximum Directory Record Length), subtracted by 33 (the minimum length of Directory Record excluding the File Identifier) and by 14 (the CD- ROM XA System Use Extension Information)
31、(see PHILIPS and SONY, System Description CD-ROM XA, 1991-05). Replace subclause 7.5.2 “File Identifier length“ 7.5.2 File Identifier length The length of the File Identifier shall be the sum of the following: - if there is a File Name, the length of the File Name, - if there is a File Name Extensio
32、n, the length of the File Name Extension, - the number of digits in the File Version Number, - 2 (the number of SEPARATORs). with 7.5.2 File Identifier length The length of the File Identifier shall be the sum of the following: - if there is a File Name, the length of the File Name, - if there is a
33、File Name Extension, the length of the File Name Extension, - if there is a File Version Number, the number of digits in the File Version Number, - if SEPARATORs are specified, 2 (the number of SEPARATORs). Add the following lines at the end of subclause 7.6.1 “Directory Identifier Format“ Within a
34、volume identified by an Enhanced Volume Descriptor, a Directory Identifier can be sequence of characters rather than d-characters or d1-characters. The sequence shall be subject to agreement between the originator and recipient of the volume. Replace subclause 7.6.3 “Directory Identifier length“ 7.6
35、.3 Directory Identifier length The length of a Directory Identifier shall not exceed 31. with 7.6.3 Directory Identifier length ISO 9660:1988/Amd.1:2013(E) ISO 2013 All rights reserved 5Within a Directory Hierarchy that is identified in a Primary Volume Descriptor or in a Supplementary Volume Descri
36、ptor, the length of a Directory Identifier shall not exceed 31. Within a Directory Hierarchy that is identified in an Enhanced Volume Descriptor, the length of a Directory Identifier shall not exceed 207. In subclause 8.1.1 “Volume Descriptor Type (BP 1)“ replace the line Number 2 shall mean that th
37、e Volume Descriptor is a Supplementary Volume Descriptor; with Number 2 shall mean that the Volume Descriptor is a Supplementary Volume Descriptor or an Enhanced Volume Descriptor; In subclause 8.4.30 “File Structure Version (BP 882)“ replace the line 1 shall indicate the structure of this Internati
38、onal Standard. with For a Primary Volume Descriptor or for a Supplementary Volume Descriptor, 1 shall indicate the structure of this International Standard. For an Enhanced Volume Descriptor, 2 shall indicate the structure of this International Standard. In subclause 8.5 “Supplementary Volume Descri
39、ptor“ replace the following line 8.5 Supplementary Volume Descriptor with 8.5 Supplementary Volume Descriptor and Enhanced Volume Descriptor In subclause 8.5 replace the following description The Supplementary Volume Descriptor shall identify the volume, with The Supplementary Volume Descriptor or t
40、he Enhanced Volume Descriptor shall identify the volume, Replace the title of Table 6 Table 6 - Supplementary Volume Descriptor with Table 6 - Supplementary Volume Descriptor and Enhanced Volume Descriptor ISO 9660:1988/Amd.1:2013(E) 6 ISO 2013 All rights reservedIn Table 6, replace four “a1-charact
41、ers“ with “a1-characters*“. In Table 6, replace two “d1-characters“ with “d1-characters*“. In Table 6, replace the three “d1-characters, SEPARATOR 1, SEPARATOR 2“ with “d1-characters, SEPARATOR 1, SEPARATOR 2*“. Add the following footer note to Table 6 NOTE - * denotes case of Supplementary Volume D
42、escriptor. In subclause 8.5.1 “Volume Descriptor Type (BP 1)“ replace the following line This field shall specify an 8-bit number indicating that the Volume Descriptor is a Supplementary Volume Descriptor. with This field shall specify an 8-bit number indicating that the Volume Descriptor is a Suppl
43、ementary Volume Descriptor or is an Enhanced Volume Descriptor. In subclause 8.5.2 “Volume Descriptor Version (BP 7)“ replace the following lines This field shall specify an 8-bit number indicating that the Volume Descriptor is a Supplementary Volume Descriptor. 1 shall indicate the structure of thi
44、s International Standard. with This field shall specify an 8-bit number indicating that the Volume Descriptor is a Supplementary Volume Descriptor or is an Enhanced Volume Descriptor. For a Supplementary Volume Descriptor, 1 shall indicate the structure of this International Standard. For an Enhance
45、d Volume Descriptor, 2 shall indicate the structure of this International Standard. In subclause 8.5.4 “System Identifier (BP 9 to 40)“ replace the following line The characters in this field shall be a1-characters. with Within a Supplementary Volume Descriptor, the characters in this field shall be
46、 a1-characters. Within an Enhanced Volume Descriptor, the characters in this field shall be subject to agreement between the originator and recipient of the volume. In subclause 8.5.5 “Volume Identifier (BP 41 to 72)“ replace the following line The characters in this field shall be d1-characters. wi
47、th ISO 9660:1988/Amd.1:2013(E) ISO 2013 All rights reserved 7Within a Supplementary Volume Descriptor, the characters in this field shall be d1-characters. Within an Enhanced Volume Descriptor, the characters in this field shall be subject to agreement between the originator and recipient of the vol
48、ume. In subclause 8.5.13 “Volume Set Identifier (BP 191 to 318)“ replace the following line The characters in this field shall be d1-characters. with Within a Supplementary Volume Descriptor, the characters in this field shall be d1-characters. Within an Enhanced Volume Descriptor, the characters in
49、 this field shall be subject to agreement between the originator and recipient of the volume. In subclauses 8.5.14 “Publisher Identifier (BP 319 to 446)“, 8.5.15 “Data Preparer Identifier (BP 447 to 574)“ and 8.5.16 “Application Identifier (BP 575 to 702)“ replace the following line The characters in this field shall be a1-characters. with Within a Supplementary Volume Descriptor, the characters in this field shall be a1-characters. Within an Enhanced Volume Descriptor, the characters in this field shall be subject to agreement betwe