1、 Reference number ISO 26429-4:2008(E) ISO 2008INTERNATIONAL STANDARD ISO 26429-4 First edition 2008-09-01 Digital cinema (D-cinema) packaging Part 4: MXF JPEG 2000 application Emballage du cinma numrique (cinma D) Partie 4: Application MXF JPEG 2000 ISO 26429-4:2008(E) PDF disclaimer This PDF file m
2、ay contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the res
3、ponsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creat
4、ion parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 200
5、8 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the coun
6、try of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2008 All rights reservedISO 26429-4:2008(E) ISO 2008 All rights reserved iii Foreword ISO (the Internation
7、al Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been e
8、stablished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standard
9、ization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for vo
10、ting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all su
11、ch patent rights. ISO 26429-4 was prepared by the Society of Motion Picture and Television Engineers (as SMPTE 429-4-2006) and was adopted, under a special “fast-track procedure”, by Technical Committee ISO/TC 36, Cinematography, in parallel with its approval by the ISO member bodies. ISO 26429 cons
12、ists of the following parts, under the general title Digital cinema (D-cinema) packaging: Part 3: Sound and picture track file Part 4: MXF JPEG 2000 application Part 6: MXF track file essence encryption Part 7: Composition playlist ISO 26429-4:2008(E) ISO 2008 All rights reserved 1Table of Contents
13、1 Scope 3 2 Normative References 3 3 Introduction . 3 4 Sampling Constraints 3 5 JPEG 2000 Codec Constraints . 4 6 MXF Mapping Constraints. 4 6.1 KLV Coding Constraints 4 6.1.1 Essence Element Key 4 6.2 UL Constraints for D-Cinema 4 6.2.1 Essence Container UL . 4 6.2.2 Picture Essence Compression UL
14、 . 5 6.3 Application Issues . 5 6.4 Essence Descriptors . 5 6.4.1 RGBA Picture Essence Descriptor 5 6.4.2 JPEG 2000 Picture Sub Descriptor . 6 Annex A Bibliography (Informative) 8 Page 1 of 8 pages SMPTE 429-4-2006 SMPTE STANDARD D-Cinema Packaging MXF JPEG 2000 Application Copyright 2006 by THE SOC
15、IETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue, White Plains, NY 10601 (914) 761-1100 Approved October 3, 2006 ISO 26429-4:2008(E) 2 ISO 2008 All rights reservedSMPTE 429-4-2006 Page 2 of 8 pages Foreword SMPTE (the Society of Motion Picture and Television Engineers) is an internati
16、onally-recognized standards developing organization. Headquartered and incorporated in the United States of America, SMPTE has members in over 80 countries on six continents. SMPTEs Engineering Documents, including Standards, Recommended Practices and Engineering Guidelines, are prepared by SMPTEs T
17、echnology Committees. Participation in these Committees is open to all with a bona fide interest in their work. SMPTE cooperates closely with other standards-developing organizations, including ISO, IEC and ITU. SMPTE Engineering Documents are drafted in accordance with the rules given in Part XIII
18、of its Administrative Practices. This SMPTE document was prepared by the Technology Committee DC28 on Digital Cinema Technology in coordination with the Technology Committee W25 on Metadata and Wrappers. Introduction SMPTE 422M defines the mapping of any compliant JPEG2000 codestream into the MXF ge
19、neric container and defines Keys, ULs and Essence Descriptor definitions. This document further defines the MXF mapping for Digital Cinema application. ISO 26429-4:2008(E) ISO 2008 All rights reserved 3 SMPTE 429-4-2006 Page 3 of 8 pages 1 Scope SMPTE 422M defines the mapping of any compliant JPEG 2
20、000 codestream into the MXF generic container and provides Keys, ULs and essence descriptor definitions. This standard further defines the MXF mapping details and constraints for application within D-Cinema. 2 Normative References The following standards contain provisions which, through reference i
21、n this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of the standar
22、ds indicated below. SMPTE 377M-2004, Television Material Exchange Format (MXF) File Format Specification SMPTE 422M-2006, Material Exchange Format (MXF) Mapping JPEG 2000 Codestreams into the MXF Generic Container SMPTE 428-1-2006, D-Cinema Distribution Master Image Characteristics SMPTE 429-3-2006,
23、 D-Cinema Packaging Sound and Picture Track File ISO/IEC 15444-1:2004, Information Technology JPEG 2000 Image Coding System: Core Coding System ISO/IEC 15444-1:2004/Amd 1:2006, Profiles for Digital Cinema Applications 3 Introduction The MXF Generic Container (GC) is fully described in SMPTE 379M. SM
24、PTE 422M specifies the mapping of JPEG 2000 codestreams as a Picture Element that may be used in the Picture Item of the MXF Generic Container. ISO-IEC 15444-1 Amd 1 specifies the JPEG 2000 profiles for use in D-Cinema applications. This standard specifies the mapping of D-Cinema profiles of JPEG 20
25、00 coded pictures into the MXF Generic Container. Glossaries of acronyms, terms and data types used by the Material Exchange Format (MXF) are defined in SMPTE 377M and SMPTE 379M. Glossaries of definitions, abbreviations and symbols used by JPEG 2000 are defined in ISO-IEC 15444-1. 3.1 Acronyms (Inf
26、ormative) Some of the acronyms used in this document are listed here for information: DCDM: Digital Cinema Digital Master KAG: KLV Alignment Grid KLV: Key Length Value UL: Universal Label 4 Sampling Constraints The source picture sampling shall comply with SMPTE 428-1. ISO 26429-4:2008(E) 4 ISO 2008
27、 All rights reservedSMPTE 429-4-2006 Page 4 of 8 pages 5 JPEG 2000 Codestream Restrictions The JPEG 2000 codestreams shall be restricted according to ISO-IEC 15444-1 Amd 1. This amendment defines two profiles for D-Cinema usage referred to in this standard as 2K and 4K. 6 MXF Mapping Constraints The
28、 D-Cinema application shall use only frame-based wrapping as defined in SMPTE 422M. There shall only be one picture essence track in the MXF file as defined in SMPTE 429-3. 6.1 KLV Coding Constraints The KLV coding structure is defined in SMPTE 422M section 5. This section defines specific values fo
29、r the D- Cinema application. 6.1.1 Essence Element Key The Essence Element Key is defined in SMPTE 422M Table 1. The specific values for the D-Cinema application shall be as defined in Table 1 below. Table 1 Specification of the D-Cinema Constrained JPEG 2000 Picture Element Key Value Byte No. Descr
30、iption Value (hex) Meaning 113 See SMPTE 422M See SMPTE 422M As defined in SMPTE 422M 14 Essence Element Count 01h Count of Picture Elements in the Picture item 15 Essence Element Type 08h JPEG 2000 Frame-wrapped Picture Element 16 Essence Element Number 01h The Number (used as an Index) of this Pic
31、ture Element in the Picture Item 6.2 UL Constraints 6.2.1 Essence Container UL The Essence Container UL is defined in SMPTE 422M Table 2. The specific values for the D-Cinema application shall be as defined in Table 2. Table 2 Specification of the Essence Container Label Byte No. Description Value (
32、hex) Meaning 1-14 See SMPTE 422M See SMPTE 422M As defined in SMPTE 422M 15 Content Kind 01h Frame-wrapped Picture Element 16 Reserved 00h ISO 26429-4:2008(E) ISO 2008 All rights reserved 5 SMPTE 429-4-2006 Page 5 of 8 pages 6.2.2 Picture Essence Compression UL The Picture Essence Compression UL is
33、defined in SMPTE 422M Table 3. The specific values for the D- Cinema application shall be as defined in Table 3. Table 3 Specification of the Picture Essence Compression Label Byte No. Description Value (hex) Meaning 1-15 See SMPTE 422M See SMPTE 422M As defined in SMPTE 422M 16 JPEG 2000 Codestream
34、 Restrictions 03h 04h Identifies codestream restrictions for the 2K D-Cinema profile. Identifies codestream restrictions for the 4K D-Cinema profile 6.3 Application Issues SMPTE 429-3 defines the Operational Pattern and the use of the KAG , the KLV Fill and Index Tables for D- Cinema applications. 6
35、.4 Essence Descriptors This section gives guidance in the use of MXF descriptors for use with this application specification. MXF files conforming to this specification shall use the RGBA Picture Essence Descriptor defined in SMPTE 377M together with the JPEG 2000 Picture Sub Descriptor defined in S
36、MPTE 422M. The identification of the picture components is provided through the values of the PixelLayout Item of the RGBA Picture Essence Descriptor as defined in SMPTE 377M Annex E2.46. The DCDM color components X, Y and Z shall be coded respectively using the hexadecimal code values D8h, D9h and
37、DAh. NOTE These values represent the ISO 7-bit character codes for the letters: X, Y and Z with the most significant bit of each byte set to 1. This distinguishes the DCDM color components from the X, Y and Z character values already defined in SMPTE 377M Annex E 2.46. Other picture essence sub-desc
38、riptors may be added to provide additional description of D-Cinema pictures. 6.4.1 RGBA Picture Essence Descriptor (Informative) Table 4 below illustrates the RGBA Picture Essence Descriptor fields that should be used in D-Cinema applications. For simplicity and readability, not all columns defined
39、in SMPTE 377M are shown in the table. Designers should note that the values given here are for guidance only and should not be used verbatim. NOTE The RGBA Picture Essence Descriptor includes all the properties from the File Descriptor, the Generic Picture Essence Descriptor and the RGBA Picture Ess
40、ence Descriptor as defined in SMPTE 377M. Those properties that are for MXF management or are optional are not shown in table 4 below except where useful benefit is gained. In particular, Table 4 does not define the set Key value nor its Length field, as these are defined in SMPTE 377M. For clarity,
41、 not all columns of the descriptor are shown in Table 4, particularly the Local Tag, UL Designator, Req and Meaning columns. Please refer to SMPTE 377M Annex D for these values. ISO 26429-4:2008(E) 6 ISO 2008 All rights reservedSMPTE 429-4-2006 Page 6 of 8 pages Table 4 Specification of Values for t
42、he D-Cinema application RGBA Picture Essence Descriptor Item Name Type Len 2K Values 4K Values Linked Track ID UInt32 4 Sample Rate Rational 8 24,1 48,1 Essence Container UL 16 See Table 2 Picture Essence Coding UL 16 See Table 3 Frame layout UInt8 1 0 Stored Width UInt32 4 2048. Lower values may be
43、 used where permitted by the appropriate DCDM operational level 4096. Lower values may be used where permitted by the appropriate DCDM operational level Stored Height UInt32 4 1080. Lower values may be used where permitted by the appropriate DCDM operational level 2160. Lower values may be used wher
44、e permitted by the appropriate DCDM operational level Aspect Ratio Rational 8 256,135 by default. Other values are used where the pixel array does not fully occupy the DCDM operational level. Video Line Map Array of Int32 16 2, 4, 0, 0 (each value is Int32) Gamma UL 16 See SMPTE RP 224 (D-Cinema spe
45、cific value) Component Max Ref UInt32 4 4095 Component Min Ref UInt32 4 0 Pixel Layout 8-byte array 8 D8.0C.D9.0C.DA.0C.00.00 in hexadecimal code Sub Descriptors 8+16n 24 1, 16, UID (JPEG 2000 Picture Sub Descriptor Instance UID Value). 6.4.2 JPEG 2000 Picture Sub Descriptor (Informative) Table 5 pr
46、ovides additional guidance for the values of the required individual properties used in the JPEG2000 Picture Sub Descriptor. Designers should note that the values given here are for guidance only and should not be used verbatim. For simplicity and readability, not all columns defined in SMPTE 422M a
47、re shown in Table 5. Neither are the rows that define the Key and Length shown. Please refer to SMPTE 422M for the full description of this table. ISO 26429-4:2008(E) ISO 2008 All rights reserved 7 SMPTE 429-4-2006 Page 7 of 8 pages Table 5 Specification of Values for the D-Cinema application JPEG 2
48、000 Picture Sub Descriptor Element Name Type Len 2K Values 4K Values Rsiz UInt16 2 03h (2K D-Cinema application) 04h (4K D-Cinema application) Xsiz UInt32 4 2048. Lower values may be used where permitted by the appropriate DCDM operational level 4096. Lower values may be used where permitted by the
49、appropriate DCDM operational level. Ysiz UInt32 4 1080. Lower values may be used where permitted by the appropriate DCDM operational level 2160. Lower values may be used where permitted by the appropriate DCDM operational level. XOsiz UInt32 4 0 YOsiz UInt32 4 0 XTsiz UInt32 4 2048 or less 4096 or less YTsiz UInt32 4 1080 or less 2160 or less XTOsiz UInt32 4 0 YTOsiz UInt32 4 0 Csiz UInt32 4 3 Picture Component Sizing J2K Component SizingArray 8+3n 3,3,11,1,1,11
