1、Reference number ISO 10303-512:1999(E) ISO 1999 INTERNATIONAL STANDARD ISO 10303-512 First edition 1999-12-15 Industrial automation systems and integration Product data representation and exchange Part 512: Application interpreted construct: Faceted boundary representation Systmes dautomatisation in
2、dustrielle et intgration Reprsentation et change de donnes de produits Partie 512: Construction interprte dapplication: Reprsentation dlimite des facesISO 10303-512:1999(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be print
3、ed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no lia
4、bility in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is
5、suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 1999 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
6、 any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 734 10 79 E-mail copyrightiso.ch Web www.iso.ch Printed in Switzerland ii ISO 1999 All rights reserved