欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    ISO 2896-2001 Rigid cellular plastics - Determination of water absorption《硬质泡沫塑料 吸水性的测定》.pdf

    • 资源ID:1253065       资源大小:255.50KB        全文页数:16页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    ISO 2896-2001 Rigid cellular plastics - Determination of water absorption《硬质泡沫塑料 吸水性的测定》.pdf

    1、Reference number ISO 2896:2001(E) ISO 2001 INTERNATIONAL STANDARD ISO 2896 Third edition 2001-07-01 Rigid cellular plastics Determination of water absorption Plastiques alvolaires rigides Dtermination de labsorption deauISO 2896:2001(E) PDF disclaimer This PDF file may contain embedded typefaces. In

    2、 accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Ado

    3、bes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for

    4、 printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2001 All rights reserved. Unless otherwise specified, no part of

    5、this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-

    6、1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.ch Web www.iso.ch Printed in Switzerland ii ISO 2001 All rights reservedISO 2896:2001(E) ISO 2001 All rights reserved iii Contents Page Foreword.iv 1 Scope 1 2 Normative references 1 3 Principle1 4 Materials .1 5 Apparat

    7、us .1 6 Specimens4 7 Procedure .5 8 Corrections for swelling and cut surfaces5 9 Expression of results 7 10 Precision and accuracy.8 11 Test report 9 Annex A (normative) Determination of average cell diameter (see 8.1.3.1) 10ISO 2896:2001(E) iv ISO 2001 All rights reserved Foreword ISO (the Internat

    8、ional Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has bee

    9、n established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical stand

    10、ardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at lea

    11、st 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 2896 was prepar

    12、ed by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 10, Cellular plastics. This third edition cancels and replaces the second edition (ISO 2896:1987), which has been technically revised. Annex A forms a normative part of this International Standard.INTERNATIONAL STANDARD ISO 2896:2001(E)

    13、ISO 2001 All rights reserved 1 Rigid cellular plastics Determination of water absorption 1 Scope This International Standard specifies a method for the determination of the water absorption of rigid cellular plastics by measuring the buoyant force on a test specimen after immersion under a 50 mm hea

    14、d of water for 4 days. Corrections are specified to take account of any change in volume of the specimen and also to correct for the volume of water in the cut surface cells of the specimen. The water absorption is expressed as the average, for several specimens, of the percentage increase in volume

    15、 relative to the original volume. The method described is intended for quality control and for use in product specifications. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For d

    16、ated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For u

    17、ndated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 291:1997, Plastics Standard atmospheres for conditioning and testing ISO 1923:1981, Cellular plastics and rubbers Determinati

    18、on of linear dimensions 3P r i n c i p l e The water absorption of a material is determined by measurement of the buoyant force on a specimen immersed in distilled water for a specified time. 4 Materials 4.1 Distilled water, de-aerated (by storage for at least 48 h after distillation), for use as th

    19、e immersion liquid. 5 Apparatus 5.1 Balance, accurate to 0,1 g and capable of suspending the cage (5.2). 5.2 Underwater-weighing cage, made of a stainless material not attacked by distilled water and large enough to contain a test specimen. A sinker heavy enough to compensate for the upthrust produc

    20、ed by the test specimen shall be attached to the base of the cage. The cage shall be fitted with a means of suspending it from the balance. See Figure 1 for an example. 5.3 Cylindrical vessel, at least 250 mm in diameter and 250 mm in height. 5.4 Low-permeability plastic film, for example polyethyle

    21、ne.ISO 2896:2001(E) 2 ISO 2001 All rights reserved Key 1 Mesh cage 2 Specimen 3S i n k e r Figure 1 Test specimen in mesh underwater-weighing cage 5.5 Slicer: cutting-blade apparatus capable of preparing thin specimens (0,1 mm to 0,4 mm thick) for cell size viewing. Figure 2 shows an acceptable appa

    22、ratus. 5.6 Slide assembly, consisting of two pieces of slide glass hinged by tape along one edge, between which is placed a calibrated scale (3 cm in length) printed on a thin plastic sheet (see Figure 3). 5.7 Projector: conventional 35 mm slide projector that accepts standard 50 mm 50 mm slides, or

    23、 a projection microscope with a calibrated scale.ISO 2896:2001(E) ISO 2001 All rights reserved 3 NOTE The spacer thickness is chosen to give the required viewing-specimen thickness. Figure 2 Razor-blade equipment for slicing cellular plastics for determination of average cell diameterISO 2896:2001(E

    24、) 4 ISO 2001 All rights reserved Dimensions in millimetres Key 1 Calibrated glass slide 2 Flexible tape hinge 3 Blank cover glass 4 Cell-count scales Figure 3 Slide assembly 6 Specimens 6.1 Number of specimens At least three specimens shall be tested. 6.2 Dimensions Specimens shall be at least 500 c

    25、m 3 in volume, with a nominal length of 150 mm and a nominal width of 150 mm. For materials produced and sold with natural or laminated skin surfaces, the thickness shall be as produced. For materials produced with a thickness greater than 75 mm and without skin surfaces, the material shall be trimm

    26、ed to 75 mm in thickness for testing. The distance between two faces shall not vary by more than 1 % (tolerance of parallelism). 6.3 Preparation and conditioning Surfaces of specimens shall be smooth and free from dust. Dry the specimens in a desiccator at ambient temperature until the results of tw

    27、o successive weighings, at intervals of at least 12 h, do not differ by more than 1 % of their mean.ISO 2896:2001(E) ISO 2001 All rights reserved 5 7 Procedure 7.1 Operate in a room where the temperature is maintained in accordance with ISO 291. Unless otherwise specified 1 , conditions shall be (23

    28、 2) C and (50 5) % relative humidity. 7.2 Weigh a specimen to the nearest 0,1 g (mass m 1 ). 7.3 Measure the dimensions of the specimen in accordance with ISO 1923 for the calculation of V 0 . 7.4 Fill the cylindrical vessel (5.3) with de-aerated distilled water (4.1) at ambient temperature. 7.5 Imm

    29、erse the assembled cage (5.2), remove any bubbles, attach it to the balance and determine the apparent mass (m 2 ) to the nearest 0,1 g. 7.6 Place the specimen in the cage. Re-immerse the cage so that the distance between the surface of the water and the top surface of the specimen is approximately

    30、50 mm. Remove obvious air bubbles from the specimen with a brush or by agitation. 7.7 Cover the cylindrical vessel with low-permeability plastic film (5.4). 7.8 After (96 1) h, or another agreed immersion period, remove the plastic film and determine the apparent mass (m 3 ), to the nearest 0,1 g, o

    31、f the submerged cage containing the specimen. 7.9 Visually examine the specimen for evidence of swelling. To determine corrections for swelling and cut surfaces, follow procedure A (8.1) for uniform swelling and procedure B (8.2) for non-uniform swelling. 7.10 Carry out the above procedure for each

    32、specimen individually. 8 Corrections for swelling and cut surfaces 8.1 Procedure A (uniform swelling) 8.1.1 Applicability Use procedure A when there is no evidence of non-uniform deformation of the specimen. 8.1.2 Correction for uniform swelling Remove the specimen from the water and re-measure its

    33、dimensions within 4 h of removal. The correction for uniform swelling of the specimen S 0 is 10 0 0 VV S V where V 0 is the original volume, in cubic centimetres, of the specimen (see 9.1); 1) For tropical countries, test conditions will normally be (27 2) Can d(65 5) % relative humidity.ISO 2896:20

    34、01(E) 6 ISO 2001 All rights reserved 111 1 1000 dlb V d 1 being the specimen thickness, in millimetres, after immersion; l 1 being the specimen length, in millimetres, after immersion; b 1 being the specimen width, in millimetres, after immersion. 8.1.3 Correction for the volume of water in the cut

    35、surface cells 8.1.3.1 Using the method described in annex A, determine the average cell diameter D of a specimen obtained from the same sample of material as that from which the water absorption specimens were taken. Use this average cell diameter D, expressed in millimetres, to calculate the volume

    36、 V c of the surface cells cut during specimen preparation as follows: 8.1.3.1.1 For samples with natural or laminated skin surfaces: c 0,54 ( ) 500 Dl d bd V 8.1.3.1.2 For samples having cut cells on all surfaces: c 0,54 ( ) 500 Dldldbd V 8.1.3.2 For samples with an average cell diameter of less tha

    37、n 0,50 mm and a specimen volume of at least 500 cm 3 , the correction for cut surface cells is relatively small (less than 3,0 %) and may be omitted. 8.2 Procedure B (non-uniform swelling) 8.2.1 Applicability Use procedure B when there is evidence of non-uniform deformation of the specimen. 8.2.2 Co

    38、mbined correction for swelling and the volume of water in the cut surface cells Obtain a cylindrical vessel similar to the one described in 5.3 but fitted with an overflow. Fill this vessel with water until it runs from the overflow. When the water level has stabilized, place a graduated receptacle

    39、of capacity at least 600 cm 3 under the overflow. This receptacle shall be capable of allowing the volume of water deposited in it to be measured to 0,5 cm 3 (this may be done by weighing). Remove the specimen and cage from the original vessel. Allow them to drain until the surface water has run off

    40、 (approximately 2 min). Carefully immerse the specimen and cage in the water-filled vessel and determine the volume of water displaced V 2 . Repeat this procedure with the empty cage to determine its volume V 3 . The combined swelling and cut surface correction factor S 1 is given by 230 1 0 VVV S V

    41、 where V 0 is the original volume of the specimen (see 9.1).ISO 2896:2001(E) ISO 2001 All rights reserved 7 9 Expression of results 9.1 Calculate the original volume of the specimen using the equation 1000 dlb V where V 0 is the original volume, in cubic centimetres, of the specimen; d is the origin

    42、al thickness, in millimetres, of the specimen; l is the original length, in millimetres, of the specimen; b is the original width, in millimetres, of the specimen. 9.2 Calculate the water absorption WA V , expressed as a percentage by volume, as follows: 9.2.1 If procedure A (8.1) was used: 31 12c V

    43、 0 () WA 100 mV mmV V where is the density of water (= 1 g/cm 3 ). 9.2.2 If procedure B (8.2) was used: 32312 V 0 ()() WA 100 mVVmm V where is the density of water (= 1 g/cm 3 ). 9.3 Calculate the average water absorption for all specimens tested.ISO 2896:2001(E) 8 ISO 2001 All rights reserved 10 Pr

    44、ecision and accuracy 10.1 Precision Table 1 Precision data All values in volume % except where otherwise stated Material Thickness mm Average water absorption s r s R rR Polyisocyanurate 75 2,06 0,138 0,049 0,039 1,36 Extruded polystyrene 75 0,17 0,042 0,08 0,12 0,23 where s r is the within-laborato

    45、ry standard deviation for the indicated material (obtained by pooling the within-laboratory standard deviations of the test results from all the participating laboratories): s r = ( s 1 ) 2 +( s 2 ) 2 + . (s n ) 2 /n 1/2 s R is the between-laboratory reproducibility, expressed as a standard deviatio

    46、n; r is the within-laboratory critical interval between two test results (= 2,8 s r ); R is the between-laboratory critical interval between two test results (= 2,8 s R ). NOTE This table is based on a round robin conducted in 1996 in accordance with ASTM E 691, Standard Practice for Conducting an I

    47、nterlaboratory Study to Determine the Precision of a Test Method, and involving two materials tested by seven laboratories. For each material, all the samples were prepared at one source, but the individual specimens were prepared at the laboratories which tested them. Each test result was the avera

    48、ge of three individual determinations. Each laboratory obtained one test result for each material. 10.2 Concept of r and R in Table 1 If s r and s R have been calculated from a large enough body of data, and for test results that are averages from testing three specimens, then the following statemen

    49、ts apply: Repeatability: Two test results obtained within one laboratory shall be judged not equivalent if they differ by more than the r-value for that material, r being the interval representing the critical difference between two test results for the same material, obtained by the same operator using the same equipment on the same day in the same laboratory. Reproducibility: Two test results obtained by different laboratories shal


    注意事项

    本文(ISO 2896-2001 Rigid cellular plastics - Determination of water absorption《硬质泡沫塑料 吸水性的测定》.pdf)为本站会员(feelhesitate105)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开