1、 ISO 2016 Road vehicles Symbols for controls, indicators and tell-tales AMENDMENT 5 Vhicules routiers Symboles pour les commandes, indicateurs et tmoins AMENDEMENT 5 INTERNATIONAL STANDARD ISO 2575 Eighth edition 2010-07-01 Reference number ISO 2575:2010/Amd.5:2016(E) AMENDMENT 5 2016-06-01 ISO 2575
2、:2010/Amd.5:2016(E)ii ISO 2016 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including pho
3、tocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41
4、22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO 2575:2010/Amd.5:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried o
5、ut through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO c
6、ollaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different ap
7、proval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be th
8、e subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). An
9、y trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in
10、the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information Amendment 5 to ISO 2575:2010 was prepared by Technical Committee ISO/TC 22, Road Vehicles, Subcommittee SC 39, Ergonomics. ISO 2016 All rights reserved iii Road vehicles Symbols for controls, indicators
11、 and tell-tales AMENDMENT 5 Annex A and Annex J Add the following Notes in Annex A and Annex J according to the symbol number. Symbol number Symbol description/application ISO/IEC registration number A.36 Automatic high beam NOTE It is possible to position the letter “A” or alternative word “AUTO” o
12、n or adjacent to the outline of the symbol. ISO 7000-2956 A.37 Automatic low beam NOTE It is possible to position the letter “A” or alternative word “AUTO” on or adjacent to the outline of the symbol. ISO 7000-2957 J.14 Stability control system NOTE In case of Stability control off or not available,
13、 it is possible to position the symbol Y.01 (OFF) below the outline of the symbol. ISO 7000-2630 Page 42, Annex J Delete the symbol J.15 Stability control off or not available. ISO 2575:2010/Amd.5:2016(E) ISO 2016 All rights reserved 1 ISO 2575:2010/Amd.5:2016(E) ISO 2016 All rights reserved ICS 43.040.30; 01.080.20 Price based on 1 page
